1. Tutorial 6 Mobile Communication Networks Mohamed Esam

2. Air Interface

3. Base Stations

4. GSM channels Physical channel: Certain time slot at certain frequency Logical channel: Types of Data in the physical channel

5. Logical Channels Traffic Channel (TCH) Control Channel (CCH) Full rate(/F) Half Rate(/H) One Eight (/8) Broadcast Channel (BCH) Common Control Channel (CCCH) Dedicated Control Channel (DCCH) Cell Broadcast Channel (CBCH) Frequency Correction channel (FCCH) Synchronization Channel (SCH) Broadcast Control Channel (BCCH) Standalone Dedicated Control Channel (SDCCH) Slow Associated Control Channel (SACCH) Fast Associated Control Channel (FACCH) Paging Channel (PCH) Random Access Channel (RACH) Access Grant Channel (AGCH)

6. Traffic Channels Traffic means voice transmission. Full Rate: 22.8Kbps, and speech coding 13Kbps. Half Rate: 11.4Kbps, and speech coding 6.5Kbps. One Eight: For signaling or SMS’s.

7. Control Channels To control the network performance. You can note the sequence to establish a call. BCH: FCCH: Carrier signal to inform the MS with carrier frequency. SCH: Define the frame number of the cell and Base Station Identification Code (BSIC) BCCH: Send information about the cell. Send Location Area Identity (LAI) of the neighbor MSC’s. Send Max. allowed power of the MS. Carrier frequencies of the neighbor cells. Downlink Point to Multipoint @TS0

8. CCCH: PCH: (downlink) MS listen to the paging channel to know if the paging message is for it or not. If yes it means that there is a call or SMS for it. It uses in IMSI (International Mobile Subscriber Identity) RACH: (uplink) To reply on PCH Send request for dedicated channel (SDCCH) AGCH: (downlink) Reply for the request of SDCCH with the time slot No. Point to Point

9. DCCH: SDCCH: (Downlink) For call signaling setup. Operates at TCH/8 or TCH/4. SACCH: Downlink  to inform the MS power level. Uplink  to inform the BS with the MS power level. FACCH: For handover by stealing 20 ms from the speech. CBCH: (Downlink) Each cell sends a short message to all MS’s every 2 ms to broadcast the users with information from a service center to mobile stations.

10. Burst Each logical channel is backed into something called Burst and each logical channel has a one type of the burst types. The Burst is sent via physical channel (time slot @ certain frequency(. Burst (logical Channel) Time Slot X of Carrier Y Period = 0.577 mSec

11. GSM Frames

12. Burst Types Normal Frequency Correction Synchronization Access Dummy

13. 6 1 3 5 7 2 4 Omni Cell planning 6 1 3 5 7 2 4 120 Sectorization 6 3 5 7 2 4 1 60 Sectorization 8 10 1 7 2 3 4 9 6 12 5 11 (Most Common) Tricell planning: (Most Common) No. of cells in the cluster can be divided by 3

14. Tricell planning D1 D2 D3 C3 C2 C1 A3 A2 A1 B3 B2 B1 D1 D2 D3 C3 C2 C1 A3 A2 A1 B3 B2 B1 D1 D2 D3 C3 C2 C1 A3 A2 A1 B3 B2 B1 D1 D2 D3 C3 C2 C1 A3 A2 A1 B3 B2 B1 D1 D2 D3 C3 C2 C1 A3 A2 A1 B3 B2 B1 D1 D2 D3 C3 C2 C1 A3 A2 A1 B3 B2 B1 D1 D2 D3 C3 C2 C1 A3 A2 A1 B3 B2 B1 D1 D2 D3 C3 C2 C1 A3 A2 A1 B3 B2 B1

15. Thanks