1. Introduction to Algorithms Rabie A. Ramadan rabie@rabieramadan.org http://www. rabieramadan.org 2 Some of the sides are exported from different sources to clarify the topic

2. Importance of algorithms Algorithms are used in every aspect in our life. Let’s take an Example ……….

3. Example Suppose you are implementing a spreadsheet program, in which you must maintain a grid of cells. Some cells of the spreadsheet contain numbers, but other cells contain expressions that depend on other cells for their value. However, the expressions are not allowed to form a cycle of dependencies: for example, if the expression in cell E1 depends on the value of cell A5, and the expression in cell A5 depends on the value of cell C2, then C2 must not depend on E1.

4. Example Describe an algorithm for making sure that no cycle of dependencies exists (or finding one and complaining to the spreadsheet user if it does exist). If the spreadsheet changes, all its expressions may need to be recalculated. Describe an efficient method for sorting the expression evaluations, so that each cell is recalculated only after the cells it depends on have been recalculated.

5. Another Example Order the following items in a food chain fish human shrimp sheep wheatplankton tiger

6. Solving Topological Sorting Problem Solution: Verify whether a given digraph is a dag and, if it is, produce an ordering of vertices. Two algorithms for solving the problem. They may give different (alternative) solutions. DFS-based algorithm Perform DFS traversal and note the order in which vertices become dead ends (that is, are popped of the traversal stack). Reversing this order yields the desired solution, provided that no back edge has been encountered during the traversal.

7. Example Complexity: as DFS

8. Solving Topological Sorting Problem Source removal algorithm Identify a source, which is a vertex with no incoming edges and delete it along with all edges outgoing from it. There must be at least one source to have the problem solved. Repeat this process in a remaining diagraph. The order in which the vertices are deleted yields the desired solution.

9. Example

10. Source removal algorithm Efficiency Efficiency: same as efficiency of the DFS-based algorithm, but how would you identify a source? A big Problem

11. Analysis of algorithms Issues: Correctness space efficiency time efficiency optimality Approaches: theoretical analysis empirical analysis

12. Space Analysis When considering space complexity, algorithms are divided into those that need extra space to do their work and those that work in place. Space analysis would examine all of the data being stored to see if there were more efficient ways to store it. Example : As a developer, how do you store the real numbers ? Suppose we are storing a real number that has only one place of precision after the decimal point and ranges between -10 and +10. How many bytes you need ?

13. Space Analysis Example : As a developer, how do you store the real numbers ? Suppose we are storing a real number that has only one place of precision after the decimal point and ranges between -10 and +10. How many bytes you need ? Most computers will use between 4 and 8 bytes of memory. If we first multiply the value by 10. We can then store this as an integer between -100 and +100. This needs only 1 byte, a savings of 3 to 7 bytes. A program that stores 1000 of these values can save 3000 to 7000 bytes. It makes a big difference when programming mobile or PDAs or when you have large input.

14. Theoretical analysis of time efficiency Time efficiency is analyzed by determining the number of repetitions of the basic operation as a function of input size Basic operation: the operation that contributes the most towards the running time of the algorithm T(n) ≈ c op C(n) running time execution time for basic operation or cost Number of times basic operation is executed input size Note: Different basic operations may cost differently!

15. Why Input Classes are Important? Input determines what the path of execution through an algorithm will be. If we are interested in finding the largest value in a list of N numbers, we can use the following algorithm:

16. Why Input Classes are Important? If the list is in decreasing order, There will only be one assignment done before the loop starts. If the list is in increasing order, There will be N assignments (one before the loop starts and N -1 inside the loop). Our analysis must consider more than one possible set of input, because if we only look at one set of input, it may be the set that is solved the fastest (or slowest). Our analysis must consider more than one possible set of input, because if we only look at one set of input, it may be the set that is solved the fastest (or slowest).

17. Input size and basic operation examples Problem Input size measure Basic operation Searching for key in a list of n items Number of list’s items, i.e. n Key comparison Multiplication of two matrices Matrix dimensions or total number of elements Multiplication of two numbers Checking primality of a given integer n n’size = number of digits (in binary representation) Division Typical graph problem #vertices and/or edges Visiting a vertex or traversing an edge

18. Importance of the analysis It gives an idea about how fast the algorithm If the number of basic operations C(n) = ½ n (n-1) = ½ n 2 – ½ n ≈ ½ n 2 How much longer if the algorithm doubles its input size? Increasing input size increases the complexity We tend to omit the constants because they have no effect with large inputs Everything is based on estimation T(n) ≈ c op C(n)

19. Empirical analysis of time efficiency Select a specific (typical) sample of inputs Use physical unit of time (e.g., milliseconds) or Count actual number of basic operation’s executions Analyze the empirical/experimental data

20. Cases to consider in Analysis Best-case, average-case, worst-case For some algorithms, efficiency depends on form of input: Worst case: C worst (n) – maximum over inputs of size n Best case: C best (n) – minimum over inputs of size n Average case: C avg (n) – “average” over inputs of size n The toughest to do

21. Best-case, average-case, worst-case Average case: C avg (n) – “average” over inputs of size n Determine the number of different groups into which all possible input sets can be divided. Determine the probability that the input will come from each of these groups. Determine how long the algorithm will run for each of these groups. n is the size of the input, m is the number of groups, pi is the probability that the input will be from group i, ti is the time that the algorithm takes for input from group i.

