1. Laser Enclosure to Elevated Rail Assembly Wyman Gordon Forging Locator Original Revision: 2/14/2013

2. Before & After

3. Step 1: Attach Bolts to Rail Attachment Loosely attach bolts on both sides of elevated rail attachments.

4. Step 2: Attach Elevated Rail to Laser Enclosure Slide the elevated rail from the front of the enclosure bracket to the back by placing the connected nut and bolt into the track on the bracket

5. Step 3: Alignment Align the elevated rail and bracket by positioning the front rail attachment flush to the front of the enclosure bracket

6. Final Step: Tighten Bolts Tighten bolts in the rail attachment to the enclosure bracket to finish assembly