1. Cardax FT Version 5

2. System Overview
Cardax FT Command Centre - central management tool (software), server / workstations
Multiple connectivity options using Cardax FT Controller 3000 and Cardax FT Controller 5000GL architecture (hardware)
Cardax Readers
This system overview illustrates connectivity in the Cardax FT system.
In terms of Cardax FT hardware: The Cardax FT Controller 5000GL and the Cardax FT Controller 3000 are the Intelligent Field Controllers in the Cardax FT system, and communicate with the Cardax FT Command Centre (the head-end software).
Cardax FT can be configured to manage systems larger than the standard configuration; contact Gallagher Security Management Systems to discuss configuration options.

3. Cardax FT Command Centre Remote Monitoring Service
Distributed Solution
Command Centre + RMS
Operator Dials up a Controller with Command Centre for configuration changes
Controller can automatically dial up Remote Monitoring Station to report alarms/events as they occur using Contact ID
Monitor (PPP)
Configure
(PPP)
Monitor (Contact ID)
Cardax FT Command Centre
Remote Monitoring Service

4. Cardax FT Technology Platform
By using selected technologies, Cardax FT is a powerful, flexible security system.

5. Communications Network Capable
Resides directly on existing TCP/IP Networks
TCP - Transmission Control Protocol
IP - Internet Protocol
Remote Dial-up Capable
Modem over PSTN
PSTN (Public Switched Telephone Network)
Designed for scalability
Supports from one more workstation upward, only limited by your server and network capability
Modem

6. Communications Designed for modern networks Onboard native Ethernet
Modem
Designed for modern networks
Onboard native Ethernet
No need for terminal servers

7. Communications
Innovation in security
All Cardax FT Controllers can directly communicate with each other (Peer-to-Peer)
Communicates over Ethernet
No interaction with Command Centre required
System Design Flexibility
One Controller can control and monitor devices other separate Controllers
Cardax FT Remote Arming Terminal & Dialler 3000 heavily exploit Peer-to-Peer capability

8. Extending the boundaries
Designed to use minimal bandwidth
- 1 Access Event = 100 bytes
TCP/IP communicates allow:
Web Browsing to the Controller
Device Software Download, no EPROM
Keeping in mind the system’s ability to reside on an organisation's shared network, the system communications have been designed to use minimal bandwidth.
Cardax understands that security of data is paramount. Network data is encrypted to a very high standard using the technology used to secure banking transactions made over the Internet.
The system communications use TCP/IP, a world standard network and Internet transmission protocol, over an Ethernet network
Cardax FT has been built with the IT environment at the forefront.

9. System Overview
From 1 cardholder and up to 100,000 cardholders* (system wide)
From 1 Controller and up to 500 Controllers *
From no field devices and up to 5000 field devices *
In its standard configuration the system will be capable of supporting:
Up to 100,000 cardholders
Up to 500 Controllers per system (100 per Communications server)
Up to 5,000 field devices per system (see Controller datasheets for specs).
* Indicative number only. Subject to configurations, network capacities and activity

10. System Overview Operators: unlimited configured operators
unlimited operators logged on at the same time
Controlled Outputs 20,000 *
Alarm Inputs ,000 *
Other system capacities include:
500 configured operators with up to 20 operators logged on at the same time
Up to 20,000 Controlled Outputs per system (10,000 per Communications Server)
Up to 30,000 Alarm Inputs per system (15,000 per Communications Sever)
Up to 4,000 Access Control Zones per system.
IDTs with Intercom *
Cameras *
* Indicative number only. Subject to configurations, network capacities and activity

11. Operating Platforms
Support for the following Operating Systems/Service Packs is included in v5:
Sequal Server 2000 MSDE Service Pack 4
Windows 2000 Service Pack 4
Internet Explorer 6 Service Pack 1
The Cardax FT Command Center server v5 resides on a Microsoft® Windows® 2000 or 2003 or XP Professional operating platform.

