1. KX-NS8188 E1 Adapter KX-NS8290 PRI Adapter Product Information
NS1000 Version 2 Document for SE and Sales Training
KX-NS8188 E1 Adapter KX-NS8290 PRI Adapter Product Information
Rev 1.1E January 09, 2013
Panasonic System Networks PBX SE team
Specifications and schedule are subject to change without notice.

2. 1. Introduction
When customers want to use IP-Phone (*) mainly for extension and they want to use E1 or more than 2 PRI as trunk, KX-NS1000 version 2 with new trunk adapter is recommended because KX-NS1000 supports more IP capacity and IP functionality than KX-NCP or KX-TDE. (*) - KX-NT / KX-UT by Panasonic - NT based software phone by Panasonic - SIP hardware phone by other maker - SIP software phone for PC, Android, iPhone and so on
Panasonic KX-NS8290
PRI30
Trunk Adaptor
SIP Extension
PRI30
Model
Specifications
KX-NS8188X
E1 adapter on SIP trunk
KX-NS8290CE
PRI30 adapter on SIP trunk
KX-NS8290X
PRI23 adapter on SIP trunk
SIP Trunk (30-ch)
KX-NS1000
PRI Card
IP Network
KX-NCS0290
215 mm (W) 44 mm (H) 200 mm (D)
500g
KX-NT
KX-UT
Other SIP Phone
SIP Softphone 2

3. 2. Introduction
Stacking Card
On the other hand, when customer has Panasonic PBX now, they can add IP capacity and IP functionality using KX-NS1000 version 2 with stacking card KX-NS0130 with keeping current PBX. This configuration is useful for new customer also when they need more SLT phone, Digital PT with DSS Console, Analog PT and analog CO as well as IP-Phone.
KX-NS0130
SC card for NS100
KX-NS0131
SC card for NCP
KX-NS0132
SC card for TDA/TDE
Before adding KX-NS1000
After adding KX-NS1000
Analog CO
Analog CO
Direct Connection like TDE600 to TDE620
KX-TDE
KX-TDE
KX-NS1000
CO Card
CO Card
MPR Card
SC Card
SC Card
EXT Card
EXT Card
KX-NCS0130
100 % Feature Transparency like TDE600 to TDE620
IP Network
SLT
KX-DT w/ DSS Console
KX-NT
KX-UT
Other SIP Phone
SIP Softphone
SLT
KX-DT w/ DSS Console 3

4. 3. Table of Contents Chapter Explanation 1 Overview 2 Specifications 3
Concept of programming for Public mode 4
Step by step programming for the trunk adapter 5
Step by step programming for KX-NS1000 6
Programming hint for Private mode (QSIG) 7
Demonstration guide 4

5. Chapter 1 Overview

6. 11. Trunk Adapter for E1 / PRI
Panasonic KX-NS8290 increases PRI capacity. KX-NS8188 for E1.
One PRI by card
Two PRI by card and adapter
Panasonic KX-NS8290
PRI30
Trunk Adaptor
SIP Extension
PRI30
PRI30
SIP Trunk (30-ch)
KX-NS1000
KX-NS1000
PRI Card
IP Trunk AK
PRI Card
KX-NCS0290
IP Network
IP Network
KX-NCS0290
KX-NT
KX-UT
Other SIP Phone
SIP Softphone
KX-NT
KX-UT
Other SIP Phone
SIP Softphone
Activation key of IP Trunk is NOT required in KX-NS1000 to connect PRI / E1 trunk adapter, even if SIP Trunk of KX-NS1000 is used.

7. 12. Trunk Adapter for E1 / PRI - Capacity
Maximum 256 ch is available for E1 / PRI by adapter and IP trunk.
Line
NS1000 x 1
NS1000 x 2
NS1000 x 3
NS1000 x 4 or more
Trunk
256
256 x 2
600
Legacy
IP incl E1/PRI adapter
SIP
H.323 48
48 x 2 = 96
Also useful to provide PRI/E1 with 2-ch Analog CO or 4 BRI.
PRI30 E1
PRI30 E1
SIP Provider
Trunk Adaptor
Trunk Adaptor
PRI30 E1
SIP Trunk (xx-ch)
SIP Trunk (30-ch)
SIP Trunk (30-ch)
PRI30
256ch
Trunk Adaptor
Analog CO
SIP Trunk (30-ch)
PRI Card
CO Card
Max. 256ch can be registered to SIP provider or the adapter.

