1. 3M Industrial Adhesives and Tapes Division Cyanoacrylate, Anaerobic and Structural Adhesives © 3M 2007. All Rights Reserved RITE-LOK™ Product Range Overview Cyanoacrylate, Anaerobic, Structural and UV Curing Solutions

2. 2 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. Agenda  Overview of RITE-LOK™ Adhesive Range  Features and Benefits  RITE-LOK™ Products – how they cure/physical properties  Applications

3. 3 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Overview RITE-LOK™ – Premium brand  Cyanoacrylate adhesives  Anaerobic adhesives and sealants  Acrylic/Epoxy adhesives  UV adhesives  Activators and primers

4. 4 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Markets RITE-LOK™  Industrial  Automotive  Medical Devices  Marine

5. 5 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Approvals  USP Class 6 (for use on medical devices)  All RITE-LOK™ PR cyanoacrylate adhesives  UV011  DVGW EN751/1 (gas)  RITE-LOK™ PS77  WRAS (potable water)  RITE-LOK™ RT38  Railpart (railway rolling stock maintenance)  16 catalogue numbers

6. 6 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Approvals Railpart part numbers (not 3M stock numbers)

7. 7 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. Why Use Adhesives?  Replace screws, nails, bolts, clamps, rivets, welding, soldering, etc.  Joint stress distributed evenly through the joint  No damage to substrates  Bond and seal joints  Reduces weight (number of components) and cost  Fast and convenient  Most products have excellent fluid resistance

8. 8 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. Understanding RITE-LOK™ Adhesives  Instant bonding  Cyanoacrylate adhesives  Thread sealing/locking, pipe sealing, retaining and gasketing  Anaerobic adhesives  Structural bonding  UV & Acrylic adhesives

9. 9 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Cyanoacrylate Adhesives

10. 10 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Cyanoacrylate Adhesives Instant Bonding  RITE-LOK™ Cyanoacrylate Adhesives  RITE-LOK™ Activators  RITE-LOK™ Primer  RITE-LOK™ Debonder

11. 11 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Cyanoacrylate Adhesive Properties  Rapid curing, easy-to-use, single component adhesives  High shear and tensile strength  Economical  Solvent free formulations  Bonds a wide variety of substrates  Substrate specific formulations

12. 12 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Cyanoacrylate Adhesives  ECmulti-purpose applications  MCmetal bonding  HThigh temperature  RTrubber toughened (impact resistant, high temperature)  LOlow odour, low bloom  SIsurface insensitive (acidic or porous substrates)  PR*plastics and rubbers  SFsuper fast (rapid bonding)  XFextra fast (very rapid bonding) *USP Class 6 approval for medical devices

13. 13 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Cyanoacrylate Adhesives Product number system PR1500 PR = Plastic and Rubber adhesive 1500 = 1500 cPs (high viscosity)

14. 14 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Cyanoacrylate Adhesives Which grade ?  Choose the correct grade for the substrate or application Rubber – PR High temperature – HT or RT Wood - SI  Choose the viscosity. Does the application require: LOW (5 cPs) - Post assembly (adhesive applied after final assembly) MEDIUM (100 cPs) – Most applications HIGH (1500 cPs) - Porous (most woods, foam rubber) VERY HIGH (Gel) - Vertical or underside applications

15. 15 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Cyanoacrylate Adhesives Mechanism of RITE-LOK™ Cyanoacrylate Adhesive cure An acidic stabiliser (red) keeps cyanoacrylate liquid Water particles (blue) on the substrate surface neutralise the stabiliser Polymerisation begins and the parts are bonded together

16. 16 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Cyanoacrylate Adhesives Where not to use cyanoacrylate adhesives!  Where the application will be submerged in water or constantly wet These conditions can soften the adhesive and may cause failures  Where there are low ambient humidity conditions These conditions will slow down the curing process  Cyanoacrylate adhesive will bond to glass, but failure is likely later Silane based substrate where insufficient chemical bonds are made with the surface of the glass  Please remember!  Thin bond lines give the strongest bond and cure most rapidly

