1. Composite Materials Dr. Alejandro Manzano Ramírez amanzanor2006@hotmail.com amanzano@qro.cinvestav.nx October 2007

2. Bibliografy: 1.HANDBOOK OF COMPOSITES, SECOND EDITION Edited by S. T. Peters Process Research, MountainView, Calfornia, USA, Second edition 1998 1998 Chapman & Hall Thomson Science is a division of International Thomson Publishing 2.Chapter 6, Composite Materials, Alejandro Manzano Ramírez and Enrique Barrera, "Synthesis and Properties of Advanced Materials" edited by Carl McHargue,J.B.Darby,Jr., Miguel José Yacamán, José Reyes Gasga, Kluwer Academic Publishers,1997,pp. 148-197 3.F.C. Campbell,Manufacturing Technology for Aerospace Structural Materials,Firts Edition, Elsevier Ltd 2005 4.Matthews F.L. and Rawlings R.D. “Composite materials: Engineering and Science”,,Woodhead Publishing Ltd and CRC Press LLC,Reprinted 2005 5.Serope Kalpakjan and Steven R. Schmid, “Manufacturing Processes for Engineering Materials, Fourth edition Pearson Education, Inc, Reprint 2003 6.Willian F. Smith “Foundations of materials Science and Engineering”, Third edition, Mc Graw-Hill 2004 7.Low-cost composite materials and structures for aircraft applications”, Deo, R.B., Starnes, J.H., Holzwarth, R.C.,May 2001 8.Handbook of Materials Selection, Myer Kutz Associates, Inc.,JOHN WILEY & SONS, INC.2002 9.Advance Ceramic Processing and Technology J.G.P.Binner, processing of ceramic composites,Noyes Publications 1990, p. 131

3. Further readings Jean LUYCKX, Composites à fibres de carbone dans le génie civil, Techniques de l’Ingénieur, traité Plastiques et Composites A. Manzano-Ramírez, E. Nava-Vazquez and C. Vazquez-López, "Surface Analysis of an Aluminium Metal Matrix Composite", Scripta Metallurgical et. Materialia, 1993, vol.29, 9, pp. 1241-1246 A. Manzano-Ramírez, A. Magallanes-Castañeda and F.Ruiz, "Topographic Features of an 319 Al/SiCp/15p", Scripta Metallurgica et Materialia, 1994, vol.31,10, pp.1371-1376 Manzano-Ramírez A., Ruiz F. y Magallanes-Castañeda A., "Observaciones Microestructurales en el Composite Al/Si/15p Obtenido por el Procedimiento de Compocolado", Revista de Metalurgia, CENIM Madrid,España, vol. 32, 6, Nov-Dic. 1996, pp. 359-368. Hallen J. M., Balmori H.M.,Jaramillo D.,Estrada J.L.,González J.L.,Cruz H.S. and Manzano A.,"Influence of Mg and Stirring on the Strength of an aluminium matrix Composite obtained by Compocasting", Key Engineering MATERIALS Vols. 127-131 (1997),pp. 495-502 R. García, A.Manzano, V.H. López, and E. Bedolla., “Comparative welding study of the Metal Matrix Composite with MIG Welding Process, using Direct and Indirect Electric Arc”, Met. Trans B Journal, vol. 33B, no. 6, pp. 932 – 937, 2002. García R., López V.H., Bedolla E. and Manzano A., “The MIG welding process with Indirect Electric Arc”, J. of Materials Science