2. Model 695AV 1. Dissasembly To replace the spring, or clean any of the internal components of the valve, proceed in the following manner: A.Cut the seal thread with pliers and extract the characteristic plate. B.Extract the safety washer, loosen the hand wheel. C.Holding the rod, unscrew the spring press until you note a releasing of the spring. D.Extract the spring with the adapted tool. DISSAEMBLY AND ASSEMBLY

3. Model 695AV DISSAEMBLY AND ASSEMBLY 2. Assembly A.Enter the spring through the upper part of the rod. B.Screw the spring press holding the rod. C.Adjust the set pressure. D.Mount the hand wheel.

4. Model 695AV ADJUSTING THE SET PRESSURE A.Cut the seal thread with pliers and extract the characteristic plate. B.Extract the safety ring, loosen the hand wheel. C.Adjust the set pressure screwing or unscrewing the spring press and holding the rod. D.Mount the hand wheel and the safety ring. IMPORTANT We advice that the adjustment or readjustment of the set pressure and the exchange of the seal should be done in our installations, with original and warranted spare parts.