1. Rejuvenated MiCOM P40 Double the practicality
Henri GRASSET
Summer 2014

2. Double the Practicality
Double the security – further enhanced cyber security with RBAC
Double the interoperability – IEC61850 Ed1 & Ed2
Double the availability
Dual IP ports – 2 Independent Ethernet Channels
Seamless and unparalleled redundancy with HSR & PRP
Double the quality
Long proven protection algorithms
Upgraded with well-known Schneider Electric Quality
Double the service – QR code for supporting information
Double the ease-of-use – advanced MiCOM S1 Studio tool

3. IEC 61850 based Protection Schemes
Latest standards
Fully secure, from product to solution
Cost optimized and Reliable
Enabled by powerful new Ethernet

4. New powerful Ethernet solutions
Hardware:
Dual IP ports (2 IPs)
PRP* and HSR* redundancy (IEC 62439)
Universal Irig-B port (Modulated and un-modulated)
Software enhancements:
IEC Ed. 2 (and Ed.1)
Cyber Security evolutions
E3 requirements (Spain)
*PRP: Parallel Redundancy Protocol
*HSR: High-availability Seamless Redundancy

5. Cost optimized and Reliable
PRP* and HSR* communication redundancies
Choice made via configuration
Allows seamless redundancy (no loss of any information)
Optimizes the Ethernet network availability and cost
Dual port (2 IP Addresses)
Allows two physically segregated /independent networks
Universal Irig-B (Modulated and un-modulated)
Plug & Play: No need of configuration
Easy to connect to any kind of Irig-B technology
IEC Standard:
*PRP: Parallel Redundancy Protocol
*HSR: High-availability Seamless Redundancy

6. Fully Secure Cyber Security Not only about ”Cyber” attacks
A “Must have” requirement in many countries and environments
Not only about ”Cyber” attacks
Enables:
Confidentiality,
Integrity,
Availability & Authentication,
Non-Repudiation,
Accountability, Traceability & Detection
Available now!
Standard in the latest MiCOM P40
Configuration security enabled by the Security Admin Tool (SAT)

7. Latest Standards IEC 61850 Edition 2.0 (or Edition 1)
Choice made via configuration
Open, interoperable and well recognised standard
Reduces Engineering time and allows better interoperability
Spain E3 requirements:
Essential for Spanish Utilities and Spanish influenced markets
HSR and PRP
CID* file transfer via Ethernet for Ed2 (“MCL” file for Ed.1)
Time synchronization configuration and monitoring to E3 requirements
*: Configured IED Description

8. Why Dual IP?
Ethernet has become the main technology for Protection & Control
Redundancy is a fundamental necessity for Protection Schemes based on GOOSE and especially for high availability environments
Standardized HSR, PRP (active redundancy) enables:
Interoperability and Interchangeability
0 ms reconfiguration time, thus no loss of data (as no reconfiguration)
Full compatibility with the IEC requirements
LAN B
LAN A
P40
P40

9. Optimised Network Topology 1/2
HSR for Protection
HSR for Protection
Ring A
Ring B
Control
RedBox
RedBox
Network 1

10. Optimised Network Topology 2/2
HSR
HSR
Ring A
Ring B
PRP
RedBox 1
RedBox 2
RedBox 3
RedBox 4
Network 1
Network 2

11. Implementation
Dual IP Ethernet allows 2 fully segregated Station Bus networks
Realistic examples include:
Duplicated Network for Protection and Control (P&C)
Segregated Networks for Control….. And for Protection
Segregated Networks for P&C And for Maintenance
Segregated Networks for P&C And for Digital Fault Recording System (DFRS)
Segregated Networks for P&C And for I/O expansion with P849
DCS