1. Activités mécaniques 17 septembre 2013 D. Laporte F. De Matos / Y. Orain / P. Ghislain Atlas / SLHC

2. Modélisation calorimètre – Barrel – Endcap C&D – Présampler – Analyse X0 : Barrel : finie Présampler : finie Endcap C : 95 % Endcap D :

3. Coldchuck Cf mail de filipe du 06 juin (poster)

4. IBL : loading at SR1

5. IBL central ring (100% Made in LPNHE) 2 pièces  7 Pièces Matière : PEEK  PAI (Polyamide-imide) 1,2 gramme

6. IBL Fitting

7. IBL piping To help LAPP team (IN2P3) – Design tools to protect transfert lines – Date : end of 2013 to june 2014

8. Stiff tubes (14mm OD) Flexible tubes (18mm OD) Foam box with vacuum terminal and concentric split Routing in IDEP Side C. 14x 3mm OD tubes bundled in insulation 13mm bundle diameter + 13mm insulation (40mm OD) Designed by Eric Richards, Atlas PO

9. Routing in IDEP Side A. Stiff tubes (14mm OD) Flexible tubes (18mm OD) Foam box with vacuum terminal and concentric split 14x 3mm OD tubes bundled in insulation 13mm bundle diameter + 13mm insulation (40mm OD) Designed by Eric Richards, Atlas PO

10. Ca 90 cm IBL Vacuum lines Bundle wrapped in aluminum tape with 13mm insulation thickness (2x13+14=50mmOD) IDEP CAD integration: Erik Richards Vacuum terminals and concentric splitting in IDEP Flattened out tubes in between 25mm foam plates compressed by plates and stand-offs

11. Banc test : – Circuit Glycol + water -> CO² ? https://indico.cern.ch/conferenceDisplay.py?confId=272541 https://indico.cern.ch/conferenceDisplay.py?confId=272541 – Thermal mockup ? X0 : – contact with CMS at CERN Design / simulation – Cartigny (with CPPM) : a new pixel with IBL staves to 2020 – New design :? – A lot of ideas : https://indico.cern.ch/conferenceDisplay.py?confId=233332 https://indico.cern.ch/conferenceDisplay.py?confId=233332 Next