Presentation is loading. Please wait.

Presentation is loading. Please wait.

2 LDC borstplätering Tel: +46 248 17440 LDC Portable Electroplating 1.Cold process: Used at room temperature,

Published byRyder Ashburn Modified over 9 years ago

Similar presentations

Presentation on theme: "2 LDC borstplätering Tel: +46 248 17440 LDC Portable Electroplating 1.Cold process: Used at room temperature,"— Presentation transcript:

1

2 www.ldc-brushplating.com 2 LDC borstplätering Tel: +46 248 17440 ldc@swipnet.se LDC Portable Electroplating 1.Cold process: Used at room temperature, no stress or adjustments because of termal distorsion. 2.To tolerance: Normally no machining required 3.Quick metal build-up: 0,05 mm in 10-15 min. 4.Plating: On all conductive materials, cast iron, stainless, mild steel, copper, chrome etc 5.Dense deposits: No or very little porosity in most coatings 6.Many differens metals: Nickel, Gold, Silver, Copper, Cobolt, Zinc and alloys. 7.Excellent bonding: molecular bonding results in very god adhesion, all coatings can be machined, grinded or polished. 8.Mobile equipment: The repair can be done on site

3 www.ldc-brushplating.com3 LDC borstplätering

4 www.ldc-brushplating.com 4 LDC Brushplating Tel: +46 248 17440 info@LDCab.se Platform in North sea with damaged sealing areas in the blowout preventers.

5 www.ldc-brushplating.com 5 LDC Brushplating Tel: +46 248 17440 info@LDCab.se The sealing areas around the ball valve is corroded.

6 www.ldc-brushplating.com 6 LDC Brushplating Tel: +46 248 17440 info@LDCab.se Corroded sealing area in a blowout preventer is being brush plated with a hard copper of 250Hb.

7 www.ldc-brushplating.com 7 LDC Brushplating Tel: +46 248 17440 info@LDCab.se The surface is now brushplated with copper and with an thickness about 2mm.

8 www.ldc-brushplating.com 8 LDC Brushplating Tel: +46 248 17440 info@LDCab.se The surface is now mashined just to undersize to get the space for the final hard Nickel layer with an hardness of 58 HrC.

9 www.ldc-brushplating.com 9 LDC Brushplating Tel: +46 248 17440 info@LDCab.se Now is the final Nickel layer in process.

10 www.ldc-brushplating.com 10 LDC Brushplating Tel: +46 248 17440 info@LDCab.se After the Nickel plating is done no more mashining is required and the blowout preventer is ready for assembly.

11 www.ldc-brushplating.com 11 LDC Brushplating Tel: +46 248 17440 info@LDCab.se Damaged hydralic shafts on a drilltover in the Nort Sea was repaired onsite.

12 www.ldc-brushplating.com 12 LDC Brushplating Tel: +46 248 17440 info@LDCab.se An 10 meters long hydralic piston is damaged.

13 www.ldc-brushplating.com 11 LDC Brushplating Tel: +46 248 17440 info@LDCab.se Damaged area on the piston was about 6 meters long and up to 4 mm deep.

14 www.ldc-brushplating.com 14 LDC Brushplating Tel: +46 248 17440 info@LDCab.se All shar edges is to be grinded out. After that an hard copper of 250 Brinell is to be plated in the deep areas.

15 www.ldc-brushplating.com 15 LDC Brushplating Tel: +46 248 17440 info@LDCab.se Then the Copper layer is grinded back to original size we put an new Hard Chrome layer is plated on top. Then after that just some polishing.

16 www.ldc-brushplating.com 16 LDC borstplätering Tel: +46 248 17440 ldc@swipnet.se See you onsite. Best Regards LDC Brushplating

Download ppt "2 LDC borstplätering Tel: +46 248 17440 LDC Portable Electroplating 1.Cold process: Used at room temperature,"

Similar presentations

Outline Curriculum (5 lectures) Each lecture  45 minutes

Outline Curriculum (5 lectures) Each lecture  45 minutes
LDC borstplätering LDC borstplätering

LDC borstplätering LDC borstplätering
Technology Education Dept. Bellwood-Antis High School Mr. Crowell Mr. Mackereth.

