1. PreCheck In – Auto Shipment = ON & Pick-Up = No

3. Stap 1 Auto shipment is on. And defaults are set. Klik op de knop Select Branches.

4. PreCheck In – Auto Shipment = ON & Pick-Up = No Stap 2 All the precheck in Branches are selected for auto shipment. Typ de gewenste informatie in het veld. Typ "15-rfs-7".

5. PreCheck In – Auto Shipment = ON & Pick-Up = No Stap 3 This car is marked for auto shipment and we are going to pre check in this car in the next sheet. Druk op [Enter].

6. PreCheck In – Auto Shipment = ON & Pick-Up = No Stap 4 we are going to pre check in this car, marked for auto shipment, at a auto shipment pre check in Branch and auto shipment in general is ON. Druk op [Tab].

7. PreCheck In – Auto Shipment = ON & Pick-Up = No Stap 5 all the information is entered, pickup is NO Laat de muisknop los.

8. PreCheck In – Auto Shipment = ON & Pick-Up = No Stap 6 Pre check in is made, confirmation screen is on the screen. BUG: User is not asked to send email/xml to transporter. So no shipment is send to the transporter. Klik op de titelbalk.

9. PreCheck In – Auto Shipment = ON & Pick-Up = No Stap 7 Shipment is made correct. BUG: sending process is not working properly. Druk op de toets en [Shift] en wijs de titelbalk aan.

10. PreCheck In – Auto Shipment = ON & Pick-Up = No Stap 8 As you can see transporter 1000 is set to receive email shipments. Einde van procedure