12. Database Management
Cardax FT can use has selected the Microsoft® SQL Desktop Engine Database, for Cardax FT Command Centre
Microsoft® SQL 2000 Server is available as an option, where required
- With Windows 2003 Server (no XP Server Version)
The database that comes standard with Cardax FT Command Centre is the Microsoft SQL Desktop Engine (MSDE).
The MSDE database is able to support small to very large databases whilst retaining data integrity and performance. It is also commonly specified database used globally.
It is possible for sites to upgrade their database from MSDE to the fully featured Microsoft SQL 2000 Server database, to access the SQL server management tools and to increase the size of the database capacity.
Using these database options, it is easy to integrate and share data with other systems.

13. Cardax FT Integration Platform

14. Integration Platform Integration – Import/Export Cardholders
Automatically Import people records from 3rd party Databases using Cardax FT XML Interface. (Extensible Markup Language)
Create people records as Cardax FT Cardholders and assign them access.
Can define how often to Import Cardholders.
XML Import
External Database of People
(Employee, Student, Customer, Contractor)
Cardax FT Command Centre

15. External Interfacing Resource Management
Importing timed resource bookings from 3rd Party Applications
(e.g. Syllabus Plus) provides the ability to:
Lock & Unlock a specific zones for the duration of scheduled booking
Automatically activate lighting at a pre-configured time
Automatically activate air conditioning at a pre-configured time
Automatically activate projector units at a pre-configured time period
Automatically de-activate lighting, air conditioning and projectors at conclusion of booking.
Demo Cardholder Import

16. Cardax FT Command Centre
Integration Platform
Integration - Export Events using:
COM/DCOM, the latest generation of Microsoft® Windows development tools
OPC (OLE for Process Control) for Alarms & Events (Object Linking & Embedding)
Automatically Export Cardax FT events as they occur to any 3rd party (OPC compliant) system. These systems receive OPC events and alarms just like an OPC viewer, the application manages processes thereafter
Building Management and Process Control
Remote Alarms Management (Contact ID)
Time and Attendance package interfaces
CCTV interface
DVR interface
3rd Party System
(BMS, CCTV, Payroll, T&A)
OPC Events
Cardax FT Command Centre

17. Cardax FT Command Centre
Integration Platform
Cardax FT Command Centre
DVR
Low Level trigger record
Low Level indication of record
View / Record DVR
Camera
Low Level Monitoring & Control
Integration - DVR
Seamlessly integrate with Digital Video recording systems
View DVR Live
View recorded DVR sequences
Record DVR sequences
DVR System
Must provide Microsoft ActiveX format software interface.
Must be able to communicate over network (LAN/WAN)

18. High Level Alarms and Events API
Events from third party systems can be received through the Cardax FT Controller 5000GL using the Cardax FT events and alarms API.
It is ideal for high level interfaces to third party systems such as DVR and duress system.

19. Integration with DVR
A unique, solution for integrated electronic access control and live/recorded digital imaging
One User Interface
Access live and recorded video through the Cardax FT
Single click to view live video
from a Cardax FT site plan

20. Jacques Intercom HLI TCP/IP based Intercom
Master/Slave units controlled by Jacques Server
CCFT controls connectivity, logs alarms and events
First install at Brisbane Magistrates Court

21. High Level Elevator Interface
Elevator HLI item
Advanced tab
Controller properties
Serial devices tab
Elevator Car HLI item
Kone and Otis supported at present time; Schinder system is a future candidate
The LiftPro system is also available to support integration of lift systems

22. Integration & Interfacing
Integration with Biometrics
Integration with SAGEM MorphoAccess biometric finger print readers for a full biometric access control solution

23. Cardax FT Online Manager
Cardax FT Online Manager is a browser based tool for the management and monitoring of Cardholders, Alarms and Events from anywhere that Operators have access to a web browser.
Unlike a Cardax FT Command Centre Workstation the Online Manager Workstation does not require installation of software; access is achieved via a web browser.
Cardax FT Online Manager can be accessed anywhere, anytime.

