1. SFFMA Training Objectives: 27-01.01 – 27-01.06
CVFD Training – SCBA
SFFMA Training Objectives: –

2. Objectives (1 of 2)
List two conditions requiring respiratory protection.
List and explain the effects of oxygen deficiency and toxic gases on the human body.
List one legal requirement for use of SCBA.
List two types of SCBA.
List four components of the SCBA used by the authority having jurisdiction.

3. Objectives (2 of 2) Demonstrate two different SCBA donning procedures.
Demonstrate routine inspection of SCBA.
Demonstrate after-use maintenance and servicing.
Demonstrate the servicing of an SCBA cylinder with the air-filling system.

4. Introduction (1 of 3) SCBA an important item of PPE.
SCBA allows firefighters to work in oxygen deficient atmospheres.
Human body very vulnerable to oxygen deficient atmosphere.
Respiratory protection policy must exist.
SCBA required in an IDLH area.
Click Here to View Video: SCBA Functions

5. Introduction (2 of 3) Many changes in SCBAs since the 1970s
Decrease in weight
Must be positive pressure
Improved design
SCBA maintenance programs
PASS devices
Better training programs
Increased regulations

6. Introduction (3 of 3) Improvements
Technology
Regulations
Mandates
SCBA improvements are only as effective as the training and proficiency firefighters develop in using SCBA.

7. Conditions Requiring Respiratory Protection
Oxygen deficiency
High temperatures
Smoke
Unburned products of combustion
Toxic environment

8. Oxygen-Deficient Environments
Humans and fire both require oxygen to survive.
Oxygen deficiency is detrimental to the human body.
Click Here to View Video: Proper Use of SCBA/ Effects of Smoke and Fire
Click Here to View Video: SCBA Standards, Types and Limitations

9. Elevated Temperatures and Smoke
Inhalation of heated gases can cause fluid to build up in the lungs and create long-term, irreversible damage.
Combustion by-products are very irritating to the body.
High temperatures can also cause severe burns to the respiratory system.

10. PPE for Oxygen-Deficient Environment

11. Effects of Toxic Gases and Environments (1 of 2)
Toxic gases are produced by combustion.
These gases affect various body systems.
Hazardous materials can increase the risk to firefighters.
CO is one of the most lethal gases produced by fire.
CO attaches to blood 218 times easier than O2.

12. Effects of Toxic Gases and Environments (2 of 2)
CO prevents distribution of O2 in the body, causing hypoxia.
Without SCBA, a firefighter will not survive.
Repeated exposure to toxins has long-term effects.

13. Legal Requirements for SCBA
OSHA - Respiratory Protection Standard Title 29 CFR
29 CFR standard for all entries into IDLH atmospheres
NFPA standards (1500, 1404, 1981)
NIOSH 42 CFR Part 84

14. Organizations Concerned with SCBA Design and Use
STANDARD
APPLICATION
National Institute for Occupational Safety & Health (NIOSH)
42 CFR Part 84
Requirements for design, testing, certifying SCBA
Occupational Safety & Health Administration (OSHA)
29 CFR
Respiratory protection programs for SCBA use
Occupational Safety & Health Administration
29 CFR
Fire Brigade Standard, references
National Fire Protection Association
NFPA 1404
Standard for Fire Department SCBA Program
NFPA 1500
Standard on Fire Department Occupational Safety & Health Program
NFPA 1981
Standard on Open-Circuit SCBA for the Fire Service

15. Limitations of SCBA (1 of 2)
SCBA design and size
Increases weight and girth
Decreases mobility
Requires good physical conditioning
Must be aware of how long air will last
Limits visibility
Voice muffled and hard to understand

16. Limitations of SCBA (2 of 2)
Limitations of SCBA user
Factors such as facial hair or weight loss can alter mask effectiveness.
Lack of confidence can lead to anxiety.
Training/experience will improve confidence and ability.
Increased physical stress causes anxiety.
Emotional state may affect respiratory rate and air consumption.

17. Constant Training Is Essential
Click Here to View Video: SCBA in Emergency Situations

18. Physically Demanding Tasks

19. Two types of SCBA in use Open-circuit SCBA Closed-circuit SCBA
Both built according to NIOSH and NFPA standards

20. Open-Circuit SCBA (1 of 2)

21. Open-Circuit SCBA (2 of 2)
SCBA has four assembly components.
Backpack and harness
Cylinder
Regulator
Face piece assembly

22. SCBA Harness Assembly

23. Open-Circuit SCBA — Cylinders (1 of 2)
SCBA cylinders vary in material and type.
USDOT regulates compressed gas cylinders.
Quality of the compressed breathing gas has a direct effect on the performance of the SCBA.