8. Stacking card is not required in this case.
13. TDE as Option by H.323
Reference
KX-TDE with CO card increases CO capacity using H.323.
More Analog CO by TDE (H.323)
Analog CO
Enhanced QSIG AK
Enhanced Feature AK
KX-TDE
IP Trunk AK
CO Card
H.323
IP Trunk AK
MPR Card w/ VoIP DSP
IP Network
Stacking card is not required in this case.
SC Card
KX-NT
KX-UT
Other SIP Phone
SIP Softphone
Activation key of IP Trunk is required in KX-NS1000 for H.323 all channels and required in KX-TDE for more than 4 or 16 channels. Activation key for “Enhanced QSIG” is not required because this configuration needs only basic QSIG function.

9. 14. TDE as Option by H.323 - Capacity
Reference
Maximum 96 ch is available for Analog CO / BRI and H.323.
Line
NS1000 x 1
NS1000 x 2
NS1000 x 3
NS1000 x 4 or more
Trunk
256
256 x 2
600
Legacy
IP incl E1/PRI adapter
SIP
H.323 incl Analog CO by TDE 48
48 x 2 = 96
Branch HQ
PRI30
Analog CO
Trunk Adaptor
Analog CO
KX-TDE
H SIP Trunk (256 ch)
H.323 (32 ch)
KX-NS1000
KX-NCP
CO Card
CO Card
H.323 (96 ch)
IP Network
MPR Card w/ VoIP DSP
H.323 (32 ch)
CO Card
Max. 96ch can be used for any other PBX. (Chanel is occupied only when call is made. )

10. 15. Stacking Card Stacking Card increases DPT + SLT + Trunk capacity.
100 % Feature Transparency like TDE600 to TDE620
More Analog CO and DPT / SLT by Stacking Card
Analog CO
Direct Connection like TDE600 to TDE620
KX-TDE
KX-NS1000
CO Card
SC Card
SC Card
EXT Card
IP Network
SLT
KX-DT
KX-NT
KX-UT
Other SIP Phone
SIP Softphone
This configuration is useful if customer needs DPT with DSS Console and so on. - SC card for TDE-NCP is installed instead of MPR card. - SC card for NS1000 is installed to free slot. (Slot for “PRI+2SLT” etc )

11. 16-1. Stacking Card - Specifications
Specifications You can connect a maximum of 2 existing PBXs for one KX-NS1000. A maximum of 8 existing PBXs and 16 KX-NS1000 can be connected for the entire One-look Network. An existing PBX refers to a Panasonic KX-TDE series, KX-NCP series, or KX-TDA100/200/600/620 PBX.
IP Network
KX-TDE620
SC Card
SC Card
KX-TDE600
KX-TDE620
KX-TDE600
KX-NCP
IP Network
SC Card
SC Card
KX-NCP
SC Card
QSIG
Max. 8 PBXs
KX-DT
KX-DT
KX-DT
KX-DT
KX-DT
KX-DT
Different PBX category cannot be mixed to one KX-NS Category 1 : KX-NCP Category 2 : KX-TDE(A) Category 3 : KX-TDE(A) Stacking card for KX-TDA100D is not planned currently.
NCP500+TDE200 : N/A TDE100+TDA200 : OK TDE600+TDE620 : OK TDE620+TDE620 : OK

