Presentation is loading. Please wait.

Presentation is loading. Please wait.

Custom USB Case Ditch the old plastic case for something special in just ten easy steps. Chad Baxter.

Similar presentations


Presentation on theme: "Custom USB Case Ditch the old plastic case for something special in just ten easy steps. Chad Baxter."— Presentation transcript:

1

2 Custom USB Case Ditch the old plastic case for something special in just ten easy steps. Chad Baxter

3 What You Will Need: USB Flash Drive Dollar Bill Clear Office Tape Small Toolkit (Small Flat Screwdriver Should Do) Patience Baxter 2

4 Disclaimer: For this tutorial we will use a Sandisk Cruzer, if you have any type of Sandisk Flash Drive, this tutorial should work for you. Modifying any electronic device includes some form of risk. Any data on the drive should be backed up. You should also keep the original case, you might need it. Flash drives are resilient and pretty hard to break, but if you do happen to break it in the process, don’t shoot the messenger. Baxter 3

5 4

6 Step #1 Crack open the case: Every USB is different, some are harder to open then others. Opening a USB can be risky so first, back up any data before you open it. Find any ridges along the casing and work the small screwdriver into them, keep doing this until all you have is a small PCB with a USB connector. Baxter 5

7 Step #2 Fold the bill in half lengthwise. Baxter 6

8 Step #3 Fold the two sides into the center lengthwise. Baxter 7

9 Step #4 Add the flash drive under one flap and over the other an inch from one end. Baxter 8

10 Step #5 Fold the short end over the drive. Baxter 9

11 Step #6 Wrap the long end of the bill tightly until the bill is completely wrapped around the drive. WARNING: DO NOT CUT THE BILL, IT DOES NOT NEED TO BE CUT. Baxter 10

12 Step #7 Line tape up to the top left corner of the drive and wrap it around the drive twice. Baxter 11

13 Step #8 Line tape up to the bottom left corner of the drive and wrap it around the drive twice. Baxter 12

14 Step #9 Line the tape up with the top of the new case, then wrap it around the bottom end of the drive and continue on to the next step. Baxter 13

15 Step #10 Cut the tape to size and press it to the flash drive. Baxter 14

16 Done! Your new USB flash drive cover is complete! Hold on to the old plastic cover cause you might need your dollar back some day! Baxter 15


Download ppt "Custom USB Case Ditch the old plastic case for something special in just ten easy steps. Chad Baxter."

Similar presentations


Ads by Google