24. Cardax FT Online Manager

25. PowerFence Trophy FT Integration
Full high level integration of PowerFence Trophy system into Cardax FT Command Centre
Full configure, control and monitor capability
We believe this will be the first in the world
Fully integrated
– Single manufacturer

26. Security System integrity Secure databases (username passwords)
Card
System integrity
Secure databases (username passwords)
Command Centre to Controller 40 bit standard or 168 bit
Proprietary Cardax encryption on RS485 communications
Cardax reader to Controller is encrypted. Cardax readers are monitored
Card data is encrypted
RAT is 40 bit standard or 168 bit
End-to-end security

27. Cardax FT Command Centre
The Cardax FT Command Centre is the server software for the Cardax FT system.
It provides control of the whole security system and provides the graphical user interface at operator workstations.

28. Cardax FT Solutions Ease of install Site configuration wizards
Configuration templates
Microsoft Windows style application

29. Effective User Interface
Wizards for
Creating Doors
Creating Hardware
Creating
Cardholders
Enrolment

30. Cardholder Management
Command Centre FT manages cardholders by name, not by a card number
Cardax FT Command Centre manages cardholders by name, not by a card number. This significant feature means that a single cardholder record is created for each person.
Any combination of vehicle tags, proximity cards and biometric recognition templates can then all be assigned to the one cardholder record. This feature simplifies cardholder management, important for organisations with a large number of cardholders, such as Universities.

31. Access Groups A centralisation tools Access Groups control - Who
- Where
- When
- PDFs
- Privileges
- Alarms Zones
Cardax FT Command Centre manages cardholders by name, not by a card number. This significant feature means that a single cardholder record is created for each person.
Any combination of vehicle tags, proximity cards and biometric recognition templates can then all be assigned to the one cardholder record. This feature simplifies cardholder management, important for organisations with a large number of cardholders, such as Universities.

32. Cardholders 64 Personal Data Fields
Store cardholder images, signatures etc
Can import and export cardholder data (including images)
Suitable for interfacing with HR systems
PhotoID feature

33. Temporary Access
Cardholders can now be given temporary membership of Access Groups
Membership can be scheduled for future times and dates
Status of cardholder membership is recorded as pending, active or expired

34. System Division
System division enables a site to be divided amongst operators for system management and monitoring
An operator can only see / manage their division
System division enables a site to be divided amongst operators for system management and monitoring.
An operator can only see and do things in his or her division.
System division suits multi-tenanted building situations and very large sites where more than one operator is required to monitor a site.

35. Operator Groups Assign Operator Privileges to Operator Groups
Control which PDFs Operators in a Group can see/edit

36. PhotoID and PDFs PhotoID using links to PDFs and Images
PDFs are linked to Access Groups not Cardholders

37. Challenge
The Cardax FT Command Centre Challenge feature allows an operator to contest Cardholders as they attempt to gain access through a Door.
Cardax FT Command Centre manages cardholders by name, not by a card number. This significant feature means that a single cardholder record is created for each person.
Any combination of vehicle tags, proximity cards and biometric recognition templates can then all be assigned to the one cardholder record. This feature simplifies cardholder management, important for organisations with a large number of cardholders, such as Universities.

38. Action Plan & Alarm Instructions
Action Plans and Escalation can be assigned to events in the Cardax FT system.

39. Action Plans & Alarm Instructions
Alarm Instructions can be assigned to alarm
events in the Cardax FT system

40. Escalated Alarm Viewer
Alarm property page enhancements
Dynamic update of fields/buttons
More room for Description text
15% larger window
Escalation state
Site plan button always accessible
History enhanced
Time stamped arrival time of the escalated alarm

41. Full Intruder Alarm Functionality
Intruder Detection zones can be set up with entry / exit delays
Alarms set / unset by authorised cardholders using readers and Remote Arming Terminals
Remote Arming Terminals eliminate need for separate intruder alarm system
Cardax FT has been designed to incorporate full intruder alarm functionality.
The system includes Intruder Detection zones, which can be set up with entry and exit delays.
Alarms can be set and unset by authorised cardholders using card readers.
Because Intruder Alarm functionality is incorporated within the system, it eliminates the need for a separate intruder alarm system and separate alarm panels. Cost savings can be made and importantly, all alarms can be monitored through the Cardax FT Command Centre.

