Download presentation
Presentation is loading. Please wait.
Published byIliana Hatcher Modified over 10 years ago
1
By Janice Levi and Bill Berry
2
By Janice Levi
11
By Bill Berry
12
4 3/4”
14
Part In Part Off
15
Make small indention with Skew
17
1 – 3/8”
19
1 -5/8”
20
Drill ¼” Hole 1” Deep
22
Hollow with 1” Round Nose Scraper
23
Measure Inside With “Template”
24
Instructions for making Template (2) Wooden Tongue Depressors (Hobby Lobby) (1) Steel Washer 1-3/8” OD Hot Glue Gun
25
1- 3/8” OD Steel Washer
27
Hot Glue Steel Washer to Tongue Depressor
28
Layout 8 holes with awl on outside line
29
Nice Work Bill, Now drill them…
30
Drill 8 holes ½” deep with 3/32” drill bit
33
Repeat the procedure on the other half. Then glue halves together.
35
Align Grain and Glue Halves Together.
36
1-3/8” ID
42
Turn ball round maintaining consistent wall thickness
45
Rough Shape and Part Off
46
Use ¼” Tenon to Friction drive ball
47
Rotate ball between centers to Finalize Shape
48
1 / 4” to 3/8” Turn grooves in ball with skew or three point tool.
49
Darken Grooves
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.