1. 1 Check all equipment is included before returning. If you have an accident or the equipment is damaged or you need support please contact Blaize. 01943 607030 The Mobile Cinema Equipment: comes in 6 carrying cases (see picture). The leads are in with each piece of equipment. There is an instruction guide provided for easy set up and use and detailed manuals in the projector box in case you need them. 1)Blu-ray Disc Player 2)Projector 3)Speaker 4)Speaker 5)Speaker Stands 6)Screen

2. 2 The Equipment SPEAKERS 1&2 (Plus Stands) PROJECTOR SCREEN NOTE: Mains Leads, Extension Leads, Remote Controls & Manuals are stored in the bottom of the projector box.

3. 3 NOTE: When putting the canvas on or off the screen frame, please do so flat on the floor using the dust sheet provided. The screen is easily dirtied. Never place any object on the screen. The Screen NOTE: There are 2 screen fabrics. One for Back Projection and one for Front Projection. Make sure you use the correct one.

4. 4 How It Works SPEAKER 1 (Stereo Left) SPEAKER 2 (Stereo Right) PROJECTOR SCREEN The Projector should be 12 to 15 feet behind the screen. The Blu-ray Player plays the DVD, sends sound to the Speakers and sends a picture to the Projector Speaker (1). Receives sound from the DVD, Both speakers have a built in amplifier and volume control Speaker (2). Receives sound from the DVD, Both speakers have a built in amplifier and volume control Audience The Screen displays at the front what the projector throws onto the BACK of it. The Projector receives pictures from the Player and projects them onto the BACK of the Screen

5. 5 The Leads SPEAKER 2 Right Hand PROJECTOR Side View SPEAKER 1 Left Hand IMPORTANT! On each speaker there is a volume control. Set this anticlockwise to almost zero before switching on. (this avoids loud bumps and bangs (which may damage speakers and ears!) In the back of the Blu-Ray player box are... 1) A permanent mains lead. Plug it into the mains board supplied 2) A permanent pair of audio leads coded Red (Right) and White (Left). These go to the appropriate speakers similarly coded.. 3) A Digital Video Lead coded Blu. This goes to the ‘DVI D In’ socket on the projector. (Also coded Blu) In each Speaker Bag is a mains lead. Plug it into the speaker and into the mains board supplied. In the Projector Box is a mains lead. This plugs into the projector and into the mains board supplied

6. 6 The Projector (On & Off) NOTE: Always allow the projector to cool down before moving and packing away. TURNING ON THE PROJECTOR: 1)Remove Lens Cap 2)Click On-Off Switch to On. The power indicator light goes RED entering standby mode.. Power On-Off c Power Indicator 3)Press the ON button on the back of the projector. The indicator now lights GREEN, the cooling fan starts, the projector starts up shows a light blue rectangle on the screen. TURNING OFF THE PROJECTOR: (AFTER THE SHOW) 1) Press the Standby button on the back of the projector. ‘Power Off’ appears on the screen. 2) Press the ON/Standby button again. The picture turns off and the. Power Indicator turns Orange. 3) The fan continues to run for 90 seconds. 4) Do not switch off and unplug the projector until the fan stops. 5) Allow the projector to cool down further before moving and packing away.

7. 7 The Projector: Remote Control LENS SHIFT: To adjust position of picture. ZOOM: To adjust size of picture. FOCUS: To sharpen the picture ASPECT: Clicks between Wide Screen & Normal. DIRECTIONAL ARROWS: To navigate and select when exploring menus.. MENU: Open & Close Menus. ON SCREEN: Turns menu display function OFF & ON. BEWARE! SHUTTER: Blanks Screen. BEWARE! ALWAYS POINT THE CONTROLLER AT THE PLAYER AND NOT AT THE SCREEN. NOTE: Controls are duplicated on back of projector,

8. 8 The Blu-ray Disc Player Picture of DVD front Panel 1) Press to Turn On/Standby. Screen will eventually show “No Disc Inserted” 2) Press to Open. Next insert Disc and press again to close. Opening menu appears. 3) Press button to play Disc NOTE: The Player works exactly like the one you have at home.. Insert a Disc and menus appear on the screen There is a remote included. Please experiment to gain experience in using this. There is a manual in the projector box.

9. 9 Blu-ray Disc Player: Remote Control ALWAYS POINT THE CONTROLLER AT THE PLAYER AND NOT AT THE SCREEN. When you have inserted the Disc and pressed PLAY either on the Player or on the Remote Controller, the Player may begin to play a series of adverts. To skip these and go to the main feature, click TOP MENU button. DIRECTIONAL ARROWS & OK: To navigate and select when exploring menus..

10. 10 “Do’s” & “Don’ts” “Do’s” & “Don’ts” DON’T! 1)Don’t put any drinks near electrical equipment. 2)At a family event, don’t allow children near the equipment including remote controls 3)Don’t tug on cables to remove them. 4)Don’t remove any casings, dismantle any equipment or put fingers into any of the equipment. 5)Don’t force connections 6)Don’t move projector when switched on 7)Don’t turn projector off until the fan finishes cooling 8)Don’t put projector in the case until cool 1)Remember this is a BACK PROJECTION system. The projector goes behind the screen. This keeps all cables away from the audience. Be Tidy for Health & Safety 2)Try putting the Projector backed into a corner of the room. This maximises space and keeps it safe. 3)Place the Projector on a table about 12 feet behind the screen for best results 4)Place the Speakers behind the screen on either side. 5)Keep cables tidy to avoid tripping over them 6)Put all equipment, leads and manuals back where and as you found them. 7)Check all equipment is together and return all 5 bags to the store DO! DO! DO NOT Unplug from the wall before the projector fan has finished cooling!!!!

11. 11 Frequently Asked Questions: 1 QUESTION: What if, when we have set up, the picture has sloping sides? QUESTION: Can I play ordinary DVD’s? ANSWER: If the top and bottom of the picture are not level, then the screen is not square on to the projector. If the left and right side of the picture are sloping, this is adjustable in the projector.. To correct this select the Menu Screen by clicking the MENU button. From the on screen menus navigate to POSITION and then to KEYSTONE. Now use the direction arrows to correct the slope. QUESTION: What if because of our room setup we want to put the projector in front of the screen? ANSWER: You can do this, but you will notice that the picture for the audience will appear back to front. To correct this select the Menu Screen by clicking the MENU button. From the on screen menus navigate to PROJECTOR SETUP and then to INSTALLATIONS. Select FRONT/FLOOR for front projection and REAR/FLOOR to return to back projection at the end of the evening. IF YOU USE FRONT PROJECTION BE VERY CAREFUL OF CABLES ETC. ANSWER: Yes! NB: For other trouble shooting tips please consult Page 33 of the Projector Manual. Or Page 30 of the Blu Ray Player Manual.