Presentation is loading. Please wait.

Presentation is loading. Please wait.

TWO UMPIRE BASE MECHANICS.

Published byQuincy Jessup Modified over 9 years ago

Similar presentations

Presentation on theme: "TWO UMPIRE BASE MECHANICS."— Presentation transcript:

1 TWO UMPIRE BASE MECHANICS

2 FAST PITCH BASE MECHANICS

3 When the ball is hit, step into fair territory at an angle 90 degrees
No Runners On Hit to Infield FAST PITCH Base Umpire: When the ball is hit, step into fair territory at an angle 90 degrees to the path of throw but not more than 45 degrees from the foul line. Base Umpire: Stand upright in a relaxed position 18-21 feet beyond first base in foul territory. Take one or two steps with the pitch. Plate Umpire: Trail the batter-runner about 1/3 of the way to 1B staying close to the foul line, unless the play takes you elsewhere

4 When the ball is hit, step into fair territory at an angle 90 degrees
No Runners On Hit to Infield FAST PITCH Base Umpire: When the ball is hit, step into fair territory at an angle 90 degrees to the path of throw but not more than 45 degrees from the foul line. Base Umpire: Stand upright in a relaxed position 18-21 feet beyond first base in foul territory. Take one or two steps with the pitch. Plate Umpire: Trail the batter-runner about 1/3 of the way to 1B staying close to the foul line, unless the play takes you elsewhere

5 When the ball is hit, step into fair territory at an angle 90 degrees
No Runners On Hit to Infield FAST PITCH Base Umpire: When the ball is hit, step into fair territory at an angle 90 degrees to the path of throw but not more than 45 degrees from the foul line. Base Umpire: Stand upright in a relaxed position 18-21 feet beyond first base in foul territory. Take one or two steps with the pitch. Plate Umpire: Trail the batter-runner about 1/3 of the way to 1B staying close to the foul line, unless the play takes you elsewhere

6 No Runners On Double Base Umpire: Base Umpire:
FAST PITCH Base Umpire: Move inside the diamond 10-12’ from the line, button-hook and follow the runner Base Umpire: Stand upright in a relaxed position 18-21 feet beyond first base in foul territory. Take one or two steps with the pitch. Plate Umpire: Trail the batter-runner about 1/3 of the way to 1B staying close to the foul line unless the ball takes you elsewhere, then transition to the holding zone

7 No Runners On Double Base Umpire: Base Umpire:
FAST PITCH Base Umpire: Move inside the diamond 10-12’ from the line, button-hook and follow the runner Base Umpire: Stand upright in a relaxed position 18-21 feet beyond first base in foul territory. Take one or two steps with the pitch. Plate Umpire: Trail the batter-runner about 1/3 of the way to 1B staying close to the foul line unless the ball takes you elsewhere, then transition to the holding zone

8 No Runners On Double Base Umpire: Base Umpire:
FAST PITCH Base Umpire: Move inside the diamond 10-12’ from the line, button-hook and follow the runner Base Umpire: Stand upright in a relaxed position 18-21 feet beyond first base in foul territory. Take one or two steps with the pitch. Plate Umpire: Trail the batter-runner about 1/3 of the way to 1B staying close to the foul line unless the ball takes you elsewhere, then transition to the holding zone

9 side of F4, shade lead runner, square to plate, go to ready
Runners On 1B Base Hit FAST PITCH Base Umpire: Start behind and off the 1B side of F4, shade lead runner, square to plate, go to ready position at start of pitch Base Umpire: Button-hook 10-12’ inside the diamond, letting the ball take you to the play Plate Umpire: Trail the batter-runner, transition to holding zone, be prepared for a play on the lead runner at 3B and any play at the plate

10 side of F4, shade lead runner, square to plate, go to ready
Runners On 1B Base Hit FAST PITCH Base Umpire: Start behind and off the 1B side of F4, shade lead runner, square to plate, go to ready position at start of pitch Base Umpire: Button-hook 10-12’ inside the diamond, letting the ball take you to the play Plate Umpire: Trail the batter-runner, transition to holding zone, be prepared for a play on the lead runner at 3B and any play at the plate

