1. used with FILTERS Copyright © 2013 by The S.E.A. Group

2. CHECK: Correct filter(s) Filter(s) correctly fitted Respirator clean, complete, correctly assembled Fit the SR200

3. Loosen the side straps of the head harness. Twist the strap holders forward and pull on the strap. Copyright © 2013 by The S.E.A. Group Fit the SR200

4. Sling the neck strap around your neck Lift the head harness up over the mask and away from your face Place your chin in the chin cup Copyright © 2013 by The S.E.A. Group Fit the SR200

5. Pull the head harness backwards towards your neck Copyright © 2013 by The S.E.A. Group Fit the SR200

6. Tighten the side straps in pairs by pulling the loose ends Copyright © 2013 by The S.E.A. Group Fit the SR200

7. If necessary, adjust the two top straps. Undo buckles and pull loose ends forwards Fasten the buckles Copyright © 2013 by The S.E.A. Group Fit the SR200

8. Loose ends can be hooked to the head harness Copyright © 2013 by The S.E.A. Group Fit the SR200

9. Thank you for watching Copyright © 2013 by The S.E.A. Group