12. 16-2. Stacking Card - Conditions
Conditions - Cards in right table are not supported. Reason is as follows MPR is not required IP feature is supported by KX-NS DISA/SVM feature is supported by KX-NS without AK New cards for TDE-NCP version 5 are N/A. - By above condition, KX-NT400 and KX-HGT100 cannot be used after connecting with KX-NS IP capacity AK is not required for trunk and extension in existing PBXs because these are not IP. - Other AK such as CA is required in KX-NS1000 for extension in existing PBX. - In case of TDA100/200 and TDE100/200 OPB3 card with ECHO16 must be installed in only Slot 1. *) Other cards except OPB3 or OPB3 card with other daughter board except ECHO16 can be installed to any slot.
Not Supported
Symbol
Model
RMT
TDA0196
MEC
TDA0105/
TDE0105
DSP4
NCP1104
DSP16
TDE0110
DSP64
TDE0111
CTI-LINK
TDA0410
IP-EXT16
TDA0470
IP-GW4E
TDA0484
IP-GW16
TDA0490
IP GW4
TDA0480
MSG4
TDA0191
ESVM2
TDA0192
ESVM4
TDA0194
CLCOT8
TDA1180
CLCOT8E
TDA1186
MCSLC24
TDA1178
MCSLC16
TDA1176

13. 17. Stacking Card - Programming
Programming It is not required to program for connection (Same as TDE600 to TDE620 connection). Property of cards in TDE/NCP can be programmed using NS1000 Web.

14. 18. Recommendation of Configuration
KX-NS1000 is recommended as follows, when new customer does not have Panasonic PBX now and they want to use IP phone mainly for extension.
When customer wants to use
Recommendation
for Extension
for Trunk
One PRI or 4 BRI
Optional Card
E1 / 2 or more PRI
E1 / PRI + 4 BRI
Trunk Adapter (+ Optional Card)
IP Phone + 2 SLT
E1 / PRI + 2 Analog
3 or more Analog CO
TDE/NCP as option by H.323
5 or more BRI
Other mixture
IP Phone + Digital PT + Analog PT + SLT
(Any above configuration)
TDE620 with Stacking Card
Version 1 & 2
Version 2
Version 1 & 2
Version 2 14

15. 19. KX-NS1000 Capacity Total capacity is as follows.
Line
NS1000 x 1
NS1000 x 2
NS1000 x 3
NS1000 x 4 or more
Trunk
256
256 x 2
600
Legacy by stacking card or/and “xxx+SLT2” card
IP incl E1/PRI adapter
SIP
H.323 48
48 x 2 = 96
Extension
640
1000
Digital PT / Analog PT / SLT by stacking card or/and “xxx+SLT2” card
480 SLT (*1) 512 DPT (*2) IP UT
NT (NS1000 V1)
128
128 x 2
128 x 3
128 x N or 1000
NT (NS1000 V2)
256 x 3
(*1) 24SLT x 10 by TDE620 x 2 for example (*2) 256 DPT incl DXDP by TDE620 x 2 for example 15

16. Chapter 2 Specifications

17. 21. Hardware Appearance Hardware Appearance is as follows. No.
Front
No.
Description 1
System LED 2
E1 / PRI line LED 3
DC Jack 4
LAN Port 5
LAN LED (Link) 6
LAN LED (Transmission Speed) 7
E1 / PRI line port 8
Initialize button (Not slide switch)
Back
Wall Mountain
Unpack the box and check the items below: Main Unit x 1 Screw x 2 Washer x 2

18. 22. PoE (Power over Ethernet)
KX-NS8188 / KX-NS8290 supports PoE. If PoE is not supported by network, AC adapter is required KX-A420 for Brazil KX-A239 for others *) These are same model of AC adapter for KX-UT phone.

