1. Liew Yong Seong B.Eng (Hons.), M.Eng, MIES, MSSS 1 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

2.  Mr. Liew Yong Seong graduated with a Bachelor and Master Degree in Structural Engineering. He is currently the technical director of Advance Contech (S) Pte. Ltd. He supports and trains clients from local and international consulting and construction firms in using advanced engineering software solutions to streamline design and construction processes of high-rise, reinforced concrete and steel structures with or without post- tensioning and precast components. Over the years of support and training, he has assisted many engineers in solving and fixing modelling and design problems. He is also currently the Regional Representative of prestigious engineering software developers, Forum8 (Japan), RISA Technology (USA) and SE CAD Software -- the world first integrated Analysis, Design and Detailing System for Precast Building Structures. 2 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

3.  0900-1000 Registration / Breakfast  1000-1030 Introduction by Innovacia  1030-1230 Background/Designing PC Project using SE CAD/Examples [2 hours]  1230-0200 Lunch Break  0200-0300 (cont'd) [1 hour]  0300-0430 Detailing using TiffinCAD / IBS Score using TiffinTOOLS-IBS [1.5 hours]  0430 Tea/End 3 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

4.  Introduction to SE CAD  Features and Strength of SE CAD  SE CAD Modules Overview  PMCAD : Model Building  SATWE : Finite Element Analysis and Design  Cages and Precast Component Detailing ◦ Slab, Beam, Column, Wall  Q&A 4 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

5. 5 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

6. Introduction to SE CAD : History streamline construction processes to meet the challenges ahead with the use of advanced technologies 6 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

7. In-situ RC construction  Dependent of foreign labors  Slow and weather dependent  Wastage of materials  Difficult quality control  Environmental issue  Non-systematic and messy >> Solution : use of prefabrication (precast) technology! 7 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

8. Use of conventional software and structural system hinder the use of prefab and precast technology  Does Not promote standardization  Error prone  Difficult to check and archive data 8 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

9. Conventional RC design and detailing : The designers and checkers night mare!  Tonnes of drawings to be drawn, checked and archived 9 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

10. Develop an integrated analysis, design and detailing software to ride on HDB prefabricated building system databases and standard detailings to automate drawings 10 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

11. Why SE CAD? Cost saving Reduction in manpower per project 11 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

12. Why SE CAD? Proven 12 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

13. Why SE CAD? 13 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

14. 14 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

15.  Industrial Precast Building ◦ Factories, Warehouses, Plants etc. ◦ Mainly Function-oriented ◦ Long/Ultra-long spans ◦ Corbels ◦ Pre-stressed T-beam, double-T etc. (simply supported, semi-rigid connection) ◦ Proprietary connector  Residential Precast Building ◦ HDB flats, quarters, schools, offices ◦ Function-and-aesthetic-oriented ◦ Short/Mid spans SE CAD 15 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

16.  Low-rise (bungalow) to high-rise (50 or more stories)  Beam of short to medium span length (4 ~ 8 meters)  Floor : Beam-Slab system  Lateral resistance to wind provided by shear walls + columns & beam-column frame stiffness  Full or hybrid system of in-situ and precast 16 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

17. Residential Precast Building 17 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

18. Building Precast System 18 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

19. 19 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

20. PMCAD PMCAD SATWE SATWE SWALL SWALL PILECAP PILECAP QUANTITY QUANTITY 20 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

21. 21 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

22. Create Model Convert to Precast Fine tuning & checking Modeling in PMCAD Analysis settings Running analysis and design Evaluating building performance Analysis using SATWE Slab design and detailing Beam design and detailing Column design and detailing Wall design and detailing Pile foundation layout Quantity Take-off Design & Detailing with PMCAD, SATWE, SWALL and PILECAP 22 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

23. 23 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

24. PMCAD-1, PMCAD-2, PMCAD-3 24 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

25. 25 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

26. Root LevelLevel 1Level 2 26 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

27. Establish Grid Lines Assign Beams, Walls, Columns Apply Loadings Assembling Floors 27 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

