1. Flow chart A,B EMW Test 1 R EMW1 > L Rejected Yes R EMW1 > 0.9 L EMW Test 2 * R EMW2 > L Yes Accepted No EMW : typically tested by TVH with emission worst case driver selectable mode Pollutant (i) R EMW1 P EMW1(i) R EMW2 P EMW2(i) ResultAverage (P EMW1(i), P EMW2(i) ) Flow A: Criteria pollutant test with emission worst case Flow B: CO2 and Fuel consumption test for TVH and TVL (with Predominant mode or Best and worst case mode) Test 1* R1 < Declared value + x % Use declared value Yes Test 2* (R1+R2)/2 < Declared value + x % Test 3* CO2FC R1R1 CO2 R1 FC R1 R2R2 CO2 R2 FC R2 R3R3 CO2 R3 FC R3 TVH or TVL TVH CO2 or TVL CO2 ="Declared value" or "(R1+R2+R3)/3" TVH FC or TVL FC = "Declared value" or "(R1+R2+R3)/3" TVIndCombined app. (TVH CO2, TVL CO2 )Combined app. (TVH FC, TVL FC ) Yes No Use average of three results (R1+R2+R3)/3 * All emission results must comply with the criteria pollutant emission standards. x % shall be discussed. Less than 4%. Test 2* : accept Vehicle_H (or L) test WLTP-08-31e

2. Flow chart C Flow C: Range and EC test for TVH and TVL Test 1* R1 < Declared value + 0 % Use declared value Yes Test 2* (R1+R2)/2 < Declared value + 0 % Test 3* RangeEC R1R1 Range R1 EC R1 R2R2 Range R2 EC R2 R3R3 Range R3 EC R3 TVH or TVL TVH Range or TVL Range ="Declared value" or "(R1+R2+R3)/3" TVH EC or TVL EC = "Declared value" or "(R1+R2+R3)/3" TVIndCombined app. (TVH Range, TVL Range )Combined app. (TVH EC, TVL EC ) Yes No Use average of three results (R1+R2+R3)/3 * All emission results must comply with the criteria pollutant emission standards. 0 % tolerance for Range and EC.

3. Judgment and results Flow chart without declared value Flow chart with declared value Test results Corrected by approved cycle value EM●● CO2● FC-combined● FC-each phase － ● EC-combined● EC-each phase － ● Range- combined ● Range-each phase ●