1. ULTRASONIC WATER AND FLOW METERS
ELIS PLZEŇ a. s. PRODUCTS
ULTRASONIC WATER AND FLOW METERS
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic
ELIS PLZEŇ a. s., Luční 15, Plzeň, Cyech Republic

2. ULTRASONIC FLOW METERS
Intended for measurement of conductive and non- conductive clean liquids as water, demineralized water, fuel, oil, etc.
Principal: transit time (measurement of time of flying ultrasonic beam from one to second transductor in direction of flow and in opposite direction of flow).
The flow rate is calculated from difference of time.
Flow meters are produced in single and dual beam version.
They don’t have any moving parts
They have min. pressure loses
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

3. ULTRASONIC FLOW METERS
Produced categories of ultrasonic flow meters:
Battery supplied single or dual beam:
FLOMIC FL5024, FL5044 (DN32 to DN200)
FLOMIC FL5034, FL5054 (DN32 to DN300)
FLOMIC FL3085 (DN200 to DN1200)
FLOMIC FL3005 (DN200 to DN2000) for direct assembly into piping
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

4. ULTRASONIC FLOW METERS
Main powered single or dual beam:
SONOELIS SE404X, SE406X (DN32 to DN300)
SONOELIS SE401X, SE402X (DN200 to DN1200)
SONOELIS SE804X, SE806X (DN200 to DN1200) for direct assembly in to piping
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

5. BATTERY POWERED ULTRASONIC WATER METERS
FLOMIC FL5024 (single beam) FLOMIC FL5044 (dual beam)
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

6. BATTERY POWERED ULTRASONIC WATER METERS
FLOMIC FL5024 (single beam)
FLOMIC FL5044 (dual beam)
Certified according to MID (European metrology certificate)
and OIML R49
Designed in observance of standard EN14154
Intended for measurement of clean water and substitution of mechanical water meters WOLTMAN type
Intended for diagnostic of general condition of water network and water leakages in piping
They can measure instantaneous flow rate in both direction, consumption of water, pressure
They don’t have any moving parts
They have very low pressure loses
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

7. BATTERY POWERED ULTRASONIC WATER METERS
FLOMIC FL5024 (single beam), FLOMIC FL5044 (dual beam)
Nominal diameter: DN32 to DN200 (single beam), DN65 to DN200 (dual beam)
Technical parameters
FLOMIC FL5024
FLOMIC FL5044
Nominal diameter 32 40 50 65 80
100
125
150
200
Overload flow [m3/hr]
12,5 20
31,25
78,75
312,5
500
Permanent flow [m3/hr] 10 16 25 63
160
250
400
Transition flow [m3/hr]
0,32
0,512
0,8
1,28
2,016
3,2
5,12
8,0
12,8
0,64
1,0
1,6
2,5
4,0
6,4
Min. flow [m3/hr]
0,2
0,5
1,26
2,0
5,0
0,4
0,63
Pulse number [liters/pulse]
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

8. BATTERY POWERED ULTRASONIC WATER METERS
FLOMIC FL5024 (single beam)
FLOMIC FL5044 (dual beam)
Material of sensor: casting from cast iron
Connection: flanges (EN, ANSI, JIS)
Water pressure class: MAP16
Temperature class: T50
Flow-profile sensitivity class: U5 (FL5044), U10 (FL5024) – in front of meter D3 (FL5044), D5 (FL5024) – behind meter
Pressure loss class: ∆P10
Climatic and mechanical class: B
Electromagnetic environment: E1, E2
Display unit: single-line 8 character LC display
Flow rate sampling period: 1 sec
Protection class: IP68
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