Technology Education Dept. Bellwood-Antis High School Mr. Crowell Mr. Mackereth.
METALS Learning Objectives: What is METAL?

METALS Learning Objectives: What is METAL?
LDC borstplätering www.ldc-brushplating.com2 LDC Portable Electroplating 1.Cold process: used at room temperature, no stress or adjustments because of.

LDC borstplätering LDC Portable Electroplating 1.Cold process: used at room temperature, no stress or adjustments because of.
HABEEB HATTAB HABEEB Office: BN-Block, Level-3, Room-088 Ext. No.: 7292 H/P No.: 0126610058.

HABEEB HATTAB HABEEB Office: BN-Block, Level-3, Room Ext. No.: 7292 H/P No.:
By Tyler Hanse.  Deposition of a thin layer of metal on a surface by an electrical process involving oxidation-reduction.

By Tyler Hanse.  Deposition of a thin layer of metal on a surface by an electrical process involving oxidation-reduction.
2 LDC borstplätering Tel: +46 248 17440 Crankshaft for large Diesel engine.

2 LDC borstplätering Tel: Crankshaft for large Diesel engine.
Hard Chrome Plating in Feedwater Pumps

Hard Chrome Plating in Feedwater Pumps
Alloys Gold 24 karat gold 18 karat gold 14 karat gold Gold Copper Silver 18 / 24 atoms Au 24 / 24 atoms Au 14 / 24 atoms Au.

Alloys Gold 24 karat gold 18 karat gold 14 karat gold Gold Copper Silver 18 / 24 atoms Au 24 / 24 atoms Au 14 / 24 atoms Au.
METALS What is METAL? Different Types of Metals – Ferrous, Non-Ferrous, Alloys Main focus of Ferrous Metals Properties of Metals Characteristics of Ferrous.

METALS What is METAL? Different Types of Metals – Ferrous, Non-Ferrous, Alloys Main focus of Ferrous Metals Properties of Metals Characteristics of Ferrous.
Do Now! Describe how aluminium can rust, and how it’s different to rusting iron (use the information found in the “Iron and Aluminium” worksheet) Aluminum.

Do Now! Describe how aluminium can rust, and how it’s different to rusting iron (use the information found in the “Iron and Aluminium” worksheet) Aluminum.
LDC borstplätering www.ldc-brushplating.com2 LDC Portable Electroplating 1.Cold process: Used at room temperature, no stress or adjustments because of.

LDC borstplätering LDC Portable Electroplating 1.Cold process: Used at room temperature, no stress or adjustments because of.
Metal Finishes Learning Intention: Understand how and why metals are finished.

Metal Finishes Learning Intention: Understand how and why metals are finished.
www.ldc-brushplating.com2 3 LDC borstplätering LDC Portable Electroplating 1.Cold process: Used at room temperature, no stress or adjustments because.

3 LDC borstplätering LDC Portable Electroplating 1.Cold process: Used at room temperature, no stress or adjustments because.
Heavy Engineering & Reclamation Specialists. Baker & Provan Capability Heavy Engineering –Reclamation Specialists –Machining, –Fabrication, –Assembly.

Heavy Engineering & Reclamation Specialists. Baker & Provan Capability Heavy Engineering –Reclamation Specialists –Machining, –Fabrication, –Assembly.
Chapter 5 Ferrous Alloys.

Chapter 5 Ferrous Alloys.
2 LDC borstplätering Tel: +46 248 17440 Brush plating in the valveseat pockets for corrosion protection.

2 LDC borstplätering Tel: Brush plating in the valveseat pockets for corrosion protection.
Dean R Walters Chamber and Bellows Jan. 5, 2006 1 Summary Chamber The plan is to construct a chamber made of 316LN stainless steel with.

Dean R Walters Chamber and Bellows Jan. 5, Summary Chamber The plan is to construct a chamber made of 316LN stainless steel with.
Nonmetal Gases  Noble gases and diatomic elements (except bromine, and iodine)  These all have only London dispersion forces.  These are very weak intermolecular.

Nonmetal Gases  Noble gases and diatomic elements (except bromine, and iodine)  These all have only London dispersion forces.  These are very weak intermolecular.

Similar presentations

Ads by Google