Download presentation
Published byKimberly Bedsworth Modified over 10 years ago
1
If you’re still using a powder-liquid liner
Like VITREBOND... FORGET ABOUT IT. 1
2
Introducing ™ GC Fuji LINING LC Paste Pak
3
™ GC Fuji LINING LC Paste Pak
4
GC Fuji LINING LC Paste Pak ™
Radiopaque Light-Cured Glass Ionomer Lining Material
5
GC Fuji LINING LC Paste Pak
PRODUCT DESCRIPTION • Light-Cured Glass Ionomer Lining Material • Used as base or liner under composite resin or amalgam restorations • Paste-Paste Formulation • Bonds well to tooth structure, composite and metal • Minimizes sensitivity • Provides long-term fluoride release
6
GC Fuji LINING LC Paste Pak
THE IDEAL DENTIN SUBSTITUTE • Flexes and absorbs the stresses caused by polymerization shrinkage, as well as thermal expansion and contraction of composite resin materials. • Toothlike coefficient of thermal expansion maintains the marginal integrity. • Acts as a thermal insulator.
7
GC Fuji LINING LC Paste Pak
EXCLUSIVE PASTE PAK DISPENSING SYSTEM • Anyone can dispense exact mixing ratio • No droplet sizing. No half scoop calculations. No waste. • Adjust the metering slide and dispense the exact amount of material needed. MORE LESS
8
GC Fuji LINING LC Paste Pak
EXCLUSIVE PASTE PAK DISPENSING SYSTEM • Squeeze out as little or as much as needed - Paste Pak delivers exact mixing ratio for optimized physical properties. • Anyone can get a good mix with Fuji Lining LC Paste Pak.
9
GC Fuji LINING LC Paste Pak
SIMPLE TO USE AND EASY TO MIX • Insert Paste Pak into dispenser - twist into position. • Dispense desired amount of material. • Replace cap to keep material fresh. • Mix with spatula for 10 seconds.
10
GC Fuji LINING LC Paste Pak
PERFECT MIX EVERY TIME • Paste Pak Dispensing System always attains 1.0:1.1 Mix Ratio. • Ideal Mix Ratio for best possible physical properties. • Enough material for applications.
11
GC Fuji LINING LC Paste Pak
LIGHT-CURES IN 20 SECONDS • Standard Curing Light (470nm) • Restoration can be completed immediately with amalgam or composite.
12
GC Fuji LINING LC Paste Pak
EXCELLENT HANDLING • Mixed to ideal consistency every time. • Does not “slump” when used as a liner. • Spreads easily to level floor or walls of a prepared cavity.
13
GC Fuji LINING LC Paste Pak
HIGHER FLUORIDE RELEASE • Sustained, long-term fluoride release helps prevent secondary caries and recurrent decay. • Reduces risk of decay at margins. • Fluoride release is recharged with use of fluoridated rinse or dentifrice.
14
GC Fuji LINING LC Paste Pak
STRONG IONIC BOND • Very high bond strength, tensile bond strength and diametral tensile strength. • Strong bond to tooth structure, composite resin and metal. • Reduces the likelihood of marginal fractures. • Optimizes marginal seal of the final restoration.
15
GC Fuji LINING LC Paste Pak
STRONG IONIC BOND
16
GC Fuji LINING LC Paste Pak
MINIMIZES SENSITIVITY • One of the most predictable methods of preventing postoperative tooth sensitivity. • Acts as a thermal insulator. • Toothlike coefficient of thermal expansion maintains marginal integrity. • Low modulus of elasticity enables material to flex and absorb stresses.
17
GC Fuji LINING LC Paste Pak
RADIOPAQUE AND BIOCOMPATIBLE • Radiopacity similar to dentin. • Completely biocompatible - not irritating to tooth structure, soft tissue or pulp.
18
GC Fuji LINING LC Paste Pak
19
GC Fuji LINING LC Paste Pak
STARTER PACKAGE • One Fuji Lining LC Paste Pak Cartridge • One Mixing Pad • One Mixing Spatula. • One Paste Pak Dispenser
20
GC Fuji LINING LC Paste Pak
21
GC Fuji LINING LC Paste Pak
Use as a BASE or LINER under composite resin or amalgam restorations to minimize sensitivity, provide fluoride release and...
22
...FORGET ABOUT POWDER-LIQUID!
GC Fuji LINING LC Paste Pak ...FORGET ABOUT POWDER-LIQUID!
23
BROCHURE
24
BROCHURE
25
ADVERTISEMENT
26
GC Fuji LINING LC Paste Pak
Radiopaque Light-Cured Glass Ionomer Lining Material
27
GC Fuji LINING LC Paste Pak
Sure…there are a few things we still could use powder-liquid for.
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.