9. BATTERY POWERED ULTRASONIC WATER METERS
FLOMIC FL5024 (single beam)
FLOMIC FL5044 (dual beam)
Power supply: Li battery 3,6 V/19Ah – live time 8 years
Output: passive pulse output (U= 3 to 30V, I = 0,002 to 10mA, timp = 30ms)
passive current output 4 to 20mA
(U = 10 to 24 V)
Optional equipment: bi-directional measurement (± passive pulse output)
passive current output 4 to 20mA in combination of electrical contact for flow direction
USB, RS232 or RS232 + USB converter
GSM module FLODAT FD1.00
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

10. BATTERY POWERED ULTRASONIC WATER METERS
FLOMIC FL5024 (single beam)
FLOMIC FL5044 (dual beam)
BASIC DIMENSIONS and WEIGHT
Diameter 32 40 50 65 80
100
125
150
200
L [mm]
260
300
350
S [mm]
140
145
155
160
165
180
190
205
Weight [kg]
4,5 7 10 11 15
17,5
22,5 26
36,5
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

11. BATTERY POWERED ULTRASONIC FLOW METERS
FLOMIC FL5034 (single beam) FLOMIC FL5054 (dual beam) 11
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

12. BATTERY POWERED ULTRASONIC FLOW METERS
FLOMIC FL5034 (single beam)
FLOMIC FL5054 (dual beam)
Intended for measurement of clean water
They can measure instantaneous flow rate in both direction, consumption of water, pressure
They don’t have any moving parts
They have very low pressure loses 12
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

13. BATTERY POWERED ULTRASONIC FLOW METERS
FLOMIC FL5034 (single beam), FLOMIC FL5054 (dual beam)
Nominal diameter: DN32 to DN300 (single beam), DN40 to DN300 (dual beam)
Technical parameters
FL5034
FL5054
Nominal diameter 32 40 50 65 80
100
125
150
200
250
300
Overload flow [m3/hr] 20
31,25
78,75
312,5
500
787,5
1250
Permanent flow [m3/hr] 16 25 63
160
400
630
1000
Transition flow [m3/hr]
0,4
0,635
1,02
1,6
2,52
4,0
5,0
6,3
12,8
20,1
32,0
0,32
0,51
0,8
1,28
2,05
2,56
3,2
6,4
10,08
16,0
Min. flow [m3/hr]
0,25
0,397
1,0
1,587
2,54
3,17
3,97
8,0
12,6
20,0
0,2
0,5
2,0
10,0
Pulse number [liters/pulse] 10 13
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

14. BATTERY POWERED ULTRASONIC FLOW METERS
FLOMIC FL5034 (single beam)
FLOMIC FL5054 (dual beam)
Material of sensor: weldment (measuring part is made from ss-steel , flanges and cover from carbon steel)
Connection: flanges (EN, ANSI, JIS)
Water pressure class: MAP16, MAP40
Temperature class: T50
Flow-profile sensitivity class: U5 (FL5044), U10 (FL5024) – in front of meter
D3 (FL5044), D5 (FL5024) – behind meter
Pressure loss class: ∆P10
Climatic and mechanical class: B
Electromagnetic environment: E1, E2
Display unit: single-line 8 character LC display 14
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

15. BATTERY POWERED ULTRASONIC FLOW METERS
FLOMIC FL5034 (single beam)
FLOMIC FL5054 (dual beam)
Flow rate sampling period: 1 sec
Power supply: Li battery 3,6 V/19Ah – live time 8 years
Protection class: IP68
Output: passive pulse output (U= 3 to 30V, I = 0,002 to 10mA, timp = 30ms)
passive current output 4 to 20mA (U = 10 to 24V)
Optional equipment: complete ss-sensor
bi-directional measurement (± passive pulse output)
passive current output 4 to 20mA in combination of electrical contact for flow direction
USB, RS232 or RS232 + USB converter
GSM module FLODAT FD1.00 15
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

16. BATTERY POWERED ULTRASONIC FLOW METERS
FLOMIC FL5034 (single beam)
FLOMIC FL5054 (dual beam)
BASIC DIMENSIONS and WEIGHT
Diameter 32 40 50 65 80
100
125
150
200
250
300
L [mm]
360
450
S [mm]
175
180
185
190
210
225
235
255
280
305
Weight [kg] 1,6 MPa 18 19 20 29 46 59
Weight [kg] 4,0 MPa 10 12 13 16 21 22 38 71 85
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

