Presentation is loading. Please wait.

Presentation is loading. Please wait.

Utdallas.edu/~metin 1 Estimating and Reducing Labor Costs Chapter 4.

Published byQuintin Deeds Modified over 9 years ago

Similar presentations

Presentation on theme: "Utdallas.edu/~metin 1 Estimating and Reducing Labor Costs Chapter 4."— Presentation transcript:

1 utdallas.edu/~metin 1 Estimating and Reducing Labor Costs Chapter 4

2 utdallas.edu/~metin 2 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Final Assembler’s cost Including Tier 1 Costs Including Tier 2 Costs Rolled-up Costs over ~ 5 Tiers Purchased parts and assemblies Parts and material costs Material costs Logistics costs Assembly and other Labor costs Quality Warranty Overhead Other While labor costs appear small at first, they are important - look relative to value added - role up costs throughout the value chain Implications - also hunt for pennies (e.g. line balancing) - spread operational excellence through the value chain The Role of Labor Costs in Manufacturing: The Auto Industry

3 utdallas.edu/~metin 3 Scooter Mania

4 utdallas.edu/~metin 4 Scooters by Xootr, Stafford, PA www.xootr.com/xootr/tour/nfactorytour.htm 3 main processes: All labor-paced. 1. Steer and fork assembly 2. Frame wheel assembly 3. Deck assembly ComponentsFinished Xootrs Steer assembly Frame assembly Deck assembly

5 utdallas.edu/~metin 5 Xootr Roma sold at $200 0 200 400 600 800 1000 1200 1400 March April May June July August September October November December January Weekly demand

6 utdallas.edu/~metin 6 Utilizations with demand of 125 units/week Worker 1Worker 2Worker 3 Activity time 13 min/unit11 min/unit8 min/unit Capacity 60/13= 4.61 units/hour 60/11= 5.45 units/hour 60/8= 7.5 units/hour Process capacity Min{4.61, 5.45, 7.50}= 4.61 units/hour Demand 125 units/week = 125/35 = 3.57 units/hour Thruput=Min{4.61,3.57}=3.57 units/hour, demand-constrained system Cycle time (requested) (1/3.57) x 60= 16.8 min/unit Cycle time (designed) (1/4.61) x 60= 13 min/unit Idle time/unit 16.8-13= 3.8 min/unit 16.8-11= 5.8 min/unit 16.8-8= 8.8 min/unit Utilization 3.57/4.61=13/16.8= 77% 3.57/5.45=11/16.8= 65.5% 3.57/7.5=8/16.8= 47.6%

7 utdallas.edu/~metin 7 Let us generalize: Cycle Time: Time to process 1 unit OT: Operating time per week D: Demand per week Requested Cycle Time = RCT = OT / D Designed Cycle Time = DCT = 1 / Process capacity If RCT > DCT, then we can produce at the requested level. Design is feasible. If RCT < DCT, then we canNOT produce at the requested level. Design is infeasible. Capacity must be expanded. Example: If a student can answer a multiple choice question in 2 minutes but gets a test with 30 questions and is given only 30 minutes then OT=30 minutes; D=30 Desired cycle time = 1 minute < < 2 minutes = Cycle time from the process (design) capability

8 utdallas.edu/~metin 8 a1a1 Activity Time a2a2 a3a3 DCT=a 4 1234 =Idle Time Capacity i = Utilization i = Overall Performance Measures Direct Labor Content=a 1 +a 2 +a 3 +a 4 If one worker per resource: Direct Idle Time = (RCT-a 1 ) +(RCT-a 2 ) + (RCT-a 3 ) +(RCT-a 4 ) Average labor utilization Labor Productivity Measures Let us generalize: Labor Productivity Measures for a Demand-Constrained System: RCT > DCT RCT

9 utdallas.edu/~metin 9 Time to make X units = Time through empty system + = Time through empty system + - For continuous flow processes: “(X-1)=X” Time to complete X units starting with an empty system Example: How many minutes are required to make 100 ? 13+11+8=32 mins required for the first scooter (99)(13)=1287 mins required for the remaining 99 units

10 utdallas.edu/~metin 10 Utilizations with demand of 125 units/week Worker 1Worker 2Worker 3 Utilization 77%65.5%47.6% u No worker is fully utilized at the demand of 125 units/week. u There is an imbalance in the amount of work done by workers. u Upon balancing the assembly line, the process capacity improves. u But the thruput does not change as the line is demand constrained.

