1. The C-A-T TM is Delivered in Its One-Handed Configuration Free-running end of the Self-Adhering Band passed through the buckle forming a loop for the arm to pass through. This is the recommended carrying configuration. Combat Application Tourniquet TM (Pat. Pending)

2. The Combat Application Tourniquet TM (C-A-T TM ) (Patent Pending) is a small and lightweight one-handed tourniquet that completely occludes arterial blood flow in an extremity. The C-A-T TM uses a Self-Adhering Band and a Friction Adaptor Buckle to fit a wide range of extremities combined with a one-handed windlass system. The windlass uses a free moving internal band to provide true circumferential pressure to an extremity. The windlass is then locked in place; this requires only one hand, with the Windlass Clip TM. The C-A-T TM also has a Hook-and-Loop Windlass Strap TM for further securing of the windlass during patient transport. Anatomy of a C-A-T TM

3. : Step 1: Route the Self-Adhering Band Around the Leg And pass the free-running end of the band through the inside slit of the friction adaptor buckle. Two-Handed Application to a Leg

4. : Step 2: Pass the Band Through the Outside Slit of the Buckle Utilizing the Friction Adaptor Buckle which will lock the band in place. Two-Handed Application to a Leg

5. : Step 3: Pull the Self-Adhering Band Tight And securely fasten the band back on itself. Two-Handed Application to a Leg

6. : Step 4: Twist the Rod Until bright red bleeding has stopped Two-Handed Application to a Leg

7. : Step 5: Lock the Rod in Place With the Windlass Clip TM Two-Handed Application to a Leg

8. Hemorrhaging is Now Controlled. You can attend to other injuries or casualties. Two-Handed Application to a Leg

9. : Step 6: Secure the Rod With the Strap Grasp the Windlass Strap TM, pull it tight, and adhere it to the opposite hook on the Windlass Clip TM Two-Handed Application to a Leg

10. The C-A-T TM Is Ready For Transport Two-Handed Application to a Leg