17. BATTERY POWERED ULTRASONIC FLOW METERS
FLOMIC FL3085 (single beam) 17
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

18. BATTERY POWERED ULTRASONIC FLOW METERS
FLOMIC FL3085 (single beam)
Intended for measurement of clean water in big dimensions
Measurement of instantaneous flow rate in both direction and consumption of water
Storage data
They don’t have any moving parts
They have very low pressure loses 18
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

19. BATTERY POWERED ULTRASONIC FLOW METERS
FLOMIC FL3085 (single beam)
Nominal diameter: DN200 to DN1200
Material of sensor: weldment, material from carbon steel, painted
Connection: flanges (EN, ANSI, JIS)
Nominal pressure: PN6, PN10, PN16, PN40
Temperature of liquid: 0 to 150°C
Ultrasonic transductors: 2 pcs of US2.1 (manufactured by ELIS PLZEŇ a. s.)
Display unit: single-line 8 character LC display
Power supply: Li-battery + 2 x Alkali batteries 9V, live time 4 years
Transductors connection cable: max. 20m
Accuracy: ±1% in range 1:20 19
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

20. BATTERY POWERED ULTRASONIC FLOW METERS
FLOMIC FL3085 (single beam)
Flow rate sampling period: 1 sec
Protection class: of electronic: IP65
Protection of sensor: IP54/IP68
Outputs: passive pulse output (U= 30V, I = 10mA) passive current output 4 to 20mA
(U = 24V)
Optional equipment: complete ss-sensor
bi-directional measurement (± passive pulse output)
passive current output 4 to 20mA in combination of electrical contact for flow direction
USB, RS232 or RS232 + USB converter 20
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

21. BATTERY POWERED ULTRASONIC FLOW METERS
FLOMIC FL3085 (single beam) 21
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

22. BATTERY POWERED ULTRASONIC FLOW METERS
FLOMIC FL3005 (single beam) 22
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

23. BATTERY POWERED ULTRASONIC FLOW METERS
FLOMIC FL3005 (single beam) 23
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

24. BATTERY POWERED ULTRASONIC FLOW METERS
FLOMIC FL3005 (single beam)
Intended for measurement of clean water on big piping
Installation directly to existing piping
Measurement of instantaneous flow rate in both direction and consumption of water
Theoretical calibration after installation
Storage data 24
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

25. BATTERY POWERED ULTRASONIC FLOW METERS
FLOMIC FL3005 (single beam)
Nominal diameter: DN200 to DN2000
Nominal pressure: PN40
Temperature of liquid: 0 to 150°C
Ultrasonic transductors: 2 pcs of US2.1 (manufactured by ELIS PLZEN a. s.)
Display unit: single-line 8 character LC display
Flow rate sampling period: 1 sec
Power supply: Li-battery + 2 x Alkali batteries 9V,
live time 4 years
Transductors connection cable: max. 20m
Protection class of electronic: IP65
Protection of sensor: IP54/IP68 25
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

26. BATTERY POWERED ULTRASONIC FLOW METERS
FLOMIC FL3005 (single beam)
Output: passive pulse output (U= 3 to 30V, I = 10mA) passive current output 4 to 20mA, (U = 24V) communication interface RS232
Accuracy: ± 2% in range 1:20
Optional equipment: bi-directional measurement (± passive pulse output)
passive current output 4 to 20mA in combination of electrical contact for flow direction
USB, RS232 or RS232 + USB converter 26
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

27. MAIN POWERED ULTRASONIC FLOW METERS
SONOELIS SE404X (single beam) SONOELIS SE406X (dual beam) 27
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