11 utdallas.edu/~metin 11 Utilizations with demand of 200 units/week Worker 1Worker 2Worker 3 Activity time 13 min/unit11 min/unit8 min/unit Capacity 60/13= 4.61 units/hour 60/11= 5.45 units/hour 60/8= 7.5 units/hour Process capacity Min{4.61, 5.45, 7.50}= 4.61 units/hour Demand 200 units/week = 5.714 units/hour Thruput=Min{4.61,5.714}=5.714 units/hour, capacity-constrained system Cycle time (requested) (1/5.714) x 60= 10.5 min/unit Cycle time (designed) (1/4.61) x 60= 13 min/unit Idle time/unit 13-13= 0 min/unit 13-11= 2 min/unit 13-8= 5 min/unit Utilization 4.61/4.61=13/13= 100% 4.61/5.45=11/13= 84.6% 4.61/7.5=8/13= 61.5%

12 utdallas.edu/~metin 12 a1a1 Activity Time a2a2 a3a3 DCT=a 4 1234 Bottleneck =Idle Time If one worker per resource: Direct Idle Time=(DCT-a 4 )+(DCT-a 1 ) +(DCT-a 2 ) +(DCT-a 3 ) Labor Productivity Measures Labor Productivity Measures for a Capacity-Constrained System: RCT < DCT Since the system is capacity-constrained, line balancing can improve the capacity.

13 utdallas.edu/~metin 13 Balancing an Assembly Line without Resequencing Operations 1: Prepare cable 2: Move cable 3: Assemble washer 4: Apply fork, threading cable end 5: Assemble Socket head screws 6: Steer pin nut 7: Brake shoe, spring, pivot bolt 8: Insert front wheel 9: Insert axle bolt 10: Tighten axle bolt 11: Tighten brake pivot bolt 12: Assemble handle-cap 13: Assemble brake lever + cable 14: Trim and cap cable 15: Place first rib 16: Insert axles and cleats 17: Insert rear wheel 18: Place second rib and deck 19: Apply grip tape 20: Insert deck fasteners 21: Inspect and wipe-off 22: Apply decal and sticker 23: Insert in bag 24: Assemble carton 25: Insert Xootr and manual 26: Seal carton 22 SteerFrameDeck SteerFrameDeck Cycle Time Before Line Balancing Cycle Time After Line Balancing 0 100 200 300 400 500 600 700 800 900 Activity time [seconds] 0 100 200 300 400 500 600 700 800 900 Activity time [seconds] 6 1 2 3 4 5 7 8 9 10 12 13 14 15 16 17 18 19 11 20 23 24 26 21 25 1 2 3 4 5 7 8 9 10 6 12 11 13 14 15 17 16 18 19 20 23 26 21 25 24

14 utdallas.edu/~metin 14 Utilizations after Line Balancing with demand of 200 units/week Worker 1Worker 2Worker 3 Activity time 10.383 min/unit10.033 min/unit11.083 min/unit Capacity 60/10.383= 5.78 units/hour 60/10.033= 5.98 units/hour 60/11.083= 5.41 units/hour Process capacity Min{5.78, 5.98, 5.41}= 5.41 units/hour Demand 200 units/week = 5.714 units/hour Thruput=Min{5.41,5.714}=5.41 units/hour, capacity-constrained system Cycle time (requested) (1/5.714) x 60= 10.50 min/unit Cycle time (designed) (1/5.41) x 60= 11.083 min/unit Idle time/unit 11.083-10.383= 0.7 min/unit 11.083-11= 0.083 min/unit 11.083-11.083= 0 min/unit Utilization 10.383/11.083= 93.7% 10.033/11.083= 90.5% 11.083/11.083= 100%

15 utdallas.edu/~metin 15 Demand of 700 units/week after line balancing u With the rate of 5.41/hour, weekly production in 35 hours is about 189.5 units < 700 units. –Capacity constrained system u Capacity expansion options: –Replicate the assembly line –Selectively add workers to the line »Add generalists »Add specialists

16 utdallas.edu/~metin 16 Replicate the assembly line u How many lines do we need? –Roundup(700/189.5)=Roundup(3.69)=4 ComponentsFinished Xootrs Steer assembly Frame assembly Deck assembly Steer assembly Frame assembly Deck assembly Steer assembly Frame assembly Deck assembly Steer assembly Frame assembly Deck assembly

17 utdallas.edu/~metin 17 Selectively add generalists u How many generalists do we need? –Steer assembly: 1 worker provides 35(5.78)=202.3 units »Roundup(700/202.3)=4 needed for Steer assembly –Frame assembly: 1 worker provides 35(5.98)=209.3 »Roundup(700/209.3)=4 needed for Frame assembly –Deck Assembly: 1 worker provide 35(5.41)=189.5 »Roundup(700/189.5)=4 needed for Deck assembly Components Finished Xootrs Steer assembly Frame assembly Deck assembly 4 workers

18 utdallas.edu/~metin 18 Selectively add specialists u How many specialists do we need? –Need 700 units in 2100 (=35x60) minutes or 1 unit in 180 secs. u Group tasks so that total task time is less than or equal to 180 secs. WorkerTaskDuration(secs)Total 1Prepare cable30 Move cable25 Assemble washer100155 2Apply fork66 Assemble socket114180 3Steer pin nut49 Brake shoe, etc.66115 4Insert front wheel100 Insert axle bolt30 Tighten axle bolt43173

19 utdallas.edu/~metin 19 123456 789101112 Selectively add specialists u Completing the table, we observe that 12 workers are needed. 1 4 0 20 40 60 80 100 120 140 160 180 200 123456789101112 Activity time [seconds] Worker 1 2 3 4 5 6 7 8 9 10