19. 23. KX-NS8188 E1 Adapter
KX-NS8188 E1 adapter supports following features.
Features
NS8188
TDA0188 (Reference)
Signaling
DR2
Yes
E&M-C No
E&M-P
Dial Type
MFC-R2
DTMF
Pulse
Caller Number Notification (ANI)
Charge / Meter Pulse
Deny collect call for Brazil
Outgoing call auto disconnect E1
KX-NS8188
Trunk Adaptor
KX-TDA0188
KX-TDE
KX-NS1000

20. 24. KX-NS8290 PRI Adapter
KX-NS8290 PRI adapter supports following features.
Features
NS8290
NS0290 (Reference)
Mode
CO (Public)
Yes
Extension No
QSIG-master/slave (Private)
ISDN Carrier Service (Public)
CLIP / CLIR
COLP / COLR
CNIP /CNIR
CONP / CONR
Advice of charge
Call Forwarding
Call Hold
Call Transfer (incl. ISDN Centrex)
Tree-party conference
Malicious call identification
Generic keypad protocol
CCBS
ISDN - Virtual Private Network
E-911 (for PRI23)
“No” because these services by ISDN provider are not popular and PBX can support same feature basically.
Conf by PBX
Conf by ISDN
ISDN
KX-NS8290
Trunk Adaptor
KX-NS0290
PRI Card
KX-NS1000

21. Private Network (Leased ISDN)
25. KX-NS8290 PRI Adapter for QSIG
KX-NS8290 PRI adapter supports QSIG also.
NS1000 or other PBX
Features
NS8290
TDA0290 (Reference)
QSIG service
CLIP/CLIR
Yes
CNIP/CNIR
Call Forwarding (CF)
Call Transfer (CT)
Completion of Calls to Busy Subscriber (CCBS)
Network Direct Station Selection (NDSS)
Centralized Voice Mail
Network ICD Group
PRI QSIG
Private Network (Leased ISDN)
PRI QSIG
Trunk Adaptor
H.323 QSIG
30ch or 23ch
IP Trunk AK
H.323 is used for this configuration instead of SIP.
KX-NS1000
Line
NS1000 x 1
NS1000 x 2
NS1000 x 3
NS1000 x 4 or more
IP incl E1/PRI adapter
256
SIP + PRI Adapter for Public
H PRI Adapter for QSIG 48
48 x 2 = 96

22. 26. Fractional Service
Fractional service is also available. <Stand alone>
20ch E1/PRI
Trunk Adaptor
20ch
KX-NS1000
<One-look network>
20ch E1/PRI
60ch E1/PRI
10ch E1/PRI
Trunk Adaptor
Trunk Adaptor
Trunk Adaptor
Trunk Adaptor
Total 256ch
20ch
30ch
30ch
10ch
1st KX-NS1000 in Fukuoka
2nd KX-NS1000 in Tokyo
16th KX-NS1000 in Niseko

23. 27. Solution with “Back-up Master”
Back-up is available automatically for SIP trunk incl E1 / PRI adapter, KX-NT/UT IP-phone and one look connection.
PRI/E1 or SIP Provider
Back-up master PBX works as slave PBX usually. But it works as master PBX after master PBX stops working.
Trunk Adaptor
KX-NS1000 (2nd) Back-up Master
SIP Trunk
One-Look AK
One-Look AK
KX-NS1000 (1st) Master
KX-NT
KX-UT
KX-NT
KX-UT
PRI/E1 or SIP Provider
Trunk Adaptor
After master PBX stops working,
KX-NS1000 Back-up Master
SIP Trunk
One-Look AK
One-Look AK
KX-NS1000 Master
KX-NT
KX-UT
KX-NT
KX-UT

24. Chapter 3 Concept of Programming for Public Connection

25. 31. Concept of Programming - Adapter
The trunk adapter is PBX with E1 / PRI trunk and SIP extension. SIP trunk of KX-NS1000 is registered to SIP extension of the adapter. <Programming for the trunk adapter> Software of the adapter is basically same as KX-NS1000. Features except E1 / PRI and SIP extension are removed. Therefore programming method is very similar to KX-NS1000.
E1/ ISDN
- PRI configuration is same as programming for KX-NS1000 PRI card (KX-NS0290). E1 configuration is same as KX-TDE E1 card (KX-TDA0188) SIP extension configuration is same as KX-NS But SIP extension is programmed by default to 430 for E1 / PRI to 423 for PRI23
PRI
E1 / PRI
Trunk Adaptor
SIP Extension
30ch or 23ch
ID SIP Trunk
KX-TDA0188
PRI Card
KX-TDE
KX-NS1000
KX-NS0290 25

