1. Dr. Nihad Almughany University of Palestine
Faculty of Applied Engineering and Urban Planning
Dept. of Architecture
2nd Semester
Building Construction II (EAAS 3202 )
Lecture 6
PLASTERING WORKS
Dr. Nihad Almughany 1 1
Dr Nihad Almughany- Introduction to Interior Design- 2008

2. Review of Last Lecture Glazing: Types of Glass and application
Factors taken in consideration in glazing:
Tolerance
Glass edges
Rebate
Glazing methods:
Glazing without beads
Bead Glazing
Gasket Glazing
Patent Glazing 2

3. Preparatory works before plastering:
Plastering Works
Preparatory works before plastering:
Electric, mechanical and communication networks
Plumbing networks
Windows and doors frames (for some types only)
Sills 3

4. Plastering Works Intermediate internal surface for final finishing
Advantages of Plastering:
Intermediate internal surface for final finishing
Provide an external surface and appearance
Prevent damp
Internal partition
False ceilings
(Therefore, plaster should be able to adhere on the surface and stand whether changes) 4

5. Internal Plastering Materials of Internal plastering:
Cement: Portland normal cementالاسمنت البورتلاندي العادي
Lime الجير المطفأ
Water الماء الخالي من الشوائب
Metal lath:الشبك المعدني
Strip mesh
Corner mesh
Corner bead
Plaster stop bead
Metal lath sheets 5

6. Internal Plastering Scratch coat:طبقة الطرطشة ( المسمار)
Layers of Normal (cement) plastering:
Scratch coat:طبقة الطرطشة ( المسمار)
Cement (1) - sand or trabya (2)
Brown coat: طبقة البطانة (الخشنة)
Cement (1) - Lime (.5) - sand or trabya (4) - Water
Finish coat:
Cement (1) - Lime (1) - sand or trabya (4) - Water
ملاحظة ( القصارة على الشبك المعدني للأسقف المعلقة أو القواطع تتكون من طبقتي البطانة والظهارة فقط ولكن بدون جير ويستبدل بمواد ملدنة 6

7. External Plastering Scratch coat:طبقة الطرطشة ( المسمار)
Layers of Normal (cement) plastering:
Scratch coat:طبقة الطرطشة ( المسمار)
Cement (1) - sand or trabya (2)
Brown coat 1st layer: طبقة البطانة الأولى (الباطون)
Cement (1) - sand or trabya (1) – Poly bond (glue) – Water
Brown coat 2nd layer: طبقة البطانة الثانية
Cement (1) - lime (.25) - sand or trabya (3) – Water
Finish coat:
Cement (1) - Lime (.5) - sand or trabya (4) - Water 7

8. External Plastering Scratch coat:طبقة الطرطشة ( المسمار)
External Plastering – Stucco :القصارة بالشبريز
Scratch coat:طبقة الطرطشة ( المسمار)
Cement (1) - sand or trabya (2)
Brown coat 1st layer: طبقة البطانة الأولى (الباطون)
Cement (1) - sand or trabya (1) – Poly bond (glue) – Water
Brown coat 2nd layer: (roughخشنة ) طبقة البطانة الثانية
Cement (1) - lime (.25) - sand or trabya (3) – Water
Stucco coat:طبقة الشبريز
Cement (white) (1) - Quartz (3) – Water - color 8

9. Implementation of Plastering Works
Rules of plastering implementation:
1- Cleaning the surface
2- Remove reliefs and fill holes (in layers not exceeding 15 mm)
3- Spray water
4- Fix metal laths
5- Scratch coat – after 24 hours spray water for one day and leave it to dry
6- To achieve a level surface apply leveling elements at the level of brown coat((البقج والودعات
ملاحظة: من عيوب البقج والودعات أنها مكلفة للمواد وللوقت و لا تستخدم في غزة لهذا السبب ولأن البلوك المستخدم في البناء منتظم ومستو والعمال مهرة ومدربين 9

11. Implementation of Plastering Works
Rules of plastering implementation (con.):
7- Applying brown coat and leave it for 24 hours , scratch it and spray water for one day.
2- Apply final coat and smooth the surface , leave it for 24 hours and spray water for 2 days.
Notes:
- It brown coat more than15 mm apply it on layers and if more than 30 mm add a galvanized metal lath.
- Use mortar in one hour only.
- Do not reuse falling mortar unless the surface is clean and in a period of less than half an hour.
- In construction joints of plaster stop plastering in a horizontal and vertical straight lines and with rough inclined edges – and when continue, clean, rough, spray water and add (roba) to the joints. 11

12. Special kinds of Plaster
Granulate: الجرانوليت
A special layer of plaster composed of aggregates, cement, sand and glue applied on surfaces after basic layers.
It has many advantages and could have many shapes by using aluminum for forming the shapes.
Marmarina:المرمرينا ( السمسمية )
A decorative final layer applied of typical plastering layers and has many advantages in water proofing and decoration.
Composed of ground marble, acrylic materials, glue and other additions.
Surfaces should be painted with Pendrol before applying Marmarina.
Apply the whole surface continuously without making joints. 12

13. Special kinds of Plaster
Lime Plastering: قصارة الجير
A plaster used in internal surfaces
Same layers of internal plaster except final coat
Final coat is composed of: Lime, cement and fine sand
Gives more leveled surface
Have some advantages and disadvantages 13

16. Defects in Plastering
الامور الواجب مراعاتها وفحصها عند قبول استلام القصارة:
التموج
التطبيل
التشققات:
سطحية ودقيقة
غائرة
اختلاف اللون
بقع الصدأ
عدم استواء الأسطح والزوايا والحواف
ملاحظة: تناقش اسباب كل من تلك العيوب وطرق فحصها ووسائل علاجها 16

17. Quantity Surveying of plaster
طرق الكيل في القصارة:
تكال القصارة بالمتر المربع وتحسب الزوايا والحواف بالمتر الطولي وخاصة في الكيل البلدي
الكيل البلدي
الكيل الهندسي 17