1. Trimble 2D & 3D Grade Control Systems for Dozers & Graders
Presenters name

2. Trimble GCS for Dozers
Trimble offers the heavy and highway contractor the broadest range of Grade Control Systems in the industry from 2D laser-based to 3D GNSS or Total Station-based.
Trimble systems are rugged, easy to use, fully upgradeable and portable, and flexible enough to meet a wide range of application and jobsite requirements.
Trimble Grade Control Systems with automatic blade control maximizes dozer performance.
Whether grading simple pads and slopes or complex design surfaces and alignments the operator can get to grade at high speeds, without sacrificing grade control accuracy or quality of the final graded surface.

3. Trimble 2D Grade Control Systems for Dozers

4. Trimble GCS900 – 2D Dozer Configurations
Applications
Blade Slope Only
Blade slope control for rough grading
Flat and sloping pads
Single Laser
(Lift only)
Small housing pads, building sites
Tennis courts
Sports fields
Finish grading
Single Laser and Blade Slope
(Lift and tilt)
General site elevation control
Road maintenance
Finish Grading
Dual Laser
(Lift and Tilt)
Medium / Large commercial building sites and housing pads
Road Construction
Golf courses
Material balancing

5. Trimble 2D GCS900 for Dozers
Key System Features:
CB450 or CB460 full color graphical control box
Lift and tilt automatic blade control for controlling both the elevation and slope of the blade
Linked mode operation which ties the lift and tilt functions together for greater speed and accuracy
On-machine components are portable and can be used on other machine types, without software / firmware upgrades
On-machine components are modular and can be added or removed depending upon application
3-5 mm vertical accuracies
Systems are easily upgradeable to 3D

6. Trimble 2D GCS900 Dozer CB460 LR410 1 or 2 VM4XX CB450 PM400 AS400

7. Trimble 3D Grade Control Systems for Dozers

8. Trimble GCS900 – 3D Dozer Configurations
Applications
Single GNSS and Blade Slope
Roads/highways -rough grading
Large earthmoving projects - dams, reclamation, etc.
Landfills/ waste deposits
Commercial/residential site prep - pads, grading for large slabs, etc.
Land reclamation projects
Dual GNSS
Bulk Earthworks
Roads/highways/railways - rough grading
Landfills, waste deposits, projects with steep slopes
Commercial/residential site prep - complex design
Golf course construction
Embankments, retention ponds
Single / Dual GNSS with Laser Augmentation
Roads/highways/railways – fine grading
Airport construction – runways, tarmacs
Commercial/residential site prep - complex designs, slabs, pads
Universal Total Station
Roads/highways/railways – finished grading
Commercial/residential site prep - complex designs
Subdivisions - pads, local infrastructure

9. Trimble 3D GCS900 Dozer SNRx10 PM400 SNM940 - or - MS992 1 or 2 MT900
MS992 SR300
AS400
VM4xx
CB460
CB450
-or-

10. Trimble GCS900 3D GCS For Dozers Off Machine Infrastructure
For the GCS900 2D
AND
For the GCS900 3D with Laser Augmentation
For the GCS900 3D
With GNSS OR
GNSS and Laser Augmentation
With MT900
SPSx30 Universal Total Station
GL700 Grade Laser
GNSS Base Station

11. Trimble 2D & 3D Grade Control Systems for Motor Graders

12. Trimble 2D GCS for Motor Graders
Trimble offers the heavy and highway contractor the broadest range of Grade Control Systems in the industry, from 2D laser or sonic based to 3D GNSS or Total Station based.
Trimble systems are rugged, easy to use, fully upgradeable and portable, and flexible enough to meet a wide range of application and jobsite requirements.
Trimble Grade Control Systems with automatic blade control maximizes motor grader performance.
Whether grading simple pads and slopes or complex design surfaces and alignments the operator can get to grade at high speeds, without sacrificing grade control accuracy or quality of the final graded surface.

13. Trimble 2D Grade Control Systems for Motor Graders

14. Trimble GCS900 - 2D Grader Configurations
Application
Cross Slope - only
Road maintenance
Road construction
Sports fields
Embankments
Road ditches
Single or Dual Laser with Cross Slope
Small-to-large housing and building, pads
Medium/large commercial sites
Material balancing
Highway construction and maintenance
Runways
Single or Dual Sonic with Cross Slope
Single sonic or single laser with cross slope

15. Trimble 2D GCS900 for Graders
Key System Features:
CB450 or 460 full color graphical control – upgradeable to 3D
Simple cross slope-only configurations to combinations of single / dual laser and single / dual sonic tracers
Lift and tilt automatic blade control control for controlling both the elevation and slope of the blade
Angle sensors capable of 100% slopes
Left and right auto/manual and offset switches
On-machine components are portable between machine types, without software / firmware upgrades
On-machine components are modular and can be added or removed depending upon application
3-5 mm vertical accuracies
Systems are easily upgradeable to 3D

16. Trimble 2D GCS900 Grader RS400 SR300 1 or 2 LR410 1 or 2 AS400 x2
ST400 1 or 2
- or -
PM400
VM4xx
CB460
CB450
-or-

17. Trimble 3D Grade Control Systems for Motor Graders

18. Trimble GCS900 - 3D Grader Configurations
Application
Single GNSS and Cross Slope
Roads/highways -rough grading
Large earthmoving projects - dams, reclamation, etc.
Landfills/ waste deposits
Commercial/residential site prep - pads, grading for large slabs, etc.
Land reclamation projects
Dual GNSS
Bulk Earthworks
Roads/highways/railways - rough grading
Landfills, waste deposits, projects with steep slopes
Commercial/residential site prep - complex design
Golf course construction
Embankments, retention ponds

19. Trimble GCS900 - 3D Grader Configurations
Application
Single / Dual GNSS with Laser Augmentation
Roads/highways/railways – fine grading
Airport construction – runways, tarmacs
Commercial/residential site prep - complex designs, slabs, pads
Universal Total Station and Cross Slope
Roads/highways/railways – finished grading
Commercial/residential site prep - complex designs
Subdivisions - pads, local infrastructure

20. Trimble 3D GCS900 for Graders
Key System Features:
CB450 or CB460 full color graphical control box – 2D and 3D capable
On-machine software available in 25 languages, configurable on-the-fly, with a button press
Integrated smart GNSS antenna, cab and blade mountable, quick release mounting for removal
Indicate or automatic blade control configurations
Auto-Sideshift of the motor grader blade supported
Dual GNSS blade mounted solution provides the most versatile grading solution on the market
On-machine components are portable between machine types, without software / firmware upgrades
On-machine components are modular and can be added or removed depending upon applications
Multiple system configurations for fine and finished grade applications , depending upon project requirements – GNSS with Laser Augmentation and Universal Total Station based solutions
Global solutions for two-way data transfer or synchronization of data between machine and office

21. Trimble 3D GCS900 Grader ST400 Optional SNM940 - and / or - RS400
MS992 1 or 2
MT900
AS400 x2
MS992 SR300
- or -
PM400
VM4xx
SNRx10
CB460
CB450
-or-

22. Trimble GCS900 3D GCS For Motor Graders Off Machine Infrastructure
For the GCS900 2D
AND
For the GCS900 3D with Laser Augmentation
For the GCS900 3D
With GNSS OR
GNSS and Laser Augmentation
With MT900
SPSx30 Universal Total Station
GL700 Grade Laser
GNSS Base Station