1. MT 1 will be on Wednesday Oct. 31st, 2012 at 1830. MT 1 will include: Introduction (Chapters 1-2) Cars, planes, freight (Chapter 3,5,A, some of 15 on freight) Wind (Chapters 4, B) Heating and Cooling (Chapters 7, E)

2. Heating and Cooling

3. Domestic Water Heating Heat Capacity: (C V ) Amount of heat necessary to change the temperature by 1 º C per unit volume For water C V =4100 J / liter / ºC Energy required to heat water in a bath from 10 ºC to 10 ºC ?

4. Domestic Water Heating

12. The two dominant reasons why buildings lose heat are:

13. 1. Conduction – heat flowing directly through walls, windows and doors; 2. Ventilation – hot air trickling out through cracks, gaps, or deliberate ventilation ducts.

14. Conduction Loss: Related to the conduction of the wall

16. Ventilation Loss: The number of changes N of the air per hour, The volume V of the space in cubic meters, The heat capacity C, The temperature difference  T between the inside and outside of the building

23. 78 % 22 %

24. Total leakiness of the house: 322 W/ º C = 7.7 kWh/d/ º C The heat-loss parameter of this house (total floor area 88m 2 ) is: 3.7 W/ º C/m 2 Let’s use these figures to estimate the house’s daily energy consumption on a cold winter’s day, and year-round.

28. The heat-loss parameter of this house is reduced by about 25%, from 3.7 to 2.7W/ º C/m 2. 1.1W/ º C/m 2 required of a “sustainable” house in the new building codes  Further reduced the consumption by reducing the thermostat setting from 20 to 17 º C.

29. Air-exchange Once a building is really well insulated, the principal loss of heat will be through ventilation (air changes) rather than through conduction. Hot Air Cold Air

30. Air-exchange Once a building is really well insulated, the principal loss of heat will be through ventilation (air changes) rather than through conduction. Hot Air Cold Air Can we cool down the hot air before it leaves the house?

31. Nose

34. Exercise: Consider a 100 m 2 sustainable house in İstanbul with 1.1W/ º C/m 2 energy consumption. Let’s use these figures to estimate the house’s daily energy consumption on a cold winter’s day, and year-round.

35. 1.1x20x100 = 2200 W 2200 W consumed during one day : 2.2 kWx24 h=52.8 kWh/day For a cold Day:  T=20 º C

36. http://weather.sg.msn.com/monthly_averages.aspx?wealocations=wc:TUXX0014&q=%C4%B0stanbul %2C+TUR+forecast:averagesm For an average day:  T= ?

37. For an average day:  T= 20-14 º C 1.1x6x100 = 660 W 660 W consumed during one day : 0.66 kWx24 h=15.8 kWh/day

38. Exercise: What are the main mechanisms that lead to heat losses in a building?

39. Exercise: What are the main mechanisms that lead to heat losses in a building? Conduction Ventilation

40. Exercise: Looking at the plot below estimate the energy consumption of a modern 50m 2 apartment in Istanbul in February and in November. Assume energy consumption to be 1.1W/ º C/m 2 for the modern apartment.

41. Exercise: Rate at which energy is produced by a wind mill is given by the equation below. Interprete this equation and describe the factors effecting the generated power.

42. Exercise: Heat loss due to conduction is quantified by the equation below. Interprete this equation and describe the factors effecting the generated power.

43. Exercise: Heat loss due to ventilation is quantified by the equation below. Interprete this equation and describe the factors effecting the generated power. N number of changes of the air per hour

44. Exercise: Describe the main principle of energy generation with a windmill. What is the nature of energy in the wind and how is it converted to electricity?

45. Exercise: What can be done to reduce the heat losses due to conduction and ventilation in a building?

46. Exercise: What are some exemplary geographic locations where wind speed is highest in Turkey? What are the average wind speed values n those regions? How does wind speed change with altitude?

47. Exercise: What are the main parts of an AC power generator. Describe its principle of operation.

48. Exercise: What is heat capacity? Can you estimate the energy required to boil water in a kettle that is totally filled? For water C V =4100 J / liter / ºC