Download presentation
Presentation is loading. Please wait.
Published byLayne Brill Modified over 9 years ago
1
Nominal and no CSR (R 56-1 = 55 mm, R 56-2 = 59 mm, R 56-3 = 0) L1 phase = 21 deg, V 3.9 = 55 MV CSR OFF BC3 OFF Elegant Tracking z1 = 0.275 mm (post BC1 bunch length)
2
Nominal: (R 56-1 = -55 mm, R 56-2 = -59 mm, R 56-3 = 0) L1 phase = -21 deg, V 3.9 = 55 MV x 1.0 m x 0.45 m CSR ON BC3 OFF z1 = 0.275 mm (post BC1 bunch length)
3
New: (R 56-1 = -55 mm, R 56-2 = -49.6 mm, R 56-3 = 0) L1 phase = -23 deg, V 3.9 = 56 MV x 0.77 m x 0.42 m CSR ON BC3 OFF z1 = 0.215 mm (post BC1 bunch length)
4
New: (R 56-1 = -55 mm, R 56-2 = -35.2 mm, R 56-3 = 0) L1 phase = -25 deg, V 3.9 = 59 MV x 0.69 m x 0.39 m CSR ON BC3 OFF z1 = 0.140 mm (post BC1 bunch length)
5
New: (R 56-1 = -55 mm, R 56-2 = -17 mm, R 56-3 = 0) L1 phase = -26 deg, V 3.9 = 65 MV x 0.55 m x 0.38 m CSR ON BC3 OFF z1 = 0.090 mm (post BC1 bunch length)
6
CSR Emittance Growth vs L1 RF phase (i.e., BC1 compression) BC3 OFF
7
Parameter L1 L1 L1 L1 Post BC1 z (mm) 0.2750.2150.1400.090 BC1 E /E (rms) 1.41.51.61.8 BC1 R 56 (mm)55 BC2 R 56 (mm)59.049.635.217.0 V 3.9-GHz (MV)55565965 Final x ( m) 1.00.770.690.55 Final y ( m) 0.450.420.390.38 Compression Parameters Over L1 RF Phase Scan (~1-kA constant peak current)
8
Current Profile is Spiked and Sloped – How to Fix It? ? No CSR
9
Use Harmonic Voltage to Slope the Current Profile (2 nd order chirp) L1 phase and voltage adjusted also
10
Use Harmonic Phase to flatten the Current Profile (3 rd order chirp) L1 phase and voltage, as well as 3.9-GHz voltage all adjusted also
11
Suggested New 100-pC Configuration No DeChirper 8-m DeChirper New Old No CSR
12
New 100-pC Configuration (12 A 1 kA)? * 15/16 cavities powered with 98-MeV injector
Similar presentations
© 2024 SlidePlayer.com. Inc.
All rights reserved.