Presentation is loading. Please wait.

Presentation is loading. Please wait.

I can’t get my image to display through the projector. 1. Make sure the correct source is selected. 2. Check to see all connections are secure. 3. If.

Similar presentations


Presentation on theme: "I can’t get my image to display through the projector. 1. Make sure the correct source is selected. 2. Check to see all connections are secure. 3. If."— Presentation transcript:

1

2 I can’t get my image to display through the projector. 1. Make sure the correct source is selected. 2. Check to see all connections are secure. 3. If problem still persists, reboot Crestron and start over.

3 There is no sound coming from the PC or VHS/DVD/Blu-ray. 1. Make sure the system is not on MUTE. 2. Make sure connections are secure. 3. Reboot Crestron and start over.

4 I can’t log into the PC. 1. Make sure user is using the correct credentials. 2. Check to see if Ethernet is secure in back of PC/Mac. 3. Hard shutdown the PC (Hold power button for 10 seconds) and restart

5 The screen won’t lower. 1. Turn system off and turn back on. 2. Is screen manual or controlled by a switch on the wall? 3. Reboot Crestron.

6 The mouse or keyboard is unresponsive. 1. Make sure connection is secure in back of PC. 2. Replace mouse or keyboard.

7 Touch panel is not responding. 1. Is it plugged in? 2. Reboot Crestron.

8 Document Camera is broken. 1. Make sure Document Camera is powered up and selected on Touch Panel. 2. Make sure connections are secure.

9 Tape stuck in VHS. 1. Try pulling power from VHS/DVD and plug back in, try to eject. 2. Replace unit and bring back to the shop for repair.

10 Laptop is not displaying. 1. Make sure the correct source is selected. 2. Check to see if VGA is secure into the laptop. 3. Fn+F8 or  +P

11 Only one projector displaying in dual-display rooms. 1. Make sure ‘Dual Display’ was originally selected on touch panel. 2. Reboot Crestron.

12 I can’t see anything on the monitor. 1. Check to see if PC is powered on. 2. Make sure Monitor is powered on and correct monitor source is selected. 3. Check connections.

13 Check Power’ is showing on the touch panel. 1. Make sure source selected is powered up.

14 ‘There are no controls for this device’ shows on touch panel. 1. There are no controls on the touch panel for device selected, e.g. there is no PC controls on the touch panel.

15 QUIZ O https://tcnj.qualtrics.com//SE/?SID=SV_6J 66cpRWb0dkg3H https://tcnj.qualtrics.com//SE/?SID=SV_6J 66cpRWb0dkg3H


Download ppt "I can’t get my image to display through the projector. 1. Make sure the correct source is selected. 2. Check to see all connections are secure. 3. If."

Similar presentations


Ads by Google