1. Clutch “washer mod” or “contact button mod”

3. “washer mod” (30 minutes max!)

4. No oil will leak out on removal

6. 6mm 10mm 1/16” thick.06mm Stock Harley chromed washer CCI part # 35604

7. Washer installed

8. Make sure washer does not foul rubber gasket # 2 on re- fitting

9. Slight gap – can affect 100 th anniversary cover re-fitting

10. “contact button mod”

12. Contact button removal Remove snap ring # 1 Remove lifter guide # 3 Contact button is removed with # 3 as one assembly Contact button part # is 36780-01K (cost +/- $2.60) Remove button from lifter guide as shown in next slide Machine.060” from the face of the large end

13. Tap as shown or use a brass drift