11 side of F4, shade lead runner, square to plate, go to ready
Runners On 1B Base Hit FAST PITCH Base Umpire: Start behind and off the 1B side of F4, shade lead runner, square to plate, go to ready position at start of pitch Base Umpire: Button-hook 10-12’ inside the diamond, letting the ball take you to the play Plate Umpire: Trail the batter-runner, transition to holding zone, be prepared for a play on the lead runner at 3B and any play at the plate

12 side of F4, shade lead runner, square to plate, go to ready
Runners On 1B Double Play FAST PITCH Base Umpire: Start behind and off the 1B side of F4, shade lead runner, square to plate, go to ready position at start of pitch Base Umpire: When play goes to 2B, take 1 or 2 steps parallel toward 2B, push off right foot and make the call while moving parallel to baseline toward 1B without taking eyes off ball, allow the ball to turn your head Plate Umpire: Trail the batter-runner

13 side of F4, shade lead runner, square to plate, go to ready
Runners On 1B Double Play FAST PITCH Base Umpire: Start behind and off the 1B side of F4, shade lead runner, square to plate, go to ready position at start of pitch Base Umpire: When play goes to 2B, take 1 or 2 steps parallel toward 2B, push off right foot and make the call while moving parallel to baseline toward 1B without taking eyes off ball, allow the ball to turn your head Plate Umpire: Trail the batter-runner

14 side of F4, shade lead runner, square to plate, go to ready
Runners On 1B Double Play FAST PITCH Base Umpire: Start behind and off the 1B side of F4, shade lead runner, square to plate, go to ready position at start of pitch Base Umpire: When play goes to 2B, take 1 or 2 steps parallel toward 2B, push off right foot and make the call while moving parallel to baseline toward 1B without taking eyes off ball, allow the ball to turn your head Plate Umpire: Trail the batter-runner

15 side of F6, shade lead runner, square to plate, go to ready
Runners On 2B Hit to Infield FAST PITCH Base Umpire: Start behind and off the 2B side of F6, shade lead runner, square to plate, go to ready position at start of pitch Base Umpire: Read the play and get the best angle and distance possible Plate Umpire: Move to holding zone, be prepared for a play on a subsequent throw to 3B and any play at the plate

16 side of F6, shade lead runner, square to plate, go to ready
Runners On 2B Hit to Infield FAST PITCH Base Umpire: Start behind and off the 2B side of F6, shade lead runner, square to plate, go to ready position at start of pitch Base Umpire: Read the play and get the best angle and distance possible Plate Umpire: Move to holding zone, be prepared for a play on a subsequent throw to 3B and any play at the plate

17 side of F6, shade lead runner, square to plate, go to ready
Runners On 2B Hit to Infield FAST PITCH Base Umpire: Start behind and off the 2B side of F6, shade lead runner, square to plate, go to ready position at start of pitch Base Umpire: Read the play and get the best angle and distance possible Plate Umpire: Move to holding zone, be prepared for a play on a subsequent throw to 3B and any play at the plate

18 side of F6, shade lead runner, square to plate, go to ready
Runners On 1B & 2B Hit to Infield FAST PITCH Base Umpire: Start behind and off the 2B side of F6, shade lead runner, square to plate, go to ready position at start of pitch Base Umpire: Read the play and get the best angle and distance possible Plate Umpire: Move to holding zone, be prepared for a play on a subsequent throw to 3B and any play at the plate

19 side of F6, shade lead runner, square to plate, go to ready
Runners On 1B & 2B Hit to Infield FAST PITCH Base Umpire: Start behind and off the 2B side of F6, shade lead runner, square to plate, go to ready position at start of pitch Base Umpire: Read the play and get the best angle and distance possible Plate Umpire: Move to holding zone, be prepared for a play on a subsequent throw to 3B and any play at the plate

20 side of F6, shade lead runner, square to plate, go to ready
Runners On 1B & 2B Hit to Infield FAST PITCH Base Umpire: Start behind and off the 2B side of F6, shade lead runner, square to plate, go to ready position at start of pitch Base Umpire: Read the play and get the best angle and distance possible Plate Umpire: Move to holding zone, be prepared for a play on a subsequent throw to 3B and any play at the plate

