1. NS1000 Version 2 Document for SE and Sales Training
KX-NS1000 Version 2 Summary
Rev 1.2D January 10, 2013
Panasonic System Networks PBX SE team
Specifications and schedule are subject to change without notice.

2. Table of Contents No. Feature Improvement Document 1
E1/PRI adapter on SIP trunk of KX-NS1000
1. PRI E1 Adapter + 2. Stacking Card xxx.ppt 2
Stacking card for TDA/TDE/NCP connection 3
KX-NT phone capacity 128(V1) to 256(V2) per one NS1000
Page 6 in this PPT 4
Network survivability
4. Network Survivability xxx.ppt 5
KX-NT5xx phone support UT based hardware for improved hands-free NT based software for full PBX features
5. NT5xx_QRG.pdf 6
SBC for KX-UT Phone
(See Reference Folder) 7
KX-UDT UT based IP System DECT 8
Other Improvement
Click to link
Click to link
Click to link 2

3. Introduction

4. 1. E1 / PRI Adapter
When customers want to use IP-Phone (*) mainly for extension and they want to use E1 or more than 2 PRI as trunk, KX-NS1000 version 2 with new trunk adapter is recommended because KX-NS1000 supports more IP capacity and IP functionality than KX-NCP or KX-TDE. (*) - KX-NT / KX-UT by Panasonic - NT based software phone by Panasonic - SIP hardware phone by other maker - SIP software phone for PC, Android, iPhone and so on
Panasonic KX-NS8290
PRI30
Trunk Adaptor
SIP Extension
PRI30
Model
Specifications
KX-NS8188X
E1 adapter on SIP trunk
KX-NS8290CE
PRI30 adapter on SIP trunk
KX-NS8290X
PRI23 adapter on SIP trunk
SIP Trunk (30-ch)
KX-NS1000
PRI Card
IP Network
KX-NCS0290
215 mm (W) 44 mm (H) 200 mm (D)
500g
KX-NT
KX-UT
Other SIP Phone
SIP Softphone 4

5. 2. Stacking Card
Version 2.03 for TDA/TDE
On the other hand, when customer has Panasonic PBX now, they can add IP capacity and IP functionality using KX-NS1000 version 2 with stacking card KX-NS0130 with keeping current PBX. This configuration is useful for new customer also when they need more SLT phone, Digital PT with DSS Console, Analog PT and analog CO as well as IP-Phone.
KX-NS0130
SC card for NS100
KX-NS0131
SC card for NCP
KX-NS0132
SC card for TDA/TDE
Before adding KX-NS1000
After adding KX-NS1000
Analog CO
Analog CO
Direct Connection like TDE600 to TDE620
KX-TDE
KX-TDE
KX-NS1000
CO Card
CO Card
MPR Card
SC Card
SC Card
EXT Card
EXT Card
KX-NCS0130
100 % Feature Transparency like TDE600 to TDE620
IP Network
SLT
KX-DT w/ DSS Console
KX-NT
KX-UT
Other SIP Phone
SIP Softphone
SLT
KX-DT w/ DSS Console
Version 2.01 supports both NCP and TDA/TDE. 5

6. 3. KX-NT Phone Capacity Increase
Total capacity is as follows.
Line
NS1000 x 1
NS1000 x 2
NS1000 x 3
NS1000 x 4 or more
Trunk
256
256 x 2
600
Legacy by stacking card or/and “xxx+SLT2” card
IP incl E1/PRI adapter
SIP
H.323 48
48 x 2 = 96
Extension
640
1000
Digital PT / Analog PT / SLT by stacking card or/and “xxx+SLT2” card
480 SLT (*1) 512 DPT (*2) IP UT
NT (NS1000 V1)
128
128 x 2
128 x 3
128 x N or 1000
NT (NS1000 V2)
256 x 3
(*1) 24SLT x 10 by TDE620 x 2 for example (*2) 256 DPT incl DXDP by TDE620 x 2 for example 6

7. 4. Network Survivability
Back-up is available automatically for SIP trunk incl E1 / PRI adapter, KX-NT/UT IP-phone and one look connection.
PRI/E1 or SIP Provider
Back-up master PBX works as slave PBX usually. But it works as master PBX after master PBX stops working.
Trunk Adaptor
KX-NS1000 (2nd) Back-up Master
SIP Trunk
One-Look AK
One-Look AK
KX-NS1000 (1st) Master
KX-NT
KX-UT
KX-NT
KX-UT
PRI/E1 or SIP Provider
Trunk Adaptor
After master PBX stops working,
KX-NS1000 Back-up Master
SIP Trunk
One-Look AK
One-Look AK
KX-NS1000 Master
KX-NT
KX-UT
KX-NT
KX-UT

8. 5. KX-NT500
KX-NT500 is supported. - KX-NT500 hardware is based on KX-UT for improved hands-free compare to KX-NT3xx - But software is based on KX-NT3xx for full PBX feature support. - Quantity of key is increased for full PBX feature support. - SBC cannot be used because not SIP based. KX-NT543 : 3-line LCD KX-NT546 : 6-linie LCD
⑨ Message ⑩ Pause ⑪ Flash ⑫ Redial
⑬ Auto Ans ⑭ Conf ⑮ Transfer ⑯ Auto Dial
⑰ Fwd/DND ⑱ Hold ⑲ Cancel ⑳ Intercom
⑳ SP-Phone

9. 6. SBC for KX-UT Phone
SBC is available for KX-UT phone for remote connection. KX-NS1000 version 1 works SBC for standard SIP protocol only. Therefore SBC works for 3rd party SIP phone or KX-UT registered as 3rd party SIP phone. KX-UT registered as 3rd party SIP phone needed AK for SIP phone (Not AK for KX-UT/NT phone). And it cannot use PBX flexibility key or PBX speed dial data download. However KX-UT phone with KX-NS1000 version 2 can work as KX-UT phone even in remote office as well as KX-UT phone in the office.
Remote Office or Home HQ
NS1000
IP Network
SBC
KX-NT
KX-UT work as UT (V1/V2)
KX-UT work as UT (V2) KX-UT work as 3rd party SIP Phone (V1)

10. 8. Other Improvement - 1
Blind Transfer (Refer) is supported for 3rd party SIP phone.
10 Jan. 2013
TDE/NCP
NS1000 Version 2
Transfer
Ad-hock Conf.
Transfer (by REFER method)
Attended
Unattended
Blind
Media5 (Media5-fone) OK
N/A -
n/a (No feature)
Counter Path (Bria Android, V )
Counter Path (Bria iPhone, V2.3.2)
3CX (Softphone)
Grandstream (GXP280)
Yealink (T22P)
Screened
Unscreened
Screened
Unscreened
<Transfer definition> Attended Transfer: Transfer is completed after announcing the destination party. Unattended Transfer: Transfer is completed without an announcement. After dialing the destination, while hearing a Ring back tone, the originator can execute the transfer. Blind Transfer: Transfer is completed without hearing a Ring back tone. (without operation to initiate 2nd call with sending INVITE)

11. 8. Other Improvement - 2
Web-MC is improved. - Response speed is faster than version Copy feature is added.

12. 8. Other Improvement - 3
KX-UT670 can work as KX-UT from version (Not as 3rd party SIP phone)
Version 2.04

13. Thank you ! The END