28. MAIN POWERED ULTRASONIC FLOW METERS
SONOELIS SE404X (single beam)
SONOELIS SE406X (dual beam)
Intended for measurement of non conductive and conductive clean liquids as water, demineralized water, condensate, fuel, diesel, oil
Measurement of instantaneous flow rate in both direction and consumption of water
Measurement of mass flow and mass of water with connection of temperature sensor Pt100
They don’t have any moving parts
They have very low pressure loses 28
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

29. MAIN POWERED ULTRASONIC FLOW METERS
SONOELIS SE404X (single beam)
SONOELIS SE406X (dual beam)
Nominal diameter: DN32 to DN300
Nominal pressure: PN16, PN40
Measurement accuracy: ±1% for velocity of liquid v>0,5 m/s (SE404X)
±0,5% for velocity of liquid v>0,5 m/s (SE406X)
Temperature of liquid: 0 to 150°C
Ambient temperature: +5 to +55°C
Display unit: alpha-numerical LCD unit, 2 lines, 16 characters each
Power supply: 90 to 230V AC, 50 to 60Hz
Protection class: electronics IP65, sensor IP67 29
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

30. MAIN POWERED ULTRASONIC FLOW METERS
SONOELIS SE404X (single beam)
SONOELIS SE406X (dual beam)
Material of sensor: weldment (measuring part is made from ss-steel , flanges and cover from carbon steel)
Flow-profile sensitivity class: U5 (SE406X), U10 (SE404X) – in front of meter
D3 (SE406X), D5 (SE404X) – behind meter
Outputs: pulse output (selected 0.1 to 1,000 l/pulse)
Frequency output, selected 0 t 1,000 Hz or 10kHz
Relay type 24V AC/0,1A 30
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

31. MAIN POWERED ULTRASONIC FLOW METERS
SONOELIS SE404X (single beam)
SONOELIS SE406X (dual beam)
Optional equipment: communication line RS485
extended temperature range for sensors: - 20° to 180°C
Current output (0)4 to 20mA
Mass-flow rate measurement capability
Flow rate measurement in two directions
sensor protection class IP68
100 m (max.) transductors connection cable 31
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

32. MAIN POWERED ULTRASONIC FLOW METERS
SONOELIS SE404X (single beam)
SONOELIS SE406X (dual beam)
METER VERSION, CONFIGURATION and TYPE DESIGNATION
VERSION
COMPACT
REMOTE
CONFIGURATION
Economic
Standard
Comfort
SINGLE-BEAM SENSOR
SE4040
SE4042
SE4044
SE4041
SE4043
SE4045
DUAL-BEAM SENSOR
SE4060
SE4062
SE4064
SE4061
SE4063
SE4065 32
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

33. MAIN POWERED ULTRASONIC FLOW METERS
SONOELIS SE404X (single beam) SONOELIS SE406X (dual beam) 33
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

34. MAIN POWERED ULTRASONIC FLOW METERS
SONOELIS SE401X (single beam) SONOELIS SE402X (dual beam) 34
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

35. MAIN POWERED ULTRASONIC FLOW METERS
SONOELIS SE401X (single beam)
SONOELIS SE402X (dual beam)
Intended for measurement of non conductive and conductive clean liquids as water, demineralized water
Measurement of instantaneous flow rate in both direction and consumption of water
Measurement of mass flow and mass of water with connection of temperature sensor Pt100
They don’t have any moving parts
They have very low pressure loses 35
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

36. MAIN POWERED ULTRASONIC FLOW METERS
SONOELIS SE401X (single beam)
SONOELIS SE402X (dual beam)
Nominal diameter: DN200 to DN1200
Nominal pressure: PN16, PN40
Measurement accuracy: ±1% for velocity of liquid v>0,5 m/s (SE401X)
±0,5% for velocity of liquid v>0,5 m/s (SE402X)
Temperature of liquid: 0 to 150°C
Ambient temperature: +5 to +55°C
Display unit: alpha-numerical LCD unit, 2 lines, 16 characters each
Power supply: 90 to 230V AC, 50 to 60Hz
Protection class: electronics IP65, sensor IP54 36
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

