1. EV CONTAINER CORPORATION - REVOLUTIONIZING THE BEVERAGE INDUSTRY Copyright @ EV Container Corporation EV EVkeg Liner Remove & Install Instructions

2. Liner Removal - Fully depressurize the keg - Disengage the handle lock with a flat head screw driver and rotate handle counter clockwise by hand: Copyright @ EV Container Corporation

3. Liner Removal – Warning! - There should never be a need to use a tool to remove the handle - The keg must be fully depressurized before the handle can be moved by hand - Never use a tool to turn the handle – serious injury may result if the handle is forcibly removed while the keg is under pressure Copyright @ EV Container Corporation

4. Liner Removal - Remove the handle assembly and old liner Copyright @ EV Container Corporation

5. Liner Removal - Rotate the handle counter clock wise to disengage the liner - Any remaining liquid can be poured out the liner Copyright @ EV Container Corporation

6. Liner Removal - Remove and discard old liner - The liner is made from recyclable materials Copyright @ EV Container Corporation 7

7. Liner Removal – Warning! Before the first use of your keg the handle assembly must be cleaned… Copyright @ EV Container Corporation

8. Liner Installation - Note the O’ring and bayonet slot in the base of the handle Copyright @ EV Container Corporation

9. Liner Installation - Remove the seal from the Ozone sanitized liner Copyright @ EV Container Corporation

10. Liner Installation - Insert into fitment opening Copyright @ EV Container Corporation

11. Liner Installation - Pull the fitment towards the handle base - Note the finger position – thumbs on the handle and fingers on the liner flange - Rotate handle until the fitment slot is located in the handle base Copyright @ EV Container Corporation

12. Liner Installation - Pull the fitment over the o’ring to create the seal Copyright @ EV Container Corporation

13. Liner Installation - Hold the outside rim of the fitment with one hand - Rotate the handle a ¼ turn clockwise to engage the thread with the handle base Copyright @ EV Container Corporation

14. Liner Installation – Warning! - Do not hold the liner against the valve cage as shown when turning the handle - There is a risk of puncturing the liner Copyright @ EV Container Corporation

15. Liner Installation - Check that the fitment has not been cross threaded - The thread should not be visible. An even gap between the fitment flange and handle base should be seen all the way round Copyright @ EV Container Corporation

16. Liner Installation - Position the spear end at the base of the liner - Compress the middle of the liner with the left hand Copyright @ EV Container Corporation

17. Liner Installation - Compress the top end of the liner with the right hand Copyright @ EV Container Corporation

18. Liner Installation – Warning! - Do NOT wrap the liner around the beer spear - This will make it more difficult for the liner to unwrap evenly within the keg leading to a possible liner failure under pressure Copyright @ EV Container Corporation

19. Liner Installation – Warning! - Ensure the spear end remains engaged in the base of the liner at all times - Avoid creating a fold as shown on installation as this will make it more difficult for the liner to open inside the keg Copyright @ EV Container Corporation

20. Liner Installation - Gently feed the liner into the keg opening Copyright @ EV Container Corporation

21. Liner Installation - Before locking the handle ensure the liner is not pinched by the handle Copyright @ EV Container Corporation

22. Liner Installation - Once in place, rotate the handle clockwise until you hear the handle lock snap in place and you see the lock tab opposite the “lock” indicator as shown Copyright @ EV Container Corporation

23. Liner Installation - Your keg is now ready for the purge and filling process Copyright @ EV Container Corporation

24. EVkeg – contact us www.evcontainer.com EV Container Corporation 2148 Beechcraft Road Unit 300 Vacaville CA 95688 415-460-5341 Copyright @ EV Container Corporation

25. EVkeg – made in the USA Thank you Copyright @ EV Container Corporation