1. เทคโนโลยีการสร้างอุปกรณ์จับยึด
Types and Functions of Fixtures
อ.ธรรม์ณชาติ วันแต่ง สาขาเทคโนโลยีการผลิต มหาวิทยาลัยราชภัฏเพชรบูรณ์

2. Fixtures Classification of Fixtures
Fixtures are normally classified by the type of machine on which they are used
Milling fixture
Latch-radius fixture
...

3. Jig and Fixture Design
Jig: A device that holds the work and locates the path of the tool.
Fixture: A device fixed to the worktable of a machine and locates the work in an exact position relative to the cutting tool.

4. Fixture แบบง่าย

5. Fixtures Milling fixtures Fixture components
Fixture design considerations
Sequence in laying out a fixture

6. ชนิดของ Fixture Plate Fixture Angle Plate Fixture
- Modified Angle Plate Fixture
3. Vise Jaw Fixture
4. Indexing Fixture

7. Fixtures: Types of Fixtures
1. Plate fixtures
Simplest and popular form of fixture
Made form flat plate
Varity of clamps

8. Plate fixtures

9. Fixtures: Types of Fixtures
2. Angle-plate fixtures
Used for machine the parts at precise angle

10. Fixtures: Types of Fixtures
2. Angle-plate fixtures
Used for machine the parts at precise angle

11. Fixtures: Types of Fixtures
3. Vise-jaw fixtures
Used for machining small parts
Standard vise-jaws are replaced with jaws that are formed to fit the part

12. Fixtures: Types of Fixtures
4. Indexing fixtures
Very similar to indexing jigs

13. Fixtures: Types of Fixtures
4. Indexing fixtures
Used for machining parts that have machined details every spaced

14. Fixtures: Types of Fixtures
5. Multi-station fixtures and duplex fixtures
For high-speed, high-volume production runs, where the machining cycle must be continuous

15. Duplex Fixture or Multistation Fixture
ชิ้นงาน
ชิ้นงาน

16. Fixtures: Types of Fixtures
Profiling fixtures
To guide tools for machining contours that machine cannot normally follow

17. Fixture components Fixture base
Fixture components and the workpiece are usually located on a base, which is securely fastened to the milling machine table.

18. Fixture components Clamps
Clamps counteract forces from the feed of the table and rotation of the cutter.

19. Fixture components Set blocks
Cutter set blocks are mounted on the fixture to properly position the milling cutter in relation to the workpiece.

20. Jigs and Fixtures Design Second Edition, EDWARD G. HOFFMAN
เอกสารอ้างอิง
Jigs and Fixtures Design
Second Edition, EDWARD G. HOFFMAN
Chapter 26 Jigs and Fixtures