1. Traditional Unit Ventilators– UVF &UHF
Product Overview

2. Traditional Unit Ventilators– UVF &UHF
CFM
Two Motor Options
PSC w/Autotransformer
Low Cost Motor
Only for Low Static Conditions (<.09”)
One motor for All sizes!
ECM
High Efficiency Motor
Taps allow low to high static
(.10” to .45”)
Variable Speed Option (0-10 V)
Six Control Options
Field Supplied Controls
Pneumatic Interface
DDC Ready (Easy Interface for field installed controls)
Factory Controls (BACnet)
Factory Controls (LonTalk)
Custom Controls

3. Magic Aire UVF & UHF Models– Competitive Analysis
McQuay
Trane
Sound
Good
Modular Design
Yes No
Draw Thru (DT) vs. Blow Thru (BT) DT BT
One Piece OA/RA Damper (no linkage required)
500 CFM Unit
Motor Option Comparison
Standard ECM Motor
Variable Speed ECM Motor
Control Package Comparison
DDC Ready (Sheet metal Panel, Damper Actuators, transformer)
Standalone Capability
Networked Capability (BACnet)
Variable ECM Speed integrated with factory controls

4. Magic Aire UVF & UHF Models– Features and Spec Items
Modular Draw-Thru Design
Up to 7-Rows of Coil Combinations (CW, HW, DX, Steam, and Electric Heat options)
Removable Top
Double Sloped Drain Pan for Improved IAQ
Low Limit Stat Standard on leaving side of all Coils
2” Deep Filter Option
Coils are now rated for a maximum EWT of 200°F
Superior One-piece Extruded Aluminum Outdoor/Return Air Damper
Wiring Harness for mistake proofing wiring
Superior sealing Extruded Aluminum Face & Bypass Damper
AHRI 840 Certified
Broad size Range – 500 to 2000 CFM
Insulated OA/RA Damper Section –Standard 1/8” &
Variable Fan Speed Control
Cold Weather option 3/8”

5. Outdoor/Return Air Damper
The MAUV is certified under the AHRI 840 program for Unit Ventilators and ETL listed.
A key feature of the Magic Aire UV is that our one-piece heavy gauge extruded aluminum damper that allows for full sealing and is not prone to breaking, warping, or binding.
The MAUV is certified under the AHRI 840 program for Unit Ventilators to provide ventilation air greater than 80% of rated standard air flow and is ETL listed to US and Canadian Safety Standards, such as ANSI/UL The MASCB will also be certified to the same standards. Currently our competitor is not certified.
A key feature of the Magic Aire UV is that our design is a one-piece heavy gauge extruded aluminum damper that has integral curved web to afford maximum rigidity. Our competitors have dual dampers connected by mechanical linkage making them more prone to air leakage. This is a unique feature and a big hit with engineers.

6. Optimized Blower Section with Polymer Fans
Polymer blower wheel optimized to deliver the appropriate amount of airflow at reduced speeds which translates to Reduced sound levels
Rigorous Design/Testing process
Polymer Blower Wheel
Galvanized Steel Blower Housing
Lower RPM
Key! Lower Noise Levels and Vibration
Balanced Fan Assembly
No Center Bearing
Two Point Shaft Alignment

7. Motor Options and Design
Motor and Bearing Located Out Of Air Stream
Long Life
Quick, Easy Replacement - Separate from Fan Assembly
ECM Motor Option
Operation at any speed, adjusting to static resistance
More efficient than PSC Motors

8. CFM Low Med High Three Speed Fan Control Options 3 Speed Switch
ECM 5.0 Motor

9. Variable Fan Speed – New Option!
Fan Control Options
Variable Fan Speed – New Option!
ECM 5.0 Motor
Controller by Others

10. Filter Selection and Features
Utilizes 1” or 2” Thick Filters in Throwaway, Permanent, or Renewable styles
Field Changeable from 1” to 2”
2” Thick Filters Improve IAQ
2” - MERV 8
Easily removed by quarter turn latches
FILTER DOOR WITH QUARTER TURN LATCHES

11. Electric Heat Coil Section
EH elements are open wire type.
Mounted in individual heavy gauge galvanized steel frames and suspended in ceramic insulators.
Dual capillary type thermal sensing elements, one automatic reset and one manual reset
Each circuit above 48 amps is protected by its own fuses

12. Unit Vent Valve Packages
VP1: TAC Control Valve and actuator, unions, and ball valves
VP2: TAC Control Valve and actuator, unions, 1-ball valve, and 1-circuit setter
VP3: TAC Control Valve and actuator, unions, 2-ball valves and wye strainer
VP4: TAC Control Valve and actuator, unions, 1-ball valve, 1-circuit setter, and wye strainer
Custom VPs possible:
18” (H) x 9” (D) x 9” (W) max dims

13. UV Direct Expansion Coils
R-22 and R-410A DX coils available
R-22 coils field convertible for R-410A cooling service (Technical Bulletin available for instructions)

14. Draw Thru Vs. Blow Thru Design
Supply Air
Outside Air
Allows return air to bypass coil and unconditioned outdoor air to pass through coil for better dehumidification
Even distribution of air across the coil face
Face and Bypass damper (FBP) is in the low velocity air stream
Leaving air stream is at a uniform temperature
Concentrated areas of air across the coil
Fan sound can vary depending on Face and Bypass position
Unconditioned outside air can be bypassed around coil not allowing dehumidification

15. Freeze Protection
A low limit thermostat is factory installed on all units with Hydronic and DX coils.
For extra freeze protection, a FBP damper is recommended to protect from coil freeze-up. That’s because there is a constant flow of hot water through the coil, and water that is flowing typically does not freeze.
Units feature a one piece Outside Air / Return Air damper made of heavy gauge extruded aluminum material with airtight seals to prevent unwanted air from entering the unit. The damper is insulated with closed cell foam insulation. We also offer an optional cold weather damper section that has thicker insulation for maximum cold weather protection.

16. UV Support
Webinars
NM4 software
Product Presentation – See Website for newest
Marketing Brochure - NEW
Submittals – in NM4
Diagnostic Sheets and Videos – Website
Available Literature – See website for most updated
Guide Spec
Catalog
IOM
Control Guides

17. UV Support – Specifications
Guide Spec – This is the primary document to reference when asked to reviewing a specification
UV Catalog – Secondary Source with many details on unit set up and configurations
Control Guides – all details on controls including components and sequence of operation in these LON or BACNet guides
FAQs – list of top questions. Competitive flag checklist also available

18. Magic Aire UV– Sample Units
UV “Light Weight” Samples
Perfect for Shows or Presentations!
Light Weight
Cut Outs with Lexan Windows
Handles added to Dampers
DDC Ready Hinged Panel
All of UV key features
Low Cost of $575
OR – we can sell just the OA damper section

19. Please visit our website!
Thank you!
Please visit our website!
magicaire.com