28. Table Analogy Beam/Slab Column/Wall Grid Lines 28 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

29. Demo AutoCAD-like commands, but more advanced 29 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

30. B E A M Analysis : Arbitrary Shape Design : Rectangular Demo 30 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

31. W A L L Analysis : Arbitrary Shape Design : Arbitrary Shape Demo 31 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

32. C O L U M N Analysis : Arbitrary Shape Design : Rectangular, L- & T- Demo 32 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

33. Use Global Floor Load to safe-guard modeling error 33 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

34. Point, Line, Trapezoidal Loads 34 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

35. Point, Line Loads 35 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

36. Point, Line, Trapezoidal Loads Demo 36 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

37.  Typical Floor Concept ◦ Rapid modification, speedy checking  Multiple Floor Edit / Copy  Assemble Floor  Import Project ◦ Parallel workflow (for large team) 37 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

38. Roof top (2.8m) Void deck (3.6m) N x Dwellings (2.8m) Foundation (2.8m) Typical 4 Typical 3 Typical 2 Typical 1 Demo : Duplicate & Modify Typical Floors 38 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

39.  Changes are inevitable in structural modelling  Easy to handle modification across typical floors Demo 39 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

40. 40 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

41. Base Unit + Import Unit = Block BLOCK 1 A A A A A E D D CC C C B B BLOCK 2 E C C C C B B D D A A A A A Demo 41 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

42. Cantilever slab Slab openingSlab dropSlab thickness Convert in-situ to precast slab 42 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

43. 43 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

44. 44 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

45. Precast slab plank Demo 45 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

46. Adjust Dead Load on Slab Adjust Live Load on Slab Adjust Loading Distribution 46 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

47. 47 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

48. Demo 48 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

49.  Check, Draw and Verify Demo 49 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

50. divide and conquer 50 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

51. Create Model Convert to Precast Fine tuning & checking Modeling in PMCAD Analysis settings Running analysis and design Evaluating building performance Analysis using SATWE Slab design and detailing Beam design and detailing Column design and detailing Wall design and detailing Pile foundation layout Quantity Take-off Design & Detailing with PMCAD, SATWE, SWALL and PILECAP 51 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

52. Populate and check data files Column effective length Beam and column hinges, rigid vs. flexible diaphragms General analysis setting 52 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

53. Many interesting stuffs under the hood, especially if your are analyzing and designing high-rise buildings! 53 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

54. Source: Advance Contech technical note on high rise building design and analysis 54 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

55. A feature that most 3D finite element structural design software lack or cannot properly perform! 55 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

56. 56 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

57. 57 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

58. Demo 58 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

59. an art more than a science 59 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

60. Create Model Convert to Precast Fine tuning & checking Modeling in PMCAD Analysis settings Running analysis and design Evaluating building performance Analysis using SATWE Slab design and detailing Beam design and detailing Column design and detailing Wall design and detailing Pile foundation layout Quantity Take-off Design & Detailing with PMCAD, SATWE, SWALL and PILECAP 60 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

61. BeamColumn Pile Layout SlabWall 61 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

62. Structural Steel  Better standardization  Steel Database  Universal Naming Convention  Efficient Reference, Design, Checking, and Logistics 62 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

63. BEAM CAGE CODE J/U/P 2 3 6 1V Cage series Width of Beam Depth of Beam Ref. No. or Ref. No. with alphabet indicating type of stirrups Ref. No. indicating type of main reinf. Suffix 63 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

64. Demo : Beam, Column Detailing 64 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

65. Demo 65 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

66. RC, Shear Wall & Shear Column using Deep Beam Theory Demo 66 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

67. Precast Pile Bored Pile Micro Pile Steel Pile Demo 67 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

68.  Reinforcement Weight  Concrete Volume Demo 68 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

69. 69 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

70.  www.secad-software.com 70 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved

71. 71 28 Dec 2011 © 2011 SE CAD Software. All Rights Reserved