1. Moeller GmbH Seite - 1 PROFIBUS-DP-Slave Integration of XC100,200 in PROFIBUS fieldbus XIOC-NET-DP-S

2. Dateiname Schutzvermerk ISO 16016 beachten Moeller GmbH Seite - 2 XIOC-NET-DP-S Product- Feature Number of modules  up to 2 modules with XC100  up to 3 modules with XC200  Acceptable slot number: 1,2,3 Interface  9 pin SUB-D connector  Bus termination on board Data exchange  244/244 Byte for Receive/Transmit  Protocol profile: DP-V0 Slave  Baud rate up to 12 MB

3. Dateiname Schutzvermerk ISO 16016 beachten Moeller GmbH Seite - 3 XIOC-NET-DP-S System- Feature All PROFIBUS DP Master can be used  XC100,200 with XIOC-NET-DP-M  HMI-PLCs with DP-Master  PS416-NET-440, LE4-504-BS1  3rd Party DP-Master EM4-204 XIOC-NET-DP-S XION XIOC-NET-DP-M 3rd Party Master

4. Dateiname Schutzvermerk ISO 16016 beachten Moeller GmbH Seite - 4 1. Select XIOC-NET-DP-S module 2. Enter Slave address 3. Define I/O- addresses (or use default) XIOC-NET-DP-S Configuration (1)

5. Dateiname Schutzvermerk ISO 16016 beachten Moeller GmbH Seite - 5 XIOC-NET-DP-S Configuration (2) 4. Select range of Send- and Receive bytes 5. Send- and Receive- bytes can be used as “normal” I/O Variables

6. Dateiname Schutzvermerk ISO 16016 beachten Moeller GmbH Seite - 6 XIOC-NET-DP-S Technical Data Article number: 286419 List price: 300€

7. Dateiname Schutzvermerk ISO 16016 beachten Moeller GmbH Seite - 7 XC100: Version >= 04, Firmware >= 3.10 XC200 Version >=04, Firmware >= 1.03.02 XSoft V2.3.2 + xc_update_03_05 Documentation: XIOC-Signal modules AWB 2725-1452 Function blocks for XSOFTAWB 2786-1456 XIOC-NET-DP-S Precondition