Download presentation
Presentation is loading. Please wait.
Published byEssence Hollands Modified over 10 years ago
3
To design and Construct a Straw Robotic Arm Prepared by LEE HO SING(25) CHAN HO KIU(04) LEUNG CHUN CHEUNG(27) KWONG KAI FUNG(19) (spring2004)
4
Team members and the Supervisor
5
Table of contents 1)Project objectives 2)Method of research 3)Prototype making 4)Analysis of the straw robotic arms 5)Literature and internet reviews 6)Self reflection 7)Knowledge and skill gained
6
Project objectives 1)Learn more about the straw structure and engineering knowledge 2) Learn skills to run technological based project for the further studies
7
Method of research (i)By Brainstorming
8
(ii) By trial and error
10
~ 屢敗屢戰,成功在明天~
11
(iii) By subject expertise
12
(iv) By observation
13
~三人行必有我師~
14
Prototype making
18
Analysis of the straw robot arms in the competition
19
There are some good models below
20
1)http://www.ied.edu.hk/has/phys/mathmechhttp://www.ied.edu.hk/has/phys/mathmech This website highlights the Mathematics for mechanics. 2) http://www.carlos.com.hk/cd_t.htmhttp://www.carlos.com.hk/cd_t.htm This website shows some examples of s traw robotic arms. All of the information are very helpful for us to design the robotic arm. 3) http://data- log.hkedcity.net/physicsc/mechanics/mechanics_main.shtmlhttp://data- log.hkedcity.net/physicsc/mechanics/mechanics_main.shtml The website describes something about the mechanics. Internet and Literature reviews
21
工場幾何三角學 (CHAPTER 1.4, 2.6,3.7) 理論力學與機械原理 (CHAPTER 3.2~3.4,5.1~5.3)
22
Self Reflection Advantages of our prototype 1) good look 2) creative idea 3) proper size Disadvantages of our prototype 1) weak bending strength 2) cannot hold the bottle firmly 3) poor craftsmanship at straw joints
23
Our new design
24
Knowledge and skill gained 1.Know how to share duties for the project 2.Learn more about the engineering material and mechanism 3.Synthesis skills to make a robotic arm 4.Know something about the City University of Hong Kong 5.Apply the PowerPoint techniques to do oral presentation 6.Apply the digital image processing skills for the written report It should be a good opportunity to learn something about the material science and mechanism. The knowledge and skills gained are summarised below :
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.