1. Sandblasted, repainted fender brackets

2. Mudflaps and rubber buttons to attach them

3. Mudflap mounted on the fender

4. Right rear fender mounted in place

5. Left rear fender mounted in place

6. A view of the rear fenders mounted

7. Cooling shroud mounted over the fan

8. Backed out into the driveway

9. Problems with the spark plug lead wire from the coil, the NGK end is suspect

10. Checking wires from the coil to the spark plug

11. Time for a test drive up and down Tuyll Street

12. Fantastik does a great job for cleaning the shrouds

13. Metal heat shield under the shroud protects it from the heat of the muffler pipe

14. The elbow is turned outwards during summer

15. Turned inwards in Winter or cold months

16. Mounted over the exhaust pipe, ready for the large shroud

17. The flexible union goes between

18. The big cooling shroud is mounted in place and the air filter box as well

19. You can see the plastic tray shroud below the fan shroud

20. One more tray shroud to put in place below the large shroud and attaches to the end of the frame

21. Shroud installation almost finished – cable to the hot air flap installed

22. That spring loaded flap must be well greased and/or frequently oiled.

23. So much for working outside – more now, and lots of it

24. A new tail light had no wiring, I’ll use the old wiring after cleaning the ends. NEVER throw anything away.

25. Strip what’s usable and then you can toss the bits

26. Lower shroud installed – frame rails covered with window glaziers tape ready to mount the furgone

27. Air tube from the cylinder head exhaust tube attached to the air filter box

28. Ready to mount the furgone. No pictures of the installation, all hands required

29. Furgone mounted and backed outside

30. Lots of bolts and screws to mount it to the frame

31. Left front

32. Sunshine on the door

33. ¾ view, right side

34. Right side showing reflectors front and rear

35. The reflectors help at night

36. Upper and lower tailgates installed

37. Extra red reflectors at the rear corners

38. Furgone interior light

39. 8amp fuseholder for the furgone interior light

40. And it works but needs attention, quite corroded