22. Example: Sequential search Worst case Best case Average case n key comparisons 1 comparison (n+1)/2, assuming K is in A

23. Computing the Average Case for the Sequential search Neither the Worst nor the Best case gives the yield to the actual performance of an algorithm with random input. The Average Case does Assume that: The probability of successful search is equal to p(0≤ p ≤1) The probability of the first match occurring in the ith position is the same for every i. The probability of a match occurs at i th position is p/n for every i In the case of unsuccessful search, the number of comparison is n with probability (1-p).

24. Computing the Average Case for the Sequential search If p =1 If p =1 (I found the key k) (n+1)/2 The average number of comparisons is (n+1)/2 If p=0 If p=0 n The average number of key comparisons is n The average Case is more difficult than the Best and Worst cases

25. 25 Mathematical Background

26. Logarithms

27. Which Base ? Log a n = Log a b Log b n Log a n = c Log b n In terms of complexity, we tend to ignore the constant

28. Mathematical Background

31. Types of formulas for basic operation’s count Exact formula e.g., C(n) = n(n-1)/2 Formula indicating order of growth with specific multiplicative constant e.g., C(n) ≈ 0.5 n 2 Formula indicating order of growth with unknown multiplicative constant e.g., C(n) ≈ cn 2

32. 32 Order of growth

33. Of greater concern is the rate of increase in operations for an algorithm to solve a problem as the size of the problem increases. This is referred to as the rate of growth of the algorithm.

34. Order of growth The function based on x 2 increases slowly at first, but as the problem size gets larger, it begins to grow at a rapid rate. The functions that are based on x both grow at a steady rate for the entire length of the graph. The function based on log x seems to not grow at all, but this is because it is actually growing at a very slow rate.

35. Values of some important functions as n  

36. Order of growth Second point to consider : Because the faster growing functions increase at such a significant rate, they quickly dominate the slower-growing functions. This means that if we determine that an algorithm’s complexity is a combination of two of these classes, we will frequently ignore all but the fastest growing of these terms. Example : if the complexity is we tend to ignore 30x term

37. Classification of Growth Asymptotic order of growth A way of comparing functions that ignores constant factors and small input sizes. O(g(n)): class of functions f(n) that grow no faster than g(n) All functions with smaller or the same order of growth as g(n) Ω(g(n)): class of functions f(n) that grow at least as fast as g(n) All functions that are larger or have the same order of growth as g(n) Θ(g(n)): class of functions f(n) that grow at same rate as g(n) Set of functions that have the same order of growth as g(n)

38. Big-oh O(g(n)): class of functions t(n) that grow no faster than g(n) if there exist some positive constant c and some nonnegative n0 such that You may come up with different c and n0

39. Big-omega Ω(g(n)): class of functions t(n) that grow at least as fast as g(n)

40. Big-theta Θ(g(n)): class of functions t(n) that grow at same rate as g(n)

41.  (g(n)), functions that grow at least as fast as g(n)  (g(n)), functions that grow at the same rate as g(n) O(g(n)), functions that grow no faster than g(n) g(n) >= <= = Summary

42. Theorem If t 1 (n)  O(g 1 (n)) and t 2 (n)  O(g 2 (n)), then t 1 (n) + t 2 (n)  O(max{g 1 (n), g 2 (n)}). The analogous assertions are true for the  -notation and  - notation. Implication: The algorithm’s overall efficiency will be determined by the part with a larger order of growth, i.e., its least efficient part. For example, 5n 2 + 3nlogn  O(n 2 ) Proof. There exist constants c1, c2, n1, n2 such that t1(n)  c1*g1(n), for all n  n1 t2(n)  c2*g2(n), for all n  n2 t2(n)  c2*g2(n), for all n  n2 Define c3 = c1 + c2 and n3 = max{n1,n2}. Then t1(n) + t2(n)  c3*max{g1(n), g2(n)}, for all n  n3 t1(n) + t2(n)  c3*max{g1(n), g2(n)}, for all n  n3

43. Some properties of asymptotic order of growth f(n)  O(f(n)) f(n)  O(g(n)) iff g(n)  (f(n)) If f (n)  O(g (n)) and g(n)  O(h(n)), then f(n)  O(h(n)) If f 1 (n)  O(g 1 (n)) and f 2 (n)  O(g 2 (n)), then f 1 (n) + f 2 (n)  O(max{g 1 (n), g 2 (n)}) Also,  1  i  n  (f(i)) =  (  1  i  n f(i))

44. Orders of growth of some important functions All logarithmic functions log a n belong to the same class  (log n) no matter what the logarithm’s base a > 1 is because All polynomials of the same degree k belong to the same class: a k n k + a k-1 n k-1 + … + a 0   (n k ) Exponential functions a n have different orders of growth for different a’s

45. Basic asymptotic efficiency classes 1constant log n logarithmic nlinear n log n n-log-n n2n2n2n2quadratic n3n3n3n3cubic 2n2n2n2nexponential n!n!n!n!factorial