42. Site Plans
Site Plans show a visual representation of a site at the operator workstation. An operator can perform many operations from a site plan, for example temporarily overriding the status of a door.

43. Bulk Changes – Cardholders & Divisions
Changes can be made in one operation to multiple cardholder attributes, or Cardax FT item Divisions
Can be scheduled and/or run via macros
Routine changes can be saved for future use
Bulk Change Master List Window records active, scheduled, saved, created, edited and failed bulk changes.

44. Icon Set Enhancements
Users can now view, create, modify and delete Icon Sets
Ability to import .ICO files to customise relevant Cardax FT items
New default icon sets for
Barrier Arms
PIRs
Windows
Sirens

45. Variable End-of-Line Resistors
Existing end-of-line resistors can now be configured to work with Cardax FT V5.0
Labour saving for sites migrating to Command Centre FT
Choice of nine common resistor combinations
Works with all Controllers, and all GBUS devices

46. Pre-Programmed Macro Overrides
Overrides can now be run or scheduled via pre-programmed macros
Macros can contain up to 20 distinct Cardax FT items with associated actions
Can support overrides to Outputs, Access and Alarm Zones, run bulk changes, automatically generate evacuation reports and initiate database resynchronisation

47. Cardax FT Command Centre Action Plans
Action Plans can now be triggered from Event Groups within Cardax FT Command Centre
Can initiate macros, change alarm priorities, or run an evacuation report

48. Notes/Memo Fields All FT Items and cardholders now have a notes field
Supports word wrap, insert, delete, cut copy and paste functions
Access to the notes field is subject to Operator privileges

49. Configurable Alarm Sounds
Alarm sounds can now be assigned to each alarm priority
Operators with the relevant privileges can assign any file in the .wav format to an alarm sound

50. Alarm Flooding
Alarm Flood Capability

51. CSN Cardholder Identification – Mifare Readers
Cardax Mifare Readers can now use the CSN number on Mifare cards as Cardholder identification
Selectable option enables the Reader to check for the CSN number after checking for valid Cardax data
Only available on Cardax Mifare Readers produced from the release of Command Centre Version 5.0

52. Cardax FT Remote Arming Terminal
Modem
Innovation in security
A single Remote Arming Terminal can perform Alarms Management on any Controller on the system
Leveraging Peer-to-Peer communications
No interaction with Command Centre required
Enables full redundancy with multiple RATs

53. Remote Alarms Management
Ademco Contact ID format
Modem connected directly to Controller(s) 3000 & 5000GL
No other 3rd Party modem will successfully transmit Contact ID from Cardax FT
Configurable Transmit Rules for Events/Alarms
Local/Remote alarms via escalation Escalations
The Find Window is a user friendly, powerful tool in Cardax FT Command Centre, that makes it easy to search for information.
It is used to find any item in the system that matches search criteria and is a central tool for maintaining a site.
The Find Window’s usage is consistent for many editing operations such as browsing properties of cardholders, and finding any cardholder, device, or logical entity in the system.
The Find Window works efficiently over large databases.

54. Remote Alarms Management
Modem
Innovation in security
A single Dialler 3000 / 5000GL can transmit Contact ID to a Remote Monitoring Station for any number of Controllers on your system
Leveraging Peer-to-Peer communications
No interaction with Command Centre required
Fail Over Dialling
1. Alarm on Controller 1, attempts to dial using primary Dialler.
2. Primary Dialler fails, re-directs Alarm to first backup Dialler
3. First backup Dialler fails , re-directs Alarm to second backup Dialler
4. Alarm successfully transmitted

55. Find Window Used to find items that match a search criteria
Central, powerful tool for maintaining a site
Works efficiently over large databases
The Find Window is a user friendly, powerful tool in Cardax FT Command Centre, that makes it easy to search for information.
It is used to find any item in the system that matches search criteria and is a central tool for maintaining a site.
The Find Window’s usage is consistent for many editing operations such as browsing properties of cardholders, and finding any cardholder, device, or logical entity in the system.
The Find Window works efficiently over large databases.

