Presentation is loading. Please wait.

Presentation is loading. Please wait.

Z x 725 Sensor Mark 140 x 140 17800 59800 Sensor Coordinates Bump Bond Pad Ø = 12/18 145 2595 FE PAD#2 110 x 210 LM Structure FE Chip Coordinates Bump.

Published byKaiya Arrendale Modified over 9 years ago

Similar presentations

Presentation on theme: "Z x 725 Sensor Mark 140 x 140 17800 59800 Sensor Coordinates Bump Bond Pad Ø = 12/18 145 2595 FE PAD#2 110 x 210 LM Structure FE Chip Coordinates Bump."— Presentation transcript:

1 z x 725 Sensor Mark 140 x 140 17800 59800 Sensor Coordinates Bump Bond Pad Ø = 12/18 145 2595 FE PAD#2 110 x 210 LM Structure FE Chip Coordinates Bump Bond Pad Row#0, Col#0 Ø = 18 275 FE Chip#8 Col#0 FE Chip#F Col 17 Seen from Top

2 z x M1 FE PAD#2 110 x 210 LM Structure Sensor FE Chip#8FE Chip#F M2 M3M4 W8WF M3-W8-Z M4-WF-Z M3-WF-Z M3-W8-X M2-W8-X M3-WF-Z Seen from Top

3 Wire Bond to Sensor Mark In the table on the right there are the distances from each of the 4 sensor mark to the first wire-bond pad of the 8 FE chips opposite to the barrel pigtail. The FE chips are: FE#8,…, FE#F. The reference system is the one used in the stave.

4 PITCH M2A M1AM0M1CM2C z Definition of module pitch in Z Sensor Marks

Download ppt "Z x 725 Sensor Mark 140 x 140 17800 59800 Sensor Coordinates Bump Bond Pad Ø = 12/18 145 2595 FE PAD#2 110 x 210 LM Structure FE Chip Coordinates Bump."

Similar presentations

Module design for B-layer replacement V.1. Bare Module dimensions 16.200mm Active area 17.000mm 16.210mm Footprint 18.500mm stack 200um chip 20um bumps.

Module design for B-layer replacement V.1. Bare Module dimensions mm Active area mm mm Footprint mm stack 200um chip 20um bumps.
The ATLAS Pixel Detector

The ATLAS Pixel Detector
2x2 module & stave layouts. 2 options “Small chip” “Big chip” Boundary between “small” and “big” is determined by the 6” sensor wafer layout that must.

2x2 module & stave layouts. 2 options “Small chip” “Big chip” Boundary between “small” and “big” is determined by the 6” sensor wafer layout that must.
$100 $200 $300 $400 $500 $100 $200 $300 $400 $500 $100 $200 $300 $400 $500 $100 $200 $300 $400 $500 $100 $200 $300 $400 $500 $100 $200 $300.

$100 $200 $300 $400 $500 $100 $200 $300 $400 $500 $100 $200 $300 $400 $500 $100 $200 $300 $400 $500 $100 $200 $300 $400 $500 $100 $200 $300.
ATLAS Module building at Glasgow

ATLAS Module building at Glasgow
Naming Convention HFT PIXEL 12-June-2009. pixel identification sector – ladder – chip - row - column 1-10in out1 out2 out3 1-101-640 12341234 Alternative.

Naming Convention HFT PIXEL 12-June pixel identification sector – ladder – chip - row - column 1-10in out1 out2 out Alternative.
General needs at CERN for special PCB’s Philippe Farthouat CERN.

General needs at CERN for special PCB’s Philippe Farthouat CERN.
1 Module and stave interconnect Rev. sept. 29/08.

1 Module and stave interconnect Rev. sept. 29/08.
1 times table 2 times table 3 times table 4 times table 5 times table

1 times table 2 times table 3 times table 4 times table 5 times table
Ladder QA Status. Ladder QA Summary Ladder8765432187654321Remarks 1XXXXXXXXOOOOOXOO left : short (via-GND) right chip3 : cannot mask 2OOOOOOOOOOOOOOO.

Ladder QA Status. Ladder QA Summary Ladder Remarks 1XXXXXXXXOOOOOXOO left : short (via-GND) right chip3 : cannot mask 2OOOOOOOOOOOOOOO.
20th RD50 Workshop (Bari)1 G. PellegriniInstituto de Microelectrónica de Barcelona G. Pellegrini, C. Fleta, M. Lozano, D. Quirion, Ivan Vila, F. Muñoz.

20th RD50 Workshop (Bari)1 G. PellegriniInstituto de Microelectrónica de Barcelona G. Pellegrini, C. Fleta, M. Lozano, D. Quirion, Ivan Vila, F. Muñoz.
Naming Convention HFT PIXEL 12-June-2009 Updated 03/08/2013 By LG to include row and column information for Ultimate sensors.

Naming Convention HFT PIXEL 12-June-2009 Updated 03/08/2013 By LG to include row and column information for Ultimate sensors.
Plans for Demonstrator Flip Chip Bonding GTK meeting 9/12/08 1.

Plans for Demonstrator Flip Chip Bonding GTK meeting 9/12/08 1.
Drift Chambers Drift Chambers are MWPCs where the time it takes for the ions to reach the sense wire is recorded. This time info gives position info:

Drift Chambers Drift Chambers are MWPCs where the time it takes for the ions to reach the sense wire is recorded. This time info gives position info:
$100 $200 $300 $400 $500 $100 $200 $300 $400 $500 $100 $200 $300 $400 $500 $100 $200 $300 $400 $500 $100 $200 $300 $400 $500 $100 $200 $300.

$100 $200 $300 $400 $500 $100 $200 $300 $400 $500 $100 $200 $300 $400 $500 $100 $200 $300 $400 $500 $100 $200 $300 $400 $500 $100 $200 $300.
January, 2007Vaclav Vrba, Prague FVTX Strip Sensor Design General features:  Strip pitch = 75 µm  # chip channels = 128;  chip width = 128 x 75 µm =

January, 2007Vaclav Vrba, Prague FVTX Strip Sensor Design General features:  Strip pitch = 75 µm  # chip channels = 128;  chip width = 128 x 75 µm =
M.Oriunno, SLAC Stave cable and module options. M.Oriunno, SLAC Background - module The IBL electrical unit for data output is a single chip The use of.

M.Oriunno, SLAC Stave cable and module options. M.Oriunno, SLAC Background - module The IBL electrical unit for data output is a single chip The use of.
— Test board for CBM01B2 baby detectors — Anton Lymanets & Johann Heuser CBM collaboration meeting GSI, 27 February 2008 Microstrip detector testing at.

— Test board for CBM01B2 baby detectors — Anton Lymanets & Johann Heuser CBM collaboration meeting GSI, 27 February 2008 Microstrip detector testing at.
Foundry Characteristics

Foundry Characteristics
2 Silicon pixel part Done and to be written Written! Under way To be done Introduction 1.Hybrid Pixel Assembly Concept 2.Silicon sensor 1.First thinned.

2 Silicon pixel part Done and to be written Written! Under way To be done Introduction 1.Hybrid Pixel Assembly Concept 2.Silicon sensor 1.First thinned.

Similar presentations

Ads by Google