1. How to make a Miners Lantern

2. Developed as part of… SURVIVNG STAVELEY

3. What you will need… 2 litre pop bottle Cardboard (e.g. cereal packet) Kitchen Foil Tape Wire LED Light And to draw around… A Saucer 2p Coin

4. Cut a hole large enough to fit your LED light through.

5. Cover all 4 sticks with foil

6. Spread the sticks equally around the bottle and secure using tape

7. Cut cardboard wide enough to cover ½ the bottle and long enough to wrap around

8. Use a 2p coin to draw four semi- circles along one side. Cut them out.

9. Cover the cardboard in foil. Secure with tape where needed.

10. With the cut outs to the top tape the card to the bottle, wrap & stick.

11. Find a plate a bit bigger than your bottle

12. Draw around it on cardboard and cut it out

13. Cover with foil and tape securely to bottom of bottle

14. Cut a piece of cardboard 2” deep and long enough to wrap around the bottle

15. Cover with foil. Tape around bottom

16. Wrap wire around the neck and make a loop. Secure with plenty of tape

17. Cut out a second circle. From the centre to the edge cut along the dotted line

18. Make a slight cone and secure with tape

19. Flatten the cone and cut off the nose

20. Cover the lid in foil and remake the hole

21. Put the lid on. Put LED light inside and switch on!

22. Funded by… Images © Growth Activities ltd 2013