Download presentation
Presentation is loading. Please wait.
Published byKasey Halbrooks Modified over 9 years ago
1
LAB #5 – LOWER EXTREMITY Range of Motion Case Study #2 Tyler Hyvarinen (0308368) Kelly Heikkila (0305975) Allison Pruys (0310660)
2
CASE STUDY 28 year old student Complete tear of ACL, MCL & Lateral Meniscus Healthy and active and has completed 3 weeks of treatment Has partial flexion and is partially weight bearing with use of crutches The meniscus tear has partially healed and MCL is still weak and needs strengthening GOAL: Develop full range of motion and establish weight bearing function
3
Functional Assessment Exercises Stair assessment Chair exercise
4
Functional Assessment – Test #1 Procedure: The patient will ascend and descend a set of stairs (minimum of three steps) Normal Range: Note that normal Range of Motion for the knee is from 0° of extension to 135° of flexion. The maximum knee flexion needed for this movement is between 83° and 105° to ascend and 86° to 107° to descend the stairs. Contraindications & Substitution/Trick Movements: Although there are movements occurring at the ankle and hip joints, the knee joint undergoes the largest range.
5
Functional Assessment – Test #2 Procedure: Have the patient sit down in a chair. They may use the arm rests if needed. Observe any difficulty they may have Normal Range: The average range needed for sitting in a chair is 117° of flexion Contraindications & Substitution/Trick Movements: Some difficulties the patient may have include ‘dropping’ into the chair (which may be caused by the inability to actively flex knees to the degree needed to sit)
6
Active Range of Motion Assessments (AROM) Knee flexion Knee extension
7
AROM Assessment – Knee Flexion Procedure: The patient is lying in a prone position with a pillow under the abdomen. The knee is in extension, the tibia is in a neutral position and the foot is over the end of the table. A pelvic strap is applied to stabilize the hips around the gluteal muscles and the therapist stabilizes the thigh with his/her hand over the distal hamstrings The patient flexes his/her knee through full range of motion. AROM is visually assessed or measured using a universal goniometer. Contraindications & Substitution/Trick Movements: The rectus femoris may limit the range of knee flexion in the prone position Substitution movements may occur at the sartorius (producing hip flexion and external rotation) and the gracilis (producing hip abduction)
8
AROM Knee Flexion Con’t Musculature: Semimembranosus Semitendinosus Biceps Femoris Ligaments: ACL – minimum tension at about 40-60° flexion MCL – greatest tension in anterior portion during knee flexion Normal Range: Normal AROM at the knee is from 0° extension to 135° flexion
9
AROM Assessment – Knee Extension Procedure: Patient is instructed to sit on a table, with legs suspended, grasping the edge of the table for support. The non-test foot should be supported on a stool. The therapist explains, demonstrates or passively moves the limb though knee extension then instructs the patient to straighten the knee as far as possible. The patient is instructed to maintain the thigh in the start position or the therapist may stabilize the thigh with his/her hand. The patient performs knee extension. The knee is extended as far as possible through the range of motion. AROM is visually assessed or measured with a universal goniometer. Contraindications & Substitution/Trick Movements: Tight hamstrings may restrict knee extension in this position. As a trick/substitution movement, the patient may lean back to posteriorly tilt the pelvis and extend the hip joint.
10
AROM Knee Extension Con’t Musculature: Vastus Medialis Vastus Lateralis Vastus Intermedius Rectus Femoris Ligaments: ACL – greatest tension in knee extension MCL – greatest tension in posterior portion Normal Range: Normal AROM at the knee is from 0° extension to 135° flexion
11
Passive Range of Motion Assessments (PROM) Knee flexion/extension Measurement of muscle length (rectus femoris) Tibial rotation Knee flexion
12
PROM Assessment – Knee Flexion/Extension Start position Patient is lying supine with leg extended and a towel under the distal thigh. Stabilization The pelvis is stabilized by the weight of the femur, as the therapist grabs the distal tibia/fibula. Therapist hand placement The therapist applies slight pressure and moves the leg to flex the hip and knee. Slight pressure is applied at the limit of knee flexion. End Position The therapist then pulls slightly to extend the knee applying alight pressure at full extension. End Feel at flexion the end feel will be firm/soft. at extension the end feel will be firm.
13
PROM Knee Flexion/Extension Con’t Measurement: The axis of the goniometer is placed over the lateral epicondyle of the femur The stationary arm is placed parallel to the longitudinal axis of the femur, pointing toward the greater trochanter The moveable arm is placed parallel to the longitudinal axis of the fibula, pointing toward the lateral malleolus Measurements are taken at point of maximum flexion and at point of maximal hyperextension (0-10 degrees)
14
PROM Assessment – Measurement Of Muscle Length (Rectus Femoris) Start Position: The patient is prone. A towel is placed under the thigh to eliminate pressure on the patella. The leg is in the anatomical position with the knee in extension (0°) Stabilization: The therapist stabilizes the femur End Position: The lower leg is moved in a posterior direction so that the heel approximates the buttock to the limit of knee flexion. Passive insufficiency of rectus femoris may restrict the range of knee flexion when the patient is prone End Feel: Rectus femoris on stretch – firm end feel Substitution/Trick Movement: The patient anteriorly tilts the pelvis and flexes the hip to place the rectus femoris on slack and thus allow increased knee flexion.
15
PROM– Measurement Of Muscle Length (Rectus Femoris) Con’t Measurement: The axis of the goniometer is placed over the lateral epicondyle of the femur The stationary arm is placed parallel to the longitudinal axis of the femur, pointing toward the greater trochanter The moveable arm is placed parallel to the longitudinal axis of the fibula, pointing toward the lateral malleolus Measurement is taken at point of maximal flexion
16
PROM Assessment – Tibial Rotation Start Position: The patient is sitting with the knee 90° flexion, hanging over the side of the table. A towel is placed under the distal thigh to maintain the thigh in a horizontal position. Stabilization: The therapist stabilizes the femur End Position: The tibia starts in full internal rotation and is then rotated by the therapist to the full available range for external rotation. The total range is the tibia is recorded as excessive, normal or restricted (average is 58°). End Feel: Internal rotation and external rotation – firm.
17
PROM Assessment – Tibial Rotation Con’t Measurement: The strap is placed around the leg, distal to the gastrocnemius muscle The dial is placed on the right angle extension plate on the anterior aspect of the leg
18
PROM (against gravity) – Knee Flexion Start position Patient is lying in the prone position with a pillow under the abdomen. The knee is in extension with the tibia in the neutral position, and the foot is over the end of the table. Stabilization A strap is placed around the pelvis, the therapist stabilizes the thigh. Movement The patient flexes the knee through the full rang of motion. Trick Movements Sartorius – Producing hip flexion and external rotation. Gracilis – Producing hip adduction.
19
PROM (against gravity) – Knee Flexion Con’t Measurement: The axis of the goniometer is placed over the lateral epicondyle of the femur The stationary arm is placed parallel to the longitudinal axis of the femur, pointing toward the greater trochanter The moveable arm is placed parallel to the longitudinal axis of the fibula, pointing toward the lateral malleolus The leg is moved though full flexion and a measurement is taken at the point of full flexion.
Similar presentations
© 2024 SlidePlayer.com. Inc.
All rights reserved.