17. 17 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Cyanoacrylate Activators RITE-LOK™ Activators are designed for:  Rapid curing of RITE-LOK™ cyanoacrylate adhesives–even below 0º C  Curing on difficult to bond substrates (for example, wood)  Curing where gap-filling is required  Before assembly  apply to one substrate only  parts should be assembled immediately the activator is dry  on-part life of 15 minutes  After assembly  spray on the joint to cure any uncured adhesive  Shelf life – 12 months (AC800 – 9 months)

18. 18 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Cyanoacrylate Activators RITE-LOK™ Activators  AC11 – standard activator for most applications  AC12 – sensitive plastics and medical device applications  The use of RITE-LOK™ Activators can reduce the bond strength of the joint by up to 30%  Always test for compatibility when using on plastics to prevent stress cracking

19. 19 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Cyanoacrylate Primer RITE-LOK™ Cyanoacrylate Primer (AC77) is designed for:  Surface conditioning of substrates to allow improved bonding to substrates with low surface energy, for example: Polypropylene Polyethylene PTFE Silicone rubber  AC77 should be applied to the low energy substrate only and allowed to dry before assembly  On-part (work) life up to 8 hours

20. 20 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Cyanoacrylate Debonder RITE-LOK™ AC68 Debonder is designed for:  Removing cured and uncured cyanoacrylate adhesive  Removing small marks or finger marks  Removing cyanoacrylate adhesive build-up on production lines  Inclusion in first-aid kits where cyanoacrylate adhesive is in use  AC68 is not designed to penetrate the joint and release bonded joints

21. 21 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Cyanoacrylate Applications  Automotive interiors (steering wheels, door trim, gear stick/gaiter)  Steering gaiter  Automotive door seals  Automotive rubber hosing clips  Loudspeakers  Medical devices, e.g. needle bonding  Filter assembly  Small arms ammunition  MRO (o-ring bonding and general maintenance)  Sports equipment  Shoe manufacture and repair  Finger printing  Embalming – bone reconstruction

22. 22 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Anaerobic Adhesives and Sealants

23. 23 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Anaerobic Range What is an anaerobic adhesive?  Anaerobic adhesives cure in the absence of oxygen and in the presence of metal ions  To keep the adhesive in a liquid state, an air space is left in the bottle and the low density container allows air migration How does an anaerobic adhesive cure? After assembly Solid Oxygen present - the adhesive remains liquid Before assembly AIR Liquid Oxygen excluded/the adhesive is in contact with metal - the adhesive cures to form a tough, durable plastic film which bonds and seals the joint

24. 24 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Anaerobic Range properties Cured RITE-LOK™ anaerobic products have the following properties:  Replacement of traditional mechanical methods of sealing/bonding components, giving:  Cost saving  Weight saving  Vibration resistance  Corrosion resistance  Fluid resistance  Environmental resistance  Cure only in the joint – excess can be easily removed

25. 25 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Anaerobic Range  Threadlocking Low, medium and high strength, penetrating  Thread sealing Fine and coarse threads  Pipe Sealing and High Pressure Sealing Sealing threaded joints on systems containing fluids  Retaining High strength bonding of cylindrical parts  Gasketing Sealing flat machined metal surfaces

26. 26 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Anaerobic Range Which grade ?  Choose the strength LOWSmall fasteners, easy disassembly MEDIUMBetter vibration resistance, more difficult to disassemble HIGHFor permanent applications, difficult to disassemble  Choose the viscosity LOWPost assembly (adhesive applied after final assembly), close fitting parts and curing porosity in cast components or welded joints MEDIUMMost applications HIGHLarger gap filling up to 0.4mm

27. 27 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Anaerobic Range Properties Threadlocking properties  Vibration resistance Break loose and prevailing torque  Corrosion resistance All gaps are filled with cured adhesive preventing fluid leakage in/out  Excellent fluid resistance Most automotive fluids – coolants, fuel, lubricants, brake fluid and many solvents  Excellent environmental resistance Water, salt spray, temperature

28. 28 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Anaerobic Range Properties Threadlocking properties  Replaces traditional mechanical methods Lock washers Split pins Nylok nuts Wiring Spring washers, etc.  Cures only in the joint Excess adhesive can be easily removed leaving aesthetic finish