21 side of F6, shade lead runner, square to plate, go to ready
Runners On 1B & 2B Hit to Infield FAST PITCH Base Umpire: Start behind and off the 2B side of F6, shade lead runner, square to plate, go to ready position at start of pitch Base Umpire: Read the play and get the best angle and distance possible Plate Umpire: Move to holding zone, be prepared for a play on a subsequent throw to 3B and any play at the plate

22 side of F6, shade lead runner, square to plate, go to ready
Bases Loaded Hit to Infield FAST PITCH Base Umpire: Start behind and off the 3B side of F6, shade lead runner, square to plate, go to ready position at start of pitch Base Umpire: Read the play and get the best angle and distance possible Plate Umpire: Move to holding zone, be prepared for a play on a subsequent throw to 3B and any play at the plate

23 side of F6, shade lead runner, square to plate, go to ready
Bases Loaded Hit to Infield FAST PITCH Base Umpire: Start behind and off the 3B side of F6, shade lead runner, square to plate, go to ready position at start of pitch Base Umpire: Read the play and get the best angle and distance possible Plate Umpire: Move to holding zone, be prepared for a play on a subsequent throw to 3B and any play at the plate

24 side of F6, shade lead runner, square to plate, go to ready
Bases Loaded Base Hit to Outfield FAST PITCH Base Umpire: Start behind and off the 3B side of F6, shade lead runner, square to plate, go to ready position at start of pitch Base Umpire: Button hook inside the diamond about ½ way between 1B & 2B, pick up the ball and glance at the runner Plate Umpire: Move to holding zone, be prepared for a play on a lead runner at 3B and any play at the plate

25 side of F6, shade lead runner, square to plate, go to ready
Bases Loaded Base Hit to Outfield FAST PITCH Base Umpire: Start behind and off the 3B side of F6, shade lead runner, square to plate, go to ready position at start of pitch Base Umpire: Button hook inside the diamond about ½ way between 1B & 2B, pick up the ball and glance at the runner Plate Umpire: Move to holding zone, be prepared for a play on a lead runner at 3B and any play at the plate

26 side of F6, shade lead runner, square to plate, go to ready
Bases Loaded Base Hit to Outfield FAST PITCH Base Umpire: Start behind and off the 3B side of F6, shade lead runner, square to plate, go to ready position at start of pitch Base Umpire: Button hook inside the diamond about ½ way between 1B & 2B, pick up the ball and glance at the runner Plate Umpire: Move to holding zone, be prepared for a play on a lead runner at 3B and any play at the plate

27

Download ppt "TWO UMPIRE BASE MECHANICS."

Similar presentations

Softball.

Softball.
WELCOME TO ASA UMPIRE TRAINING 1 AND 2 UMPIRE

WELCOME TO ASA UMPIRE TRAINING 1 AND 2 UMPIRE
Two Man Mechanics Legend Umpire Base Runner Batter Runner Batted Ball Thrown Ball Fielder Little League International® U1 U2 Two Umpire Crew Mechanics.

Two Man Mechanics Legend Umpire Base Runner Batter Runner Batted Ball Thrown Ball Fielder Little League International® U1 U2 Two Umpire Crew Mechanics.
3 MAN MECHANICS. GENERAL PRINCIPLES If you go out on a fly ball, STAY OUT; system reverts to 2 man; Check swings appeals go to U1 on right handed batter.

3 MAN MECHANICS. GENERAL PRINCIPLES If you go out on a fly ball, STAY OUT; system reverts to 2 man; Check swings appeals go to U1 on right handed batter.
HS Softball 2 Man Base Mechanics

HS Softball 2 Man Base Mechanics
MUTLTIPLE RUNNERS ON BASE

MUTLTIPLE RUNNERS ON BASE
1 4 MAN MECHANICS. 2 GENERAL PRINCIPLES In 4 man crew someone will ALWAYS go out on fly balls and once out stays out; Check swings appeals go to U1 on.

1 4 MAN MECHANICS. 2 GENERAL PRINCIPLES In 4 man crew someone will ALWAYS go out on fly balls and once out stays out; Check swings appeals go to U1 on.
Working the Line. Definition RULE 1-2 ART. 1... A diamond (or infield) shall be a 90-foot square. When measuring the distance to first base and third.

