1. © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public ITE PC v4.0 Chapter 1 1 Perencanaan dan Pengkabelan Jaringan Dosen Pengampu: Resi Utami Putri, S.Kom., M.Cs.

2. ITE PC v4.0 Chapter 1 2 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Objectives  Mengidentifikasi dasar media jaringan yang diperlukan untuk membuat koneksi LAN.  Mengidentifikasi jenis koneksi untuk koneksi intermediate device dan end device LAN. - Mengidentifikasi konfigurasi untuk kabel straight-through dan crossover. -Mengidentifikasi jenis kabel yang berbeda, standard dan port yang digunakan untuk koneksi WAN. -Mendefinisikan peran manajemen koneksi perangkat ketika menggunakana peralatan Cisco atau lainnya.  Merancang skema pengalamatan untuk inter-network dan memberikan ranges untuk host, network devices dan the router interface.  Membandingkan dan membedakan pentingnya desain jaringan.

3. ITE PC v4.0 Chapter 1 3 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Basic Network Media Required to Make a LAN Connection.  Select the appropriate hardware, including the cabling, to install several computers together in a LAN

4. ITE PC v4.0 Chapter 1 4 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Basic Network Media Required to Make a LAN Connection.  To identify some key aspects of the devices they will be employing in a LAN

5. ITE PC v4.0 Chapter 1 5 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Basic Network Media Required to Make a LAN Connection.  Connect two computers with a switch

6. ITE PC v4.0 Chapter 1 6 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Types of Connections in a LAN  Given a specific network connection, identify the type of cable required to make the connection

7. ITE PC v4.0 Chapter 1 7 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Types of Connections in a LAN  Identify the correct cable to use in connecting intermediate and end devices in a LAN.

8. ITE PC v4.0 Chapter 1 8 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Types of Connections in a LAN  Identify the pinout of the straight-through and cross- over cables

9. ITE PC v4.0 Chapter 1 9 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Types of Connections in a LAN  Recognize that a different class of cables is used to connect WANs, and that the cables, standards and ports are different than those in use by LANs.

10. ITE PC v4.0 Chapter 1 10 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Types of Connections in a LAN  Define the role of device management connections when using Cisco equipment.

11. ITE PC v4.0 Chapter 1 11 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Design an Addressing Scheme for an Inter- network.  Design an address scheme for an internetwork and assign ranges for hosts, network devices and the router interface

12. ITE PC v4.0 Chapter 1 12 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Design an Addressing Scheme for an Inter- network.  Calculate the address ranges for sub networks

13. ITE PC v4.0 Chapter 1 13 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Importance of Network Designs  Given a network scenario, develop an appropriate networking scheme

14. ITE PC v4.0 Chapter 1 14 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Importance of Network Designs  Determine the total number of hosts in a network, accounting for present and future requirements

15. ITE PC v4.0 Chapter 1 15 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Importance of Network Designs  Given a network requirement, determine the optimum number of sub networks in the larger internetwork.

16. ITE PC v4.0 Chapter 1 16 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Importance of Network Designs  Describe how to count the segments between router interfaces.

17. ITE PC v4.0 Chapter 1 17 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public Summary

18. ITE PC v4.0 Chapter 1 18 © 2007 Cisco Systems, Inc. All rights reserved.Cisco Public