29. 29 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Threadlocking and Sealing Range  TL22 Screwlock  TL42 Nutlock  TL43 Nutlock  TL62 Nutlock  TL70 Studlock  TL72 Studlock  TL90 Penetrating  PS65 Pipe Sealant (white)  PS77 Pipe Sealant  HP42 High Pressure Sealant High Strength Green, Red Medium strength Blue Low strength Other colours

30. 30 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Anaerobic Range Properties Retaining properties  Vibration resistance Shear strength  Corrosion resistance All gaps are filled with cured adhesive preventing fluid leakage in/out  Excellent fluid resistance Most automotive fluids – coolants, fuel, lubricants, brake fluid and many solvents  Excellent environmental resistance Water, salt spray, temperature

31. 31 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Anaerobic Range Properties Retaining properties  Replaces traditional mechanical methods Keyways Splines Split pins Wiring Heating or freezing  Eliminates fretting No wear in the joint  Cures only in the joint Excess adhesive can be easily removed

32. 32 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Retaining Range All RITE-LOK™ Retainers are high strength (green colour) except RT41  RT01Low viscosity  RT20GHigh temperature/high viscosity  RT38Very high strength, high viscosity  RT41Bearing Fit – low viscosity, medium strength  RT48High temperature, fast curing

33. 33 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Pipe Sealant/High Pressure Sealant Range  PS65 Pipe Sealant (white)  PS77 Pipe Sealant  HP42 High Pressure Sealant

34. 34 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Anaerobic Range Pipe Sealant/High Pressure Sealant properties  Vibration resistance Break loose and prevailing torque  Corrosion resistance All gaps are filled with cured adhesive preventing fluid leakage in/out  Excellent fluid resistance Most automotive fluids – coolants, fuel, lubricants, brake fluid and many solvents and gases  Excellent environmental resistance Water, salt spray, temperature  No contamination of the system Does not shred like PTFE tape – no fouling of valve seats, filters

35. 35 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Anaerobic Range Pipe Sealant/High Pressure Sealant properties  Lubricates assembly Pipe sealants contain PTFE  Excellent sealing properties Instant low pressure seal After curing, joint exceeds the burst pressure of the pipe  Easy alignment of joints/gauges Products cure at the assembled angle  Cures only in the joint Excess adhesive can be easily removed  Easy disassembly Allows easy disassembly – even after long periods of service

36. 36 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Gasket Range What is a gasket? A device for sealing two flat surfaces to prevent leakage

37. 37 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Gasket Range For use on MACHINED metal parts only:  GM10High temperature/rigid – identical substrates  GM18Flexible – dissimilar substrates  GM74Flexible – dissimilar substrates

38. 38 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Anaerobic Range Gasket properties  Replace conventional mechanical gaskets Reduces inventory A gasket is unique to only one joint RITE-LOK™ liquid gaskets can seal any shape or size of joint Reduces cost Reduces weight Gaskets can be damaged during assembly, RITE-LOK™ stays liquid until assembled  Can be applied automatically or manually Gaskets have to be applied manually  No shimming effect Metal to metal contact prevents torque relaxation on the fasteners

39. 39 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Anaerobic Range Gasket properties  Improves sealing and power transmission Joint is bonded and clamped  No shrinkage or cracking Some liquid sealants can shrink as they cure – not RITE-LOK  Can be used on vertical/underside surfaces Gaskets are difficult to apply to these surfaces  Fills surface imperfections Blocking potential leak paths  Immediate low pressure seal after assembly Important where the customer needs to pressure test before assembly continues

40. 40 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Anaerobic Adhesives  RITE-LOK™ anaerobic adhesives will not cure on plastic parts No metal ions present to start the polymerisation process  Do not use on oxygen/oxygen-rich or chlorine systems Uncured anaerobic adhesive can be hazardous in these conditions  Do not allow customers to apply anaerobic adhesives by dipping or brushing parts Metal particles will contaminate the adhesive in the container causing polymerisation  Any parts of dispensing machines which come into contact with anaerobic adhesives must be manufactured from plastic, PTFE or stainless steel