Working the Line. Definition RULE 1-2 ART A diamond (or infield) shall be a 90-foot square. When measuring the distance to first base and third.
Mechanic Session Adult ASA Click to start. Points of Emphasis Plate Umpire Responsibility Fair / Foul calls Catch / No-catch calls Strike / Balls Base.

Mechanic Session Adult ASA Click to start. Points of Emphasis Plate Umpire Responsibility Fair / Foul calls Catch / No-catch calls Strike / Balls Base.
2 MAN MECHANICS. F3 F4 F7 F8 F9 F5 F6 F1 F2 U1 P BR R1 R3 R2 Defense F1 – Pitcher F2 – Catcher F3 – 1 st Baseman F4 – 2 nd Baseman F5 – 3 rd Baseman F6.

2 MAN MECHANICS. F3 F4 F7 F8 F9 F5 F6 F1 F2 U1 P BR R1 R3 R2 Defense F1 – Pitcher F2 – Catcher F3 – 1 st Baseman F4 – 2 nd Baseman F5 – 3 rd Baseman F6.
Will Curtis F7 F9 F5 F2 F3 D – Slot To the right of Shortstop D – Slot To the right of Shortstop B – Slot to the left of the Second base B – Slot to.

Will Curtis F7 F9 F5 F2 F3 D – Slot To the right of Shortstop D – Slot To the right of Shortstop B – Slot to the left of the Second base B – Slot to.
Angles And Distance. WHAT IS A GOOD ANGLE? What is a good angle? Where you keep all four elements in front of you –Ball –Base –Offense –Defense.

Angles And Distance. WHAT IS A GOOD ANGLE? What is a good angle? Where you keep all four elements in front of you –Ball –Base –Offense –Defense.
No Runners On Hit to Infield Base Umpire: When the ball is hit, move parallel to the baseline toward 1B without taking your eyes off the ball to a position.

No Runners On Hit to Infield Base Umpire: When the ball is hit, move parallel to the baseline toward 1B without taking your eyes off the ball to a position.
Western Piedmont Baseball Mechanics 3 2-Man. Mechanics 3 2-Man: Field Mechanics & Coverages No Runners On Base UIC: Move out on all batted balls; Ground.

Western Piedmont Baseball Mechanics 3 2-Man. Mechanics 3 2-Man: Field Mechanics & Coverages No Runners On Base UIC: Move out on all batted balls; Ground.
Be ready you are likely to be asked to help me out ISF FIELD MECHANICS 3 AND 4 UMPIRE SYSTEM.

Be ready you are likely to be asked to help me out ISF FIELD MECHANICS 3 AND 4 UMPIRE SYSTEM.
1 UMPIRE MECHANICS. RESPONSIBILITIES OF A SINGLE UMPIRE (Rule 10, Section 4) If only one umpire is assigned, his duties and jurisdictions will extend.

1 UMPIRE MECHANICS. RESPONSIBILITIES OF A SINGLE UMPIRE (Rule 10, Section 4) If only one umpire is assigned, his duties and jurisdictions will extend.
Baseball Mechanic Tutorial This is a basic system, more detailed mechanics will be covered in the meetings. The following tutorial is for baseball 2 man.

Baseball Mechanic Tutorial This is a basic system, more detailed mechanics will be covered in the meetings. The following tutorial is for baseball 2 man.
Baseball Mechanic Tutorial The following situations are meant to serve as a guide based on the field mechanic class All situations assume a normal fielder.

Baseball Mechanic Tutorial The following situations are meant to serve as a guide based on the field mechanic class All situations assume a normal fielder.
ASA PLATE MECHANICS. STANCE Proper step in technique Proper step in technique Step in with foot closest to catcher 1 st. Step in with foot closest to.

ASA PLATE MECHANICS. STANCE Proper step in technique Proper step in technique Step in with foot closest to catcher 1 st. Step in with foot closest to.
Legend Umpire Base Runner Batter Runner Batted Ball Thrown Ball Fielder Little League International® U1 Little League ® Baseball and Softball Two Umpire.

Legend Umpire Base Runner Batter Runner Batted Ball Thrown Ball Fielder Little League International® U1 Little League ® Baseball and Softball Two Umpire.

Similar presentations

Ads by Google