56. Report Generation
A range of report templates are available, including:
Evacuation Report: last known location of cardholders
Activity Report: a subset of system activity
Cardholder Report: detailed and summary reports
Access Group Report: properties of access groups
Access Report: cardholder access rights
Time & Attendance Report: tracking hours on site
Configuration Report: system configuration
Exception Report: exceptional conditions.
Can be saved to .csv file
A range of report templates are available in Cardax FT Command Centre to integrate the usability of the system’s information into intelligence for the organisation in day to day operations and decisions.
These reports include:
An Evacuation / Cardholder Location Report to show the last known location of cardholders, who are grouped by zone, then card.
An Activity Report to view a subset of system activity.
Cardholder Reports - both detailed and summary report options.
An Access Group Report - showing properties of access groups.
Access Report - cardholder access rights.
Time & Attendance Report - tracking hours on site.
A Configuration Report, providing a hard copy backup of the system configuration.
An Exception Report to show all ‘exceptional’ conditions in the system, for example, any outstanding alarms and overrides currently in effect.

57. Additional Reporting Database Queries
Adhoc reports can be created by dragging filtered information from the Find Window, into Microsoft applications, such as Microsoft Word.

58. Backup/Archive/Template
Operators can trigger a backup at any time
Uses the SQL engine to perform the backup of the database Backup and Restore across multiple media
Archive
Archive the Event database
Templates
Allows Cardax FT configurations to be used by a number of sites, or specific sites,
Configuration pre-built off site, which is then able to be installed on site).
The ability to easily backup and restore a security system is very important.
In the Cardax FT Series 5 system:
Operators can trigger a backup at any time.
The system uses the SQL engine to perform the backup of the database.
Backup and Restore will work across multiple media.

59. Software Maintenance Agreements
Available to Cardax customers to entitle them to receive Cardax FT system software releases for a period of one year, renewable annually
Keep pace with operating platform releases
Keep pace with Cardax FT features and benefits
Enhance system performance and functionality Please refer to Cardax Product List or support.cardax.com for agreement and details

60. In-Application Help
The Cardax FT Command Centre User Guide is provided as Online Help (produced in HTML Help Workshop) and provides step-by-step procedures for configuring and using the system.
The Online Help also provides fast and efficient search functionality.
Users are able to find the information they require quickly by searching on key words or clicking on hyperlinks to other related topics.

61. Cardax FT Controllers 3000 and 5000GL
The Cardax FT field hardware includes two architectures based on communications the:
Cardax FT GBUS communications,
Cardax FT LOCAL BUS communications, featuring:
a range of Input and Output devices (each designed to meet a particular access control or security application),
Door Readers.

62. Cardax FT Controller 3000 - 4R and 8R
Intelligent Field Controller, stores 30,000 cardholder (default) or 46,000* records max. and 10,000 access events (default) or 22,000* max.
Integrates I/O functionality and door control for up to 8 doors
Does not require the use of other field devices
The Cardax FT Controller 3000 is the cost-effective, Intelligent Field Controller for the system.
Cardax FT 4R has 4 reader connections on-board.
Cardax FT 8R has 8 reader connections on-board.
The Controller 3000 integrates I/O functionality, and door control for up to 8 doors (with Cardax readers / 4 doors with Wiegand readers). This is achieved without the use of any other field devices, and provides a cost effective option for system configuration.
* Number of cardholders and events is determined by the cardholder / event ratio.