37. MAIN POWERED ULTRASONIC FLOW METERS
SONOELIS SE401X (single beam)
SONOELIS SE402X (dual beam)
Material of sensor: weldment (material of measuring part flanges from carbon steel)
Flow-profile sensitivity class: U5 (SE402X), U10 (SE401X) – in front of meter
D3 (SE402X), D5 (SE401X) – behind meter
Outputs: pulse output (selected 0.1 to 1,000 l/pulse)
Frequency output, selected 0 t 1,000 Hz or 10kHz
Relay type 24VAC/0,1A 37
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

38. MAIN POWERED ULTRASONIC FLOW METERS
SONOELIS SE401X (single beam)
SONOELIS SE402X (dual beam)
Optional equipment: communication line RS485
extended temperature range for sensors: ° to 180°C
Current output (0)4 to 20mA
Mass-flow rate measurement capability
Flow rate measurement in two directions
sensor protection class IP68
100 m (max.) transductors connection cable 38
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

39. MAIN POWERED ULTRASONIC FLOW METERS
SONOELIS SE401X (single beam)
SONOELIS SE402X (dual beam)
METER VERSION, CONFIGURATION and TYPE DESIGNATION
VERSION
REMOTE
CONFIGURATION
ECONOMIC
STANDARD
COMFORT
SINGLE-BEAM SENSOR
SE4011
SE4013
SE4015
DUAL-BEAM SENSOR
SE4021
SE4023
SE4025 39
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

40. MAIN POWERED ULTRASONIC FLOW METERS
SONOELIS SE401X (single beam) SONOELIS SE402X (dual beam) 40
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

41. MAIN POWERED ULTRASONIC FLOW METERS
SONOELIS SE804X (single beam) SONOELIS SE806X (dual beam) 41
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

42. MAIN POWERED ULTRASONIC FLOW METERS
SONOELIS SE804X (single beam) SONOELIS SE806X (dual beam) 42
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

43. MAIN POWERED ULTRASONIC FLOW METERS
SONOELIS SE804X (single beam)
SONOELIS SE806X (dual beam)
Intended for measurement of clean water on big piping
Installation directly to existing piping
Measurement of instantaneous flow rate in both direction and consumption of water
Measurement of mass flow and mass of water with connection of temperature sensor Pt100
Theoretical calibration after installation 43
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

44. MAIN POWERED ULTRASONIC FLOW METERS
SONOELIS SE804X (single beam)
SONOELIS SE806X (dual beam)
Nominal diameter: DN200 to DN1200
Nominal pressure: PN40
Temperature of liquid: 0° to 150°C
Ultrasonic transductors: 2 pcs of US2.1 (manufactured by ELIS PLZEŇ a. s.)
Display unit: single-line 8 character LC display
Power supply: 90 to 250VAC, 50 to 60Hz
Transductors connection cable: max. 100m
Protection class of electronic: IP65
Protection of sensor: IP54 44
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

45. MAIN POWERED ULTRASONIC FLOW METERS
SONOELIS SE804X (single beam)
SONOELIS SE806X (dual beam)
Output: passive pulse output (U= 3 to 30V, I = 10mA)
passive current output 4 to 20mA, (U = 24V)
communication interface RS232
Accuracy: ± 2% in range 1:20
Optional equipment: communication line RS485
extended temperature range for sensors
-20° to 180°C
Current output (0) 4 to 20mA
Mass-flow rate measurement capability
Flow rate measurement in two directions
sensor protection class IP68
100 m (max.) transductors connection cable 45
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic

46. Thank you for your attention
ELIS PLZEŇ a. s. Luční Plzeň Czech Republic Phone: Fax: 46
ELIS PLZEŇ a. s., Luční 15, Plzeň, Czech Republic