24. Open-Circuit SCBA — Cylinders (2 of 2)
SCBA Air Cylinder Capacities
RATED DURATION (MINUTES)
MATERIAL
CYLINDER PRESSURE (PSI)
CAPACITY COMPRESSED AIR (FT3) 30
Aluminum or Composite
2,216 44
4,500 45
Carbon Fiber
3,000 65 60 88

25. SCBA Regulator (1 of 2)
Regulator is attached to the face piece or waist strap.
Regulator has a pressure gauge.
Regulator is activated by user’s breathing action.

26. SCBA Regulator (2 of 2)
The regulator maintains constant positive pressure airflow to the face piece.
Units have low air supply warning alarm.
NFPA 1981 requires two types of alarms.

27. SCBA Face Pieces Annual face piece fit test is required.
Exhalation valve keeps toxic gases out.

28. Closed-Circuit SCBA Not used for regular firefighting operations
Commonly used for hazmat operations and below-grade rescues
Contains cylinder, filter system, regulator, and valves

29. Open-Circuit Supplied Air Respirator (SAR)
Air supply cylinder is remote from user.
It provides user with long- duration air supply.
It is used for hazmat operations and confined space rescues.

30. Donning and Doffing SCBA (1 of 2)
Perform safety check first.
Use one of two methods.
Over the head method
Coat method
SCBA is also mounted in seats.
Never stand to don while apparatus is moving.
After securing SCBA, don face piece.
Click Here to View Video: SCBA Testing and Service/ Donning SCBA

31. Donning and Doffing SCBA (2 of 2)
The proper donning of a face piece is essential.
After exiting hazardous area, remove SCBA. Remove face piece while waiting for assignment.
Local protocol may require rehab after assignment.

32. Over the Head Method

33. Coat Method

34. Seat-Mounted SCBA

35. SCBA Operation and Emergency Procedures
Firefighters must be proficient in:
Safe use of SCBA
Donning and doffing procedures
Individual limitations
Limitations of SCBA

36. Safe Use of SCBA (1 of 2)
Firefighters must be physically fit for respirator use.
Accountability system should be in place.
Must work in teams of two at a minimum.
OSHA “two in/two out” regulation.
PASS device must be activated.

37. Safe Use of SCBA (2 of 2) SCBA operations should include rehab time.
Stay hydrated during rehab.
Air consumption will vary for all.
Never remove the face piece in a contaminated environment.
Low air alarm on one team member means the whole team exits.

38. PASS Devices

39. Operating in a Hostile Environment (1 of 2)
Always check in/out with accountability officer.
Always remain low.
Check the environment.
Never remove a face piece.
Be aware of your location at all times.

40. Operating in a Hostile Environment (2 of 2)
Ventilate as you advance.
Check outside openings.
Maintain contact with team members.
Never enter a hostile environment alone.

41. Restricted Openings Never remove face piece!
Loosen straps and rotate SCBA under arm.
Remove harness and hold SCBA as a last resort.
Do not lose contact with SCBA.
Maintain control of unit.
Practice procedures regularly.

42. SCBA Use in Restricted Openings

43. Emergency Procedures with SCBA
Remain calm.
Immediately exit hazardous area.
Activate PASS device.
Announce your emergency over the radio.
If regulator or face piece fails, use bypass valve.
Buddy breathing is only a last resort.

44. Inspection and Maintenance of SCBA
Have SCBA ready to go at all times.
Routinely inspect SCBA.
Remove unit and check it after each use.
Monthly operational check should be done.
Service less than full cylinder.

45. Servicing SCBA Cylinders
Test and certify air source.
Cylinders must have current hydrostatic test date.
Fill stations must have fragmentation containment devices.
Always follow manufacturer’s recommendations.
Remember, fill rates will vary.

46. Fragmentation Containment Device

47. Summary SCBA is one of the most important PPE items.
Both SCBA and the user have limitations.
Firefighters must be familiar and comfortable with use of SCBA.
Firefighters need to be proficient in the proper and rapid donning of SCBA
Routine inspections and maintenance are important.