1. PreCheck in - auto shipment = off

2. We start with the auto shipment set-up. Auto shipment is OFF.

3. PreCheck in - auto shipment = off Stap 1 This is the car we are going to pre check in in the next step.

4. PreCheck in - auto shipment = off Stap 2 As you can see, the car is not marked for auto shipment. Druk op [Tab].

5. PreCheck in - auto shipment = off Stap 3 Now we are going to make the pre check in. Druk op [Tab].

6. PreCheck in - auto shipment = off Stap 4 This is the check in branch as taken from the agreement. BUG: We need a set up to define a default pick up branch. Now we set pick up branch 777 by hand. Klik in het veld.

7. PreCheck in - auto shipment = off Stap 5 Desired situation: When pick up is selected as YES then the default pick up Branch is set as Check in Branch. BUG: We need a set up to define a default pick up branch. Klik op het lijstitem YYes.

8. PreCheck in - auto shipment = off Stap 6 Now we enter the pick up postal code. Question: Is it neede to set a location per postal code in the table? And how does Rentpro deal with more than one Pickup locations on the same postalcode? Druk op [Tab].

9. PreCheck in - auto shipment = off Stap 7 BUG: In the specifications we defined that Rentpro sets the Serving Branch automatically defined on the postal code (and not related to the location). Laat de muisknop los.

10. PreCheck in - auto shipment = off Stap 8 Now we get the selection list ans the right Serving Branch is shown. This one should be set as servering Branch automatically. Klik op de knop Select.

11. PreCheck in - auto shipment = off Stap 9 BUG: The Transporter should also be set automatically. Now a complete list of transporters is shown. We choose transporter 2. Klik op de knop Select.

12. PreCheck in - auto shipment = off Stap 10 Then we get a Invalid Tranporter message. This is a correct message based on the postal code settings. Desired situation: We want Rentpro to set the Serving Branch and Tranporter based on the postal code matrix and the user is not allowed to change it. Klik in het veld.

13. PreCheck in - auto shipment = off Stap 11 Now we choose transporter 1000 which is the right one. Druk op [Tab].

14. PreCheck in - auto shipment = off Stap 12 Druk op [Tab].

15. PreCheck in - auto shipment = off Stap 13 Druk op [Tab].

16. PreCheck in - auto shipment = off Stap 14 Now we get a confirmation screen which is good. Klik op de knop Exit.

17. PreCheck in - auto shipment = off Stap 15 Then the shipment is mailed as set up. Which is good.

18. PreCheck in - auto shipment = off Stap 16 Klik op de knop OK.

19. PreCheck in - auto shipment = off Stap 17 The agreement is pre checked in. And the shipment is created correct. BUG:But the vehicle transaction is not updated right as you can see in the next frame. Laat de muisknop los.

20. PreCheck in - auto shipment = off Stap 18 BUG: The shipment is correct, but the vehicle transaction is not updated to the right destinations Branch. Klik op het gewenste object.

21. PreCheck in - auto shipment = off Stap 19 Shipment is pending. Which is good. Schuif het object met het muiswiel.

22. PreCheck in - auto shipment = off Stap 20 Shipment is send by mail (faxserver in our case) and received by the tranporter. BUG: AAN: Inname locatie (destination branch) should be filled with AAN: >. Laat de muisknop los.

23. PreCheck in - auto shipment = off Stap 21 now we accept the shipment by hand. Klik op het lijstitem AAccepted.

24. PreCheck in - auto shipment = off Stap 22 And we get the question to send the pre_shipment mail. BUG: This mail is not send, or not send by the correct mailserver. We should sent is with mailserver 2 (faxmailserver) Klik op de knop Proceed.

25. PreCheck in - auto shipment = off Stap 23 Klik op de knop Ja.

26. PreCheck in - auto shipment = off Stap 24 Now it is finished. Einde van procedure