Download presentation
Published bySalma Blackham Modified over 9 years ago
1
Manufacturing Processes Lab I, MET 1321 Welding Symbol
Ok. Lets get started. My name is Dr Simin Nasseri, a faculty member here at MET and I am going to teach this course MET ????, Course name. Manufacturing Processes Lab 1 (MET 1321) Prof Simin Nasseri
2
Weld Symbols A basic welding symbol...
...has a reference line, a leader line, an arrow, an optional tail, and welding information. reference line - the starting place for the welding symbol. The specifications for how the weld is to be made will be based on the positioning of the other components compared to the reference line. leader line - takes us to the arrow and can have a special use which will be discussed later. arrow - points to the joint where the weld should be made. tail - the tail is optional and is where you can place information that has no designated place on the welding symbol. Manufacturing Processes Lab 1 (MET 1321) Prof Simin Nasseri
3
Weld Symbols The side of the joint that the arrow points to is called the arrow side. The opposite side of that joint is called the other side. Specs for opposite side Arrow side Specs for arrow side Opposite side Manufacturing Processes Lab 1 (MET 1321) Prof Simin Nasseri
4
Weld Symbols Manufacturing Processes Lab 1 (MET 1321)
Prof Simin Nasseri
5
Weld Symbols Symbol fit up weld Arrow side Arrow side and
Opposite side Symbol fit up weld Manufacturing Processes Lab 1 (MET 1321) Prof Simin Nasseri
6
Fillet Weld The fillet weld is used to make lap joints, corner joints, and T joints. Copyright: Manufacturing Processes Lab 1 (MET 1321) Prof Simin Nasseri
7
Fillet Weld For opposite side For the same side Equal legs
Unequal legs Manufacturing Processes Lab 1 (MET 1321) Prof Simin Nasseri
8
Fillet Weld Manufacturing Processes Lab 1 (MET 1321)
Prof Simin Nasseri
9
Groove weld Commonly used to make edge-to-edge joints:
Square groove joint The V-groove weld Manufacturing Processes Lab 1 (MET 1321) Prof Simin Nasseri
10
Groove weld The bevel groove weld The J-groove weld
Manufacturing Processes Lab 1 (MET 1321) Prof Simin Nasseri
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.