26. 32. Concept of Programming – NS1000
<Programming for KX-NS1000> The trunk adapter is basically SIP provider for KX-NS1000. Following has to be programmed. - IP address of the adapter as SIP server destination - SIP registration User ID (Password is not required.) - Connection Attribute : SIP Provider / Trunk Adapter
E1/ ISDN
E1 / PRI
Trunk Adaptor
SIP Extension
30ch or 23ch
ID SIP Trunk
KX-NS1000 26

27. 33. Concept of Programming - Call
<Programming for KX-NS CONT> Programming of the trunk adapter is not required for DDI / DIL incoming call from E1/PRI to SIP extension. It works like DIL 1:1 without programming and DDI number and caller ID are informed from the trunk adapter to KX-NS Programming of KX-NS1000 is required for DDI / DIL. Outgoing call is also programmed for KX-NS1000 instead of the trunk adapter. Therefore administrator has to access only KX-NS1000 to change extension number, DDI and so on after dealer installed.
E1 / ISDN
E1 / PRI
CH CH CH30
Trunk Adapter
DDI Caller ID
SIP Extension
SIP Trunk
KX-NS1000 27

28. Chapter 4 Step by Step Programming for Trunk Adapter
Trunk Adaptor
KX-NS1000

29. 41. Initialize
Operation and “SYSTEM” LED display is as follows. 1. Power On (Connect AC adapter or connect LAN with PoE) (a) Amber On (5 sec) (b) Amber rapid flash (5 sec) 2. During (b), keep pressing Initialize button for 1s. (c) Off (2 sec) (d) Amber On (30 sec) (e) Amber slow flash (120 sec) (f) Green slow flash - Display of (b) finishes before 5 sec after operation of (2). - Display of (f) means success of initialization and awaiting “Easy set-up” of web maintenance console.
Trunk Adaptor
KX-NS1000
System LED
Initialize Button 29

30. 42. LED Indication LED indication is as follows. KX-NS1000 30
Trunk Adaptor
KX-NS1000 30

31. 43. PC Connection - 1
(1) Set IP address for example to your PC like first connection of KX-TDE or KX-NCP Trunk adapter does not have maintenance port with DHCP server Sub-net mask should be (2) Connect by Firefox Default IP address of trunk adapter is
Trunk Adaptor
KX-NS1000
KX-NS1000
DHCP Server
by default
Trunk Adapter
For demo, NS1000 with DHCP server function is useful to assign IP address of PC automatically.
for example
by default 31

32. 43. PC Connection - 2
(1) In 10 seconds from step in previous page, log-in menu is displayed. (2) Input “INSTALLER” as user and “1234” as password.
Trunk Adaptor
KX-NS1000 32

33. 44. Easy setup - Language selection
(1) Select language.
Trunk Adaptor
KX-NS1000 33

34. 44. Easy setup - 1 (1) Select Suffix of KX-NS1000 and area.
Trunk Adaptor
KX-NS1000
No need to change
If Suffix is changed, system restarts again after click [OK]. Wait 3 min and connect PC again.
(a) Amber slow flash (30 sec) (b) Amber On (10 sec) (c) Amber rapid flash (5 sec) (d) Amber On (30 sec) (e) Amber slow flash (120 sec) (f) Green slow flash 34

35. 44. Easy setup - 2
No need to change. - Adapter name is only for reference. - Time is used only for error log.
Trunk Adaptor
KX-NS1000 35

36. 44. Easy setup - 3
(1) Input IP address of trunk adapter in actual customer’s network. Get the IP address from IT manager. *) For demo, default is OK.
Trunk Adaptor
KX-NS1000 36

37. 44. Easy setup - 4
No need to change. - Time is used only for error log.
Trunk Adaptor
KX-NS1000 37

