1. L2B Hall-MEWP Training (November 12) Stage Crew L2 Hall-MEWP Training To enable: Use of Hall Genie AWP-36

2. L2B Hall-MEWP Training (November 12) What is the Aim of this course? Enable you to be competent in the use of the machine Show that you have been properly trained on the safe operation of the machine Highlight the operating instructions, our work rules and applicable governmental standards Teach You how to inspect the entire machine for damage and test machine functions for defective operation

3. L2B Hall-MEWP Training (November 12) Course Structure Theory Theory Test Practical Demonstration Practical Test

4. L2B Hall-MEWP Training (November 12) Why is training required? Provision & Use of Work Equipment Regulations (PUWER) 1998: – Equipment must be in good working order, maintained and repaired, inspected at suitable intervals to ensure machine is safe to operate – Employee must be authorised to use the equipment – Employers must provide adequate training Health & Safety at Work Act (HASWA) 1974: – The employer must provide safe tools, plant and equipment – The employee must not interfere with or misuse equipment provided for safety Management of Health and Safety at Work Regulations (MHSWR) 1999: – Risk Assessments – Competent persons – Provide clear information and training to employees Therefore training must be provided, and risk assessments completed and followed

5. L2B Hall-MEWP Training (November 12) Manual: Safety

6. L2B Hall-MEWP Training (November 12) Manual: Safety Manufactures Manual says: – Do NOT operate until: You have been properly trained on the safe operation of the machine You read and understand these operating instructions, your employers work rules and applicable governmental standards You have inspected the entire machine for damage and tested machine functions for defective operation

7. L2B Hall-MEWP Training (November 12) Manual: Safety

8. L2B Hall-MEWP Training (November 12) Technical Services WaH Risk Assessment Requires persons to have completed L2 Working at Height, and specific training for the machine in use Harnesses, work positioning lanyards, high visibility jackets and hard hats are used as appropriate There must be at least two persons present for any work at height

9. L2B Hall-MEWP Training (November 12) Types of MEWP

10. L2B Hall-MEWP Training (November 12) Considerations Weight of machine Wind Side force Safety systems Function enable Familiarisation

11. L2B Hall-MEWP Training (November 12) Manual: Tilting the Machine

12. L2B Hall-MEWP Training (November 12) Manual: Emergency Release & Outriggers

13. L2B Hall-MEWP Training (November 12) Manual: Controls

14. L2B Hall-MEWP Training (November 12) Manual: AWP-36 Specs Max platform height: 11m Lift capacity: 113Kg Shipping weight: 405Kg

15. L2B Hall-MEWP Training (November 12) Checks User Check – The machine should be checked before each use, by each user – This is to ensure it is in safe condition, and all safety features are operational – If anything is not correct, you should not use the machine, label what is wrong to alert other users, and report it to a person in charge Thorough Check – Every 6 months – By external competent persons – Record on machine

16. L2B Hall-MEWP Training (November 12) Theory Test

17. L2B Hall-MEWP Training (November 12) Practical Stuff