1. Horizontal Paintline

2. Layout

3. Jigging 25 jig bars available Can be used for long length upto 7m or small pieces Jigging and de-jigging made in same axis Cranes can take upto 3 jigs per load

4. Pre-treatment Chromating line Capacity for additional pre-treatment (ie. for steel sheets) 2m tanks x 7m profiles Heating by oil (boiler can be incl. although is overdimensioned) 2 manual Demag cranes

5. Conveyor Automatic and continuous conveyor Speed upto 3m/min Possible to modify conveyors to make plant more compact

6. Painting Gema paint technology (booth from 2004) 5 pistols each side (automated entry) Compressed air cleaning on pistol withdrawal 20 minute standard colour change

7. Infrared oven Between painting and main oven Initial melting of powder avoids cross contamination in the main oven Especially important when different colours in the main oven

8. Main oven Gas-fired with channels from underneath 2 gas burners at opposite corners

9. Also available... Spiral wrap packing line after dejigging with outfeed tables Line for covering painted sheets with protective foil

10. Additional Photos (pre-treatment and conveyor)

11. Additional Photos (painting)

12. Additional Photos (oven and conveyor)

13. Additional Photos (boiler and oil heating)