38. 44. Easy setup - 5
(1) Input password as you hope, click [Finish]. (2) Wait for 30 seconds.
Trunk Adaptor
KX-NS1000
If LAN setting is changed, system restarts again after click [OK]. Wait 3 min and connect PC again.
(a) Amber slow flash (30 sec) (b) Amber On (10 sec) (c) Amber rapid flash (5 sec) (d) Amber On (30 sec) (e) Amber slow flash (120 sec) (f) Green slow flash 38

39. 45. Maintenance Console - Top menu
If LAN setting is changed, (1) Remove the trunk adapter from LAN (2) Connect it to actual customer’s network. (3) Connect PC to IP address of trunk adapter using Firefox. (4) After log-in, following top menu is displayed. If LAN setting is not changed, following Top menu is displayed.
Trunk Adaptor
KX-NS1000 39

40. 45. Maintenance Console - 1
Software version can be confirmed as follows.
Trunk Adaptor
KX-NS1000 40

41. 45. Maintenance Console - 2
Parameter for PRI can be modified as follows. (Same as “PRI + 2 SLT” card)
Trunk Adaptor
KX-NS1000 41

42. 45. Maintenance Console - 3
IP address of adapter can be changed. (No need to change usually.)
Trunk Adaptor
KX-NS1000 42

43. 45. Maintenance Console - 4
Software can be updated by one step. (Not same as KX-NS1000) - Wait 15 minutes after clicking [Execute]. (Same as KX-NS1000.)
Trunk Adaptor
KX-NS1000 43

44. 45. Maintenance Console - 5 E1/ PRI Card diagnosis is supported.
Trunk Adaptor
KX-NS1000
Out of service can be assigned. This is required for software update also. 44

45. Chapter 5 Step by Step Programming for KX-NS1000

46. 51. KX-NS Out of Service
Install virtual SIP trunk card. Out of service is required for port or card before programming in following pages.
Trunk Adaptor
Trunk Adaptor
KX-NS1000 46

47. 52. KX-NS1000 - Connection Attribute
Change connection attribute from “SIP provider” to “Trunk Adapter” for each channels or click [Trunk Adapter] button to change max. 30 ch at the same time.
Trunk Adaptor
Trunk Adaptor
Use this No need to program each ch.
KX-NS1000 47

48. 53. KX-NS1000 - Trunk Adapter button - 1
Input IP address of trunk adapter and click [Next]. - Trunk adapter name is for reference.
Trunk Adaptor
Trunk Adaptor
KX-NS1000
Web maintenance console for the trunk adapter is opened.
For reference
Max. 16 Adapter *) If program manually not using “trunk adapter”, more than 16 adapter can be programmed. 48

49. 54. KX-NS1000 - Trunk Adapter button - 2
Select range to connect the trunk adapter instead of SIP provider. Select IP address and click [Finish]. If fractional service is used, set “20” for example. Otherwise NS1000 tries making call using 21ch to 30ch of PRI.
SIP Provider
Trunk Adaptor
Trunk Adaptor
KX-NS1000 49

50. 55. KX-NS1000 - Registration to SIP Server
Connection attribute were programmed by previous step. Parameters for registration to SIP server (E1/PRI adapter) were also programmed.
Trunk Adaptor
Trunk Adaptor
KX-NS1000 50

51. 56. KX-NS CLIP
“PBX CLIP” has to be selected as follows to send CLIP on extension for outgoing call.
Trunk Adaptor
Trunk Adaptor
KX-NS1000 51

52. 57. KX-NS In Service
Set In Service. - Other programming such as ARS, TRS is basically same as PRI for KX-TDE/NCP. - However it is required to program as next 2 pages additionally because I/F with trunk adapter is SIP.
E1 / ISDN
Trunk Adaptor
KX-NS1000
When E1/PRI line of trunk adapter is fault, trunk adapter stops communication with KX-NS1000. Therefore the SIP trunk ch of KX-NS1000 becomes fault. This specification is useful not to use the SIP ch automatically for ARS and so on. 52

