1. STM32F10x Changes v1.5 to 1.4 HD added Changes v1.4 to 1.3
Updated timing of Agenda in slide 4-6(Day1-3)
Changes from V1.2 to V1.3
Changed page with rules, internal removed, some small letter size changes

2. Training objectives Value the STM32F10x family
Get understanding on CORTEX-M3 Core
Get familiar with STM32F10x peripherals and features
Introduce and practice with the STM32F10x Firmware Library

3. Chapter 1 - Session Start – Welcome + Introduction
- STM32 Marketing presentation
- Cortex-M3 Core – part 1
Cortex-M3 Core – part 2
Code Size, Performance and SW Migration
STM32F10x Block Diagram & Architecture
Tool-chains, Board & Library overview
In green for Geoff

4. Chapter 2 - STM32F10x System Blocks - Direct Memory Access (DMA)
- Power & Backup Blocks
- Reset & Clocks
- Low Power Modes
- STM32F10x Standard Peripherals
- RTC - Lab6
- Watchdogs
- GPIO & AFIO - Lab 4
- Analog to Digital Converter (ADC)
In green for Geoff

5. Chapter 3 - STM32F10x Standard Peripherals
- Advanced Control and General Timers (TIMx)
- STM32F10x Communication Peripherals
- SPI, I2S / I2C / USART / USB / CAN
- STM32F10x flash high density (up to 512k) peripherals
- FSMC, DAC
- SDIO, I2S
- FSMC Lab
In green for Geoff