1. A) PELLEGAIA cut view Filler Granular -> Crush -> Knead -> Cement (less than 5%) & water

2. B) PELLEGAIA working mechanism Outer scraper To scrape the material toward inner working area. Rotor arm Inner scraper To scrape the material toward outer working area. Outer blade Clockwise To scrape the material upward. Anti clockwise To knead and press the material. Rotor (knife type blade) To crush the material and make into granular. Outer blade arm Inner blade Clockwise To scrape the material upward. Anti clockwise To knead and press the material. Rotor rotation The both in clockwise and anti clockwise. Rotor arm rotation The both in clockwise and anti clockwise.

3. C) PELLEGAIA Pictures for rotor and blade in working. Rotor To crush the material and make into granular. Blade Working in clockwise To scrape the material upward. Blade Working in anti clockwise To knead and press the material.

4. D) PELLEGAIA Line up

5. E) PELLEGAIA Specification Capacity: 1) Batch system: To feed from top and to discharge from bottom 2) Required time for one batch: 5mimutes including feed and discharge time. 3) Mixing proportion: Filler 80% + Water 15% + Cement 5%