1. PRINTER CONFIGURATION
GUIDE
Scangle SGT-C2008 thermal printer

2. A. Scangle SGT-C2008 thermal printer USB Port installation
B. Scangle SGT-C2008 thermal printer USB Port configuration
C. To print test page.
D. Configure the printer in the POS system

3. A. Scangle SGT-C2008 thermal printer USB Port installation
Step 1. Double click
SGT-C2008 Driver.exe
Step 2. Click Next

4. Step 3. Click I accept the agreement
Step 4. Click Install.

5. Step 5. Click the Large button.
Step 6. Click continue

6. Step 7. Select Windows XP.
Step 8. Click Next.

7. Step 9. Click OK.
Step 12. Click Finish.

8. B. Scangle SGT-C2008 thermal printer USB Port configuration
Step 1. Click Start.
Step 2. Click Printers and Faxes.

9. Step 3. Right click POS80 printer
Step 3. Click properties.

10. Step 4. Click Ports.
Note : To check if the printer is properly printing click this button Print Test Page.
Step 5. Pull down the ports.
Step 6. Click check the USB001.
Step 7. Click Apply.

11. C. To print test page. Step 8. Click OK.
Step 9. Click Print Test Page.
Note : To check if the printer is properly printing click this button Print Test Page.

12. D. Configure the printer in the POS system
Step 1. At the cashier window. Click System setup.
Step 2. Input the admin/supervisor user name and password.
Step 3. Click OK.

13. Step 4. Click Printing.
Step 5. At the System Printer select Epson.

14. Step 6. At the System Printer Name select POS80.
Step 7. Click Save. Then Click OK. You can now use the printer.

15. THANK YOU!
Date created :