1. Brausse: the best alternative to established high quality finishing machines Brausse Europe Welcome 90 machines sold in Europe Die cutting Hot foil stamping Folder gluers Handfed platens

2. Brausse: the best alternative to established high quality finishing machines Brausse Europe with its main office and demo centre in 's-Hertogenbosch, the Netherlands, is the exclusive European representative of the Shanghai folding carton division. 90 machines sold in Europe Die cutting Hot foil stamping Folder gluers Handfed platens

3. Brausse 1050 series: Die cutting on 80gr/m2 paper! * 80gr/m2 paper up to 1600gr/m2 cardboard * Fast change over times * 1050 x 750 mm * Very low noise level Brausse Bora 1050E Die cutting Brausse Bora 1050 series Quick lock stripping section 1 mm micro adjustment system with 1 mm plate

4. * Highspeed die cutting 8,000 sh/hr * Quick locking and centre line system * 1060 x 750 mm * Very low noise level Brausse Bora 106E Die cutting Brausse Bora 106E Bora: First class high speed die cutting at mid class price!

5. * Large format die cutting, up to 8mm laminated substrate * Feeder for very warped carton * 1450 x 1100 mm * The best price/performance in this format Infeed trolleys for easy feeding Die cutting Brausse Bora 1450E Quick lock lower stripping Large format die cutting, up to 8mm laminated substrate

6. * 80gr/m2 paper up to 1600gr/m2 cardboard * Hybrid machines, die cutting & hot foil in one * 1050 x 750 mm / 1060 x 750 mm * Centre line system Brausse Signa 106F Hybrid Hot foil stamping Brausse Signa series Quick change table for honeycomb 6 torque motor driven foil rewinder Brausse Bora series: Hot foil stamping on 80gr/m2 paper!

7. NEW Beginning 2015 Brausse Optima series

8. * Maximum production speed: 325 mtr/hr * Width from 550 up to 1450 mm * Solid board up to 800 gr/m2 * Corrugated up to A-Flute Brausse Forza 110 Folder gluers Forza 550 up to 1450mm Electronic batch counter and kicker Upper belt width 20 mm, lower belt width 25 mm Brausse: The best price/performance, your best ratio!

9. Standard accessories * One die chase * Movable cross bar in die chase * One 5 mm hardened cutting plate * Impression adjusting spanner * Flywheel cranking socket spanner Ipsum ML750 Handfed platens Ipsum 750 up to 3000mm Brausse: The best price/performance, your best ratio!

10. Available models: Die cutting Hot foil stamping Folder gluers Handfed platens Brausse Europe is offering SOLUTIONS! Die cutting: Brausse BORA 1050E BORA 106E BORA 1450E Hot foil stamping: Brausse SIGNA 1050F SIGNA 1050F Hybrid SIGNA 106F SIGNA 106F Hybrid Folder gluers: Brausse FORZA 55 FORZA 110 PRIMA 1450 Handfed platens: Ipsum ML750 ML1100 ML1600 ML1800 ML2000 ML2500 ML3000

11. Die cutting Hot foil stamping Folder gluers Handfed platens Brausse Europe is offering SOLUTIONS! www.brausse-europe.com Die cutting quality is being forced upwards unremittingly and the same cutting quality has to be repeatable. Short throughout timescales are required to provide shorter time to market. Customers are looking for solutions, finishers need to differentiate in terms of Costs, Quality and Responsiveness. Brausse Europe Weerdskampweg 15 5222 BA ‘s-Hertogenbosch Netherlands