63. Cardax FT Controller 3000
Card
The Cardax FT Controller R has on-board
connections for the following (with variations for
the Cardax FT Controller R shown in
brackets):
8 (4) Cardax readers or 4 (2) Wiegand format readers
16 (8) balanced inputs and 8 (4) relay outputs
One GBUS port to support:
8 GBUS I/O devices (including GBUS Universal Reader Interfaces, &
4 Cardax FT Remote Arming Terminals, &
16 PowerFence Trophy FT Fence Controllers

64. Cardax FT Dialler 3000 Remote Alarms Monitoring
Ability to transmit alarms to remote monitoring stations using industry-standard Contact ID data format.
Enables the Command Centre to dial-up Cardax FT Controllers, to perform configuration and alarm monitoring remotely

65. Cardax FT Controller 5000GL
Low cost replacement for Controller 5000
Zero door controller
Built in Alarm Dialler capability
Double the on-board memory
Still supports all Controller 5000 LOCAL BUS devices
Support for LOCAL BUS and GBUS (or two full GBUS runs)
Support for all Cardax FT Alarms Devices
Configurable with single door expansion unit (GBUS URI)

66. Cardax FT Controller 5000GL
One GBUS Port to support:
8 GBUS I/O devices (including GBUS URI interfaces for reader connections), and
4 Cardax FT Remote Arming Terminals,and
16 PowerFence Trophy FT Fence Controllers
Once LOCAL BUS port (with 2 separate channels):
To support 16 LOCAL BUS devices, or
To convert to a second GBUS port
4 balanced inputs
1 relay output
The Cardax FT Dialler 5000GL to support dial-up
communications with the Cardax FT Command
Centre directly or via the Internet.

67. Cardax Cabinet & Power Supply

68. Cardax FT GBUS I/O Devices
Cardax FT 8-Input Expansion Board
Cardax FT I/O Expansion Board
Cardax FT GBUS Universal Reader Interface
Cardax FT Remote Arming Terminal
- 8 inputs, 4 outputs
- 8 Input Expansion
Two PCBs + Tamper Board per Cardax FT Cabinet
Tamper Board provides tamper protection

69. Cardax FT Remote Arming Terminal
User-friendly keypad interface for intruder alarms management
Secure logon, through user codes
Users are assigned privileges
Monitor, arm, and disarm alarm zones
Controls up to 30 alarm zones, and up to 100 inputs on any Controller
Alarms Management functionality is available to the operator at the Command Centre workstation, however, the Cardax FT Remote Arming Terminal provides the security guard with the ability to perform such operations at the key pad itself.
Users are assigned privileges to monitor, arm, and disarm, alarm zones with each Cardax FT Remote Arming Terminal controlling up to 30 alarm zones, and up to 100 inputs on any Controller (Cardax FT Controller 3000 or 5000GL).

70. Cardax FT GBUS URI

71. GBUS Universal Reader Interface
New GBUS Universal Reader Interface (URI) device
Low cost replacement of the LOCAL BUS URI
8 inputs, 2 outputs, 2 Cardax Readers or 1 Wiegand Reader
Small design size and plastic enclosure allow cavity wall mounting
Able to be mounted within a standard Cardax FT cabinet
Optional facility code based off-line mode

72. 5000 GL + GBUS URI - Retrofits
Slashes re-wiring costs when replacing RS-485 daisy chained systems

73. Cardax FT LOCAL BUS I/O Devices
Cardax FT Reader I/O Interface
Cardax FT Universal Reader Interface
Cardax FT I/O Interface
Cardax FT Relay Interface
Cardax FT Strike Controller
Cardax FT Intelligent Door Terminal