53. 58. KX-NS Dialing Plan
Dialing plan has to be programmed for outgoing call because I/F with trunk adapter is SIP en-block dial. Otherwise extension caller has to wait for 10 seconds to hear ring back tone after dial to E1/PRI trunk adapter.
Trunk Adaptor
Trunk Adaptor
KX-NS1000 53

54. 59. KX-NS1000 - DDI Modification
DDI first 3 digits has to be removed because I/F with trunk adapter is SIP. ID such as “401” + real DDI number is informed as DDI number from E1/PRI adapter to KX-NS1000.
E1 / ISDN
Trunk Adaptor
DDI 5678
DDI
KX-NS1000
DDI 5678
Program DDI table. 54

55. Chapter 6 Programming Hint for Private Mode (QSIG)

56. 61. Easy Setup for Adapter
“Private” has to be selected by easy setup mode.
KX-NS1000
H.323
Ext 2xx
Trunk Adaptor
ISDN QSIG
Ext 1xx

57. 62. PRI QSIG mode for Adapter
QSIG (Slave) is assigned automatically after easy setup.
KX-NS1000
H.323
Ext 2xx
Trunk Adaptor
ISDN QSIG
Ext 1xx

58. 63. H.323 programming for Adapter
H.323 destination programming of adapter is also required. Common IP address is assigned for any dial. (Not each dial)
KX-NS1000
H.323
Ext 2xx
Trunk Adaptor
ISDN QSIG
Ext 1xx
IP address of Back-up master PBX

59. 64. H.323 programming for KX-NS1000
H.323 destination programming of KX-NS1000 is required for adapter as well as other PBXs. Sole difference is that activation key for IP trunk is not required.
KX-NS1000
H.323
Ext 2xx
Trunk Adaptor
ISDN QSIG
Ext 1xx
IP Network
Ext 3xx
DN2IP table (Dial to IP) Dial 2xx to Dial 3xx to Dial 4xx to
Ext 4xx

60. Chapter 7 Demonstration Guide

61. KX-TDE with 2 PRI Extension as ISDN provider
71. Configuration Example
KX-TDE with 2 PRI Extension as ISDN provider
DLC
PRI
PRI
Ext Ext 31X Ext 32X (for test)
PRI Adaptor
SIP Trunk (30-ch)
KX-NS1000
KX-NCP with PRI
PRI
Ext 101 CLIP
Ext 102 CLIP
Ext 201 CLIP 61

62. KX-TDE with 2 PRI Extension as ISDN provider
72. Outgoing Call
KX-TDE with 2 PRI Extension as ISDN provider
DLC
PRI
PRI
Dialing plan 3XX
Ext Ext 31X Ext 32X (for test)
DDI 321
Dial 321 (Remove by ARS)
Dial 321
PRI Adaptor
SIP Trunk (30-ch)
KX-NS1000
KX-NCP with PRI
PRI
DDI Program
Dial 0/
Ext 101 CLIP
Ext 102 CLIP
Ext 201 CLIP 62

63. KX-TDE with 2 PRI Extension as ISDN provider
73. Incoming Call
KX-TDE with 2 PRI Extension as ISDN provider
DLC
PRI
PRI
Ext Ext 31X Ext 32X (for test)
Dial 312 (Remove by ARS)
DDI 312
PRI Adaptor
DDI
SIP Trunk (30-ch)
KX-NS1000
KX-NCP with PRI
DDI Program
PRI
Dial 0/
Ext 101 CLIP
Ext 102 CLIP
Ext 201 CLIP 63

64. 74. PRI Extension
DLC
PRI
PRI
Standard LAN cable can be used by this switch for PRI Extension.
Ext Ext 31X Ext 32X (for test)
PRI Adaptor
PRI 64

65. 75. KX-NS1000 – SIP Register Resending
“Register Resending Interval” has to be 10 seconds. If default value 300 seconds is used, it takes for 0 to 300 seconds to reconnect KX-NS1000 and trunk adapter, when trunk adapter returns IN Service from Out of Service or LAN is reconnected.
Trunk Adaptor
Trunk Adaptor
KX-NS1000 65

66. Thank you ! The END