41. 41 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Anaerobic Primer/Activator RITE-LOK™ anaerobic primer (AC64) is designed for:  Surface conditioning of passive substrates such as: Aluminium Zinc Stainless steel, etc  Rapid curing of RITE-LOK™ Anaerobic Range Even at low temperatures  Curing products where larger gap filling is required Apply to both substrates for maximum gap filling  On-part (work) life up to 30 days  RITE-LOK™ AC64 is available in 1 litre pack size

42. 42 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Anaerobic Primer/Activator  Using RITE-LOK™ Primer/Activator can reduce final product strength by up to 30%  Always test parts if using on plastic or coated substrates to ensure compatibility

43. 43 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. Threadlocking Applications  Automotive  Engines  Gearboxes  Starter motors  Alternators  Fuel systems  Oil pumps  Water pumps  Fuel pumps  Compressors  Industrial gearboxes  Electric motors  Flour milling equipment  Printing machines  Fire sprinkler systems  Spectacle manufacture and repair RITE-LOK™ Anaerobic Range

44. 44 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Anaerobic Range Retaining Applications  Bearing installation  Gears on shafts  Pulleys on shafts  Engine cylinder liners  Pedestal joints on raised access flooring  Bonding bronze seals in industrial valves

45. 45 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Anaerobic Range Gasket Applications  Industrial gearboxes  Compressors  Machined covers on machines – printing, paper making, etc  Electric motor end covers  Engine joints  Automotive gearbox joints  Printing machines

46. 46 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Structural Adhesives

47. 47 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Structural Adhesives Range  RITE-LOK™ Epoxy Epoxy putty Electrically Conductive  RITE-LOK™ Acrylic adhesives Two-part adhesive Adhesive/activator  RITE-LOK™ UV Curing adhesives Cure on demand, single part adhesives

48. 48 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Structural Adhesives Range How do RITE-LOK™ Structural Adhesives cure?  Some adhesive systems require external stimulation to polymerise: Cyanoacrylate adhesivesMoisture Anaerobic adhesives Metal ions/no oxygen UV adhesives UV light  RITE-LOK™ structural adhesive formulations contain everything that is required for polymerisation as: Adhesive/hardener RITE-LOK™ EP20, SL65 and SA40 Adhesive/activator RITE-LOK™ SA30

49. 49 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Structural Adhesives RITE-LOK™ Epoxy Putty EP20  Easy to use  Fixture time 10 minutes  Ideal for metal, GRP, plastic and wood repair  Can be drilled, tapped, filed, sanded and painted

50. 50 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Structural Adhesives RITE-LOK™ Epoxy Putty EP20 applications:  Balancing electric motors  Sealing leaks in:  Water tanks  Pipes  Radiators  Fuel tanks  Filling holes/scratches  Repairing broken/cracked parts

51. 51 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Structural Adhesives RITE-LOK™ SL65  2-part silver-filled epoxy  Electrically conductive  Pot life1-2 hours  Fixture time 4 hours  Max. temperature 150 degrees C  Excellent chemical resistance  Uses include bonding heat sensitive components to PCBs, connecting ground wires and many electrical connectivity joint repair

52. 52 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Structural Adhesives RITE-LOK™ SA30  Toughened acrylic adhesive used with activator AC38  Bonds metal, wood, most plastics, ceramics, glass  High handling strength in minutes  Excellent resistance to:  Impact  Peel  Temperature  Environment

53. 53 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Structural Adhesives RITE-LOK™ SA40  ‘Bead-on-bead’ two-part adhesive  Colour Pale green  Tensile shear strength 9 N/mm²  Fixture time30 seconds  Full cure24 hours  Excellent resistance to: Impact, Thermal Cycling, Environment  Operating temperature–50 to 120º C (continuous)  Maximum gap fill0.3mm  Shelf life 12 months

54. 54 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Structural Adhesives Structural Adhesive Applications  Magnet bonding in:  Electric motors  Alternators  Loudspeakers  Architectural/construction fabrications  Automotive roof bars  Automotive window mechanisms  Furniture manufacturing  Name plate bonding

55. 55 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ UV Adhesives

56. 56 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ UV Adhesives RITE-LOK™ UV adhesives  Controllable, on-demand rapid curing  One substrate must allow UV light exposure to the bond area  Excellent optical clarity  High impact resistance  Good gap filling properties  Bonding, tacking, coating and potting applications

57. 57 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ UV Adhesives How do RITE-LOK™ UV adhesives cure?  RITE-LOK™ UV adhesive formulations contain monomers and photoinitiators  When exposed to UV light, photoinitiators change into free radicals  Free radicals stimulate the formation of chains of monomers and the adhesive cures

58. 58 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ UV Adhesives RITE-LOK™ UV adhesives range  UV02 - Potting (high viscosity)  UV011* - Metal/plastic bonding (including polypropylene)  UV50 - Multi-purpose bonding (also cures using visible light)  UV51 - High strength decorative or structural glass bonding  UV55 - Bonding crystal glass/metal  UV57 - Rapid cure, very clear, glass/glass  UV60 - Medium/high viscosity, very high bond strength on glass/metal joints  UV75 - Tough, high gloss protective coating  UV301 - Low/medium viscosity, rigid PVC and polycarbonate substrates  UV843 - Rapid curing, high strength, glass/metal joints *USP Class 6 approval for medical devices

59. 59 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ UV Adhesives  Check light penetration of substrates One substrate must allow the passage of UV light!! Some plastics only allow a little UV light penetration Some substrates may contain UV absorbent films/chemicals  Protect uncured adhesives from light Keep the cap on the container when not in use Keep in the supplied container  Match the lamp wavelength to the photo-initiator of the product This will ensure a tack-free surface for potting and coating applications  Beware of shadow areas where the UV light can not penetrate to the bond line

60. 60 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ UV Adhesives  Curing RITE-LOK™ UV adhesives requires an Ultra Violet light source  Important to be able to offer a ‘complete solution’ to 3M customers  UV Light Technology Ltd, Birmingham  Paul Jackson  +44(0)121 423 2000  Paul@uv-light.co.uk

61. 61 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ UV Adhesives UV light – Safety  Low level exposure to certain UV wavelengths provide some health benefits  Synthesis of vitamin D3  Over exposure to UV light can cause adverse health effects  Erythema – skin  Photokeratitis and photoconjunctivitis – eyes  Adverse effects mainly caused by wavelengths below 315nm (UV-B and UV-C)  Level of risk depends on  UV wavelength  UV irradiance values  Personal exposure time

62. 62 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ UV Adhesives UV light – Personal protection Personal Protective Equipment For use when engineering and administrative control measures still allow an unacceptable risk Protection of the skin  Handswear gloves  Armswear long sleeves  Facewear UV absorbing shield (also provides eye protection)  Skinuse appropriate factor sunscreen Protection of the eyes  UV protective spectacles, goggles, visors or face shields (must conform to BS EN 170 and BS EN 166)  Essential for anyone who has undergone eye lens surgery and has been fitted with artificial lenses or has no lens

63. 63 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ UV Adhesives  Medical devices  Balancing electric motors  Environmental coating of electronic/ electrical contacts  Glass covers on watches/clocks  Glass bevels on double glazed window units  Protective coating on air cylinders  Furniture – glass/metal  Loudspeakers  Badge manufacturing  Point of Sale display  Fire Alarms  Electronics  Instruments  Opto-electronics  Jewellery  Awards  Lens bonding  Packaging Applications:

64. 64 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ High Temperature Silicone Sealant RITE-LOK™ SC6151  Moisture curing  High temperature sealant, adhesive and gasketmaker  Excellent flexibility to withstands joint movement and impact  Good fluid resistance  Excellent gap filling properties  Available in 310ml cartridges

65. 65 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. RITE-LOK™ Dispensing Nibs TT18 - mediumTS21 - fineE15 - large Use with all RITE-LOK™ adhesives Use only with RITE-LOK™ cyanoacrylate adhesives CT22LL – fine bead application

66. 66 3M Industrial Adhesives and Tapes Division © 3M 2007. All Rights Reserved. Thank you for your time!