74. Cardax FT Intelligent Door Terminal
Proximity technology
Illuminated key pad enables:
PIN option
Intruder alarm arm/disarm
Intercom microphone
Aesthetically pleasing design
Tamper protected
Sounds from speaker
complement visual feedback
IP54 Vandal resistant
cover available
Supports downloadable
code
Intercom call button
Dot matrix display supports:
prompts, time & date,
feedback, and cardholder names
Available in Cardax Cool Grey or charcoal
This is the Cardax FT Intelligent Door Terminal. It incorporates TIRIS, or Mifare proximity technology.
The Cardax FT IDT includes an optional integrated Intercom.
This enables a person at the card reader to communicate with an operator at a workstation.
Use of the Intercom is recorded as an event in the system’s event log. It is also possible to record conversations to be stored on the server.
All Cardax FT Intelligent Door Terminals support the following features:
A dot matrix LCD panel enables user-configured messages and prompts. Multiple language character sets are supported by the dot matrix LCD.
The F3 key is the Intercom Call button. A person at the reader presses this to let the operator know that someone wishes to speak to them
An illuminated keypad supports the entry of Personal Identification Numbers and the setting and unsetting of alarms
The microphone is incorporated for Intercom use
Sounds from the reader’s speaker complement visual feedback, for example, to denote whether access was granted or denied, or to indicate that the door has been left open too long
The readers support downloadable code so software enhancements can be made over the network
The readers are tamper protected and an alarm will be triggered should someone interfere with the readers communication links
They are rated IP 54 and a cover is available to increase weather tolerance and resistance to vandal attack.
In keeping with Cardax door readers the Cardax FT IDT are available in cool grey and charcoal.

75. Intercom
The Cardax FT Intelligent Door Terminal includes an Intercom option enabling a person to communicate with the operator
F3 on the Plus readers is the “Call” button
User Prompts appear on reader LCD
Use of the Intercom is recorded as an event
The Cardax FT IDT includes an optional integrated Intercom.
This enables a person at the card reader to communicate with an operator at a workstation.
The F3 button on the Plus readers is the “Call” button. A person presses this button when they wish to speak to an operator.
User prompts for the Intercom can be configured to appear on the reader’s LCD panel.
Use of the Intercom is recorded as an event in the system’s event log.

76. Cardax Reader Technologies
Mifare Contactless Smartcard
125 kHz Proximity
Magstripe
Cardax offers a range of reader technologies:
Magstripe,
Mifare Contactless Smartcard, and
125 Khz Proximity.

77. Cardax Readers Cardax Proximity Readers Cardax Swipe Readers
The readers are available in Cardax Cool Grey and Charcoal colours.
Cardax
Proximity Readers
Cardax
Swipe Readers

78. Mifare SmartCard MIFARE has already been applied worldwide to:
Public transport sector
Airline ticketing
Access control
Identity cards
Road toll collection schemes
Military - Multi-function (identity card, access control card, meal card and for purchases; computer access may be added in future)
Stored value applications
Banking cards
The readers are available in Cardax Cool Grey and Charcoal colours.

79. Gallagher Security Management Systems
Leverages off Gallagher Group resources
- Training
- Technical Support
- R & D
- Marketing
Gallagher Group Head Office - NZ

80. Cardax On-Line Training

81. Technical Support Six Support Team Members (based in NZ)
Support Manager
Knowledge Base
Technical Account Managers (TAMs)

82. Research & Development
Extensive software development skills
Over 60 skilled people in R&D
Software Engineering
COM DCOM
32 bit embedded development
8 bit embedded development
Object oriented design
Project management
TCP/IP - Internet protocol development
Custom protocol development
Development arm in India

83. Marketing Dedicated marketing team – provide a range of resources
Public website:
Secure partner support site: support.cardax.com
Cardax FT datasheets and brochures available

84. Field Representatives
Business Development Managers (BDMs)
Technical Account Managers (TAMs)

85. Thank you! Thank you for listening to this presentation on Cardax FT.
Disclaimer
Whilst every effort has been made to ensure accuracy, neither Gallagher Group Ltd nor any employee of the company, shall be liable on any ground whatsoever to any party in respect of decisions or actions they may make as a result of using this information.
In accordance with the Gallagher policy of continuing development, design and specifications are subject to change without notice.
Cardax access control systems and products are developed and manufactured by Gallagher Group Ltd, an ISO 9001 certificated supplier.
Cardax is a registered trademark of Gallagher Group Ltd.