20 utdallas.edu/~metin Where do process times / cost estimates quoted by production managers come from? How to make labor related decisions pricing hiring Impact of process design on productivity Line balance Idle time Direct labor content Calculations: Determining resource requirements to support a volume target. Estimating direct labor content. Calculating direct manufacturing cost Adjusting for idle time The Importance of Process DESIGN Mechanics of a worker-paced line Mechanics of a work cell Key-points to remember:

21 utdallas.edu/~metin 21 Summary u Cycle time, requested and designed, Idle time u Capacity-constrained vs. Demand-constrained systems u Line balancing u Line capacity expansion strategies

Download ppt "Utdallas.edu/~metin 1 Estimating and Reducing Labor Costs Chapter 4."

Similar presentations

Months of the year December January November October February

Months of the year December January November October February
Chapter 4 Estimating and Reducing Labor Costs

Chapter 4 Estimating and Reducing Labor Costs
Flow Rate and Capacity Analysis

Flow Rate and Capacity Analysis
Figure 4.1: The Xootr by Novacruz. ComponentsFinished Xootrs Activity 1 Activity 2 Activity 3 Figure 4.3.: Current process layout.

Figure 4.1: The Xootr by Novacruz. ComponentsFinished Xootrs Activity 1 Activity 2 Activity 3 Figure 4.3.: Current process layout.
Slide 1 Matching Supply with Demand: An Introduction to Operations Management Gérard Cachon ChristianTerwiesch All slides in this file are copyrighted.

Slide 1 Matching Supply with Demand: An Introduction to Operations Management Gérard Cachon ChristianTerwiesch All slides in this file are copyrighted.
Chapter 6 Batching & Flow Interruptions Setup Times & EOQ

Chapter 6 Batching & Flow Interruptions Setup Times & EOQ
Chubaka Producciones Presenta :.

Chubaka Producciones Presenta :.
2012 JANUARY Sun Mon Tue Wed Thu Fri Sat

2012 JANUARY Sun Mon Tue Wed Thu Fri Sat
IV. Little’s Law and Labor Costs

IV. Little’s Law and Labor Costs
6 - 1 Chapter 6 Master Budget and Responsibility Accounting.

6 - 1 Chapter 6 Master Budget and Responsibility Accounting.
P Pathophysiology Calendar. SundayMondayTuesdayWednesdayThursdayFridaySaturday 1234567 891011121314 15161718192021 22232425262728 293031 January 2012.

P Pathophysiology Calendar. SundayMondayTuesdayWednesdayThursdayFridaySaturday January 2012.
Chicas, este calendario si es pa' nosotras !!!!!.

Chicas, este calendario si es pa' nosotras !!!!!.
MONDAYTUESDAYWEDNESDAYTHURSDAYFRIDAYSAT/SUN Note: You can print this template to use as a wall calendar. You can also copy the slide for any month to add.

MONDAYTUESDAYWEDNESDAYTHURSDAYFRIDAYSAT/SUN Note: You can print this template to use as a wall calendar. You can also copy the slide for any month to add.
2007-2008 School Year Calendar You can print this template to use it as a wall calendar, or you can copy the page for any month to add it to your own presentation.

School Year Calendar You can print this template to use it as a wall calendar, or you can copy the page for any month to add it to your own presentation.
2007-2008 School Year Calendar You can print this template to use it as a wall calendar, or you can copy the page for any month to add it to your own presentation.

School Year Calendar You can print this template to use it as a wall calendar, or you can copy the page for any month to add it to your own presentation.
2007 Monthly Calendar You can print this template to use it as a wall calendar, or you can copy the page for any month to add it to your own presentation.

2007 Monthly Calendar You can print this template to use it as a wall calendar, or you can copy the page for any month to add it to your own presentation.
You can print this template to use it as a wall calendar, or you can copy the page for any month to add it to your own presentation. If you’d like to change.

You can print this template to use it as a wall calendar, or you can copy the page for any month to add it to your own presentation. If you’d like to change.
You can print this template to use it as a wall calendar, or you can copy the page for any month to add it to your own presentation. If you’d like to change.

You can print this template to use it as a wall calendar, or you can copy the page for any month to add it to your own presentation. If you’d like to change.
13-1 CHAPTER 13 McGraw-Hill/Irwin © 2008 The McGraw-Hill Companies, Inc., All Rights Reserved. Cost Accounting and Reporting Systems.

13-1 CHAPTER 13 McGraw-Hill/Irwin © 2008 The McGraw-Hill Companies, Inc., All Rights Reserved. Cost Accounting and Reporting Systems.
Slide 1 Matching Supply with Demand: An Introduction to Operations Management Gérard Cachon ChristianTerwiesch All slides in this file are copyrighted.

Slide 1 Matching Supply with Demand: An Introduction to Operations Management Gérard Cachon ChristianTerwiesch All slides in this file are copyrighted.

Similar presentations

Ads by Google