2. Modular Capacity - Test - System CS - 3001

3. Modular test system
Easy to operate
Expandable up to 4 strings with 192 voltage inputs
Block voltage : ± 16,6 VDC, (detection of voltage reversals)
600VDC CAT III (5000VAC test voltage)
Parallel test of up to 4 batteries

4. Connection area

5. Connection example
Standard
4mm safety connection

6. Bus area

7. Daisy chain connection
Bus connection
Daisy chain connection
Power supply and communication in a single cable
Standard RJ45 cable
Each string of modules can have a total connection length of > 100m

8. Connection example of a 24VDC battery
Bluetooth
communication

9. Testing of an UPS ( 2 racks with 5 x 4 x 12V-Block)
For ease of contact, not all input channels of a module must be used.
Only the blocks on one level of a cabinet need to be connected

10. Maximum installation 1 2 31 32 String 1 String 2 String 3 String 4RJ 45
CS-3001 Module
CS-3001 Module
CS-3001 Module
CS-3001 Module
String 1
DC IN RJ 45
CS-3001 Module
CS-3001 Module
CS-3001 Module
CS-3001 Module
String 2 RJ 45
CS-3001 Module
CS-3001 Module
CS-3001 Module
CS-3001 Module
String 3
DC IN RJ 45
CS-3001 Module
CS-3001 Module
CS-3001 Module
CS-3001 Module
String 4
CS-3001/PU
4 x 192 x 2V-Block

11. Resistance between any input > 2 MΩ (leakage < 0,3 mA)
Safety aspects
Resistance between any input
> 2 MΩ (leakage < 0,3 mA)
5000 VAC Isolation
The system uses no fragile mechanical relays for scanning the block voltages.
Semiconductor switches for voltage selection has been eliminated.
Defect switches can cause an electric shock, if no protection gloves are used.

12. Capacity Test

13. Capacity Test

14. Capacity